This object initiates the polling and stores the status
of the last DMT Bin request. This object can have the
following values :
reset (-1) : write this value to reset the
the finite state machine (FSM)
that controls the reading of
bin information on a DMT
interface.
pollNow (1) : write this value to begin bin
polling on an interface specified
in cAdslDmtBinIfNumber.
noIfConfigured(2) : status read when no valid
interface is set in
cAdslDmtBinIfNumber
ifConfigured(3) : status read when a valid
interface is set in
cAdslDmtBinIfNumber
rqstInProgress(4) : status returned until the
data collection is complete
on an interface.
lcDownForIf (5) : status returned if the line
card is down for the
interface.
ifUntrained (6) : status returned if the interface
on the DSLAM is untrained.
failure (7) : status returned when the request
cannot be completed due to
error.
success (8) : status returned when bin data
collection has been properly
completed.
Data collected on a status of success (8) will be available in
cAdslAtucDmtBinTable and cAdslAturDmtBinTable. A read of this
object can return any value between 2 and 8, while a write can
only be set to the value of 1 or -1.
Parsed from file CISCO-ADSL-DMT-LINE-MIB.mib
Module: CISCO-ADSL-DMT-LINE-MIB
This object initiates the polling and stores the status
of the last DMT Bin request. This object can have the
following values :
reset (-1) : write this value to reset the
the finite state machine (FSM)
that controls the reading of
bin information on a DMT
interface.
pollNow (1) : write this value to begin bin
polling on an interface specified
in cAdslDmtBinIfNumber.
noIfConfigured(2) : status read when no valid
interface is set in
cAdslDmtBinIfNumber
ifConfigured(3) : status read when a valid
interface is set in
cAdslDmtBinIfNumber
rqstInProgress(4) : status returned until the
data collection is complete
on an interface.
lcDownForIf (5) : status returned if the line
card is down for the
interface.
ifUntrained (6) : status returned if the interface
on the DSLAM is untrained.
failure (7) : status returned when the request
cannot be completed due to
error.
success (8) : status returned when bin data
collection has been properly
completed.
Data collected on a status of success (8) will be available in
cAdslAtucDmtBinTable and cAdslAturDmtBinTable. A read of this
object can return any value between 2 and 8, while a write can
only be set to the value of 1 or -1.
This object initiates the polling and stores the status
of the last DMT Bin request. This object can have the
following values :
reset (-1) : write this value to reset the
the finite state machine (FSM)
that controls the reading of
bin information on a DMT
interface.
pollNow (1) : write this value to begin bin
polling on an interface specified
in cAdslDmtBinIfNumber.
noIfConfigured(2) : status read when no valid
interface is set in
cAdslDmtBinIfNumber
ifConfigured(3) : status read when a valid
interface is set in
cAdslDmtBinIfNumber
rqstInProgress(4) : status returned until the
data collection is complete
on an interface.
lcDownForIf (5) : status returned if the line
card is down for the
interface.
ifUntrained (6) : status returned if the interface
on the DSLAM is untrained.
failure (7) : status returned when the request
cannot be completed due to
error.
success (8) : status returned when bin data
collection has been properly
completed.
Data collected on a status of success (8) will be available in
cAdslAtucDmtBinTable and cAdslAturDmtBinTable. A read of this
object can return any value between 2 and 8, while a write can
only be set to the value of 1 or -1.
Parsed from file CISCO-ADSL-DMT-LINE-MIB.my.txt
Company: None
Module: CISCO-ADSL-DMT-LINE-MIB
This object initiates the polling and stores the status
of the last DMT Bin request. This object can have the
following values :
reset (-1) : write this value to reset the
the finite state machine (FSM)
that controls the reading of
bin information on a DMT
interface.
pollNow (1) : write this value to begin bin
polling on an interface specified
in cAdslDmtBinIfNumber.
noIfConfigured(2) : status read when no valid
interface is set in
cAdslDmtBinIfNumber
ifConfigured(3) : status read when a valid
interface is set in
cAdslDmtBinIfNumber
rqstInProgress(4) : status returned until the
data collection is complete
on an interface.
lcDownForIf (5) : status returned if the line
card is down for the
interface.
ifUntrained (6) : status returned if the interface
on the DSLAM is untrained.
failure (7) : status returned when the request
cannot be completed due to
error.
success (8) : status returned when bin data
collection has been properly
completed.
Data collected on a status of success (8) will be available in
cAdslAtucDmtBinTable and cAdslAturDmtBinTable. A read of this
object can return any value between 2 and 8, while a write can
only be set to the value of 1 or -1.
cAdslDmtBinIfRqstStatus OBJECT-TYPE SYNTAX INTEGER { reset (-1), pollNow (1), noIfConfigured (2), ifConfigured (3), rqstInProgess (4), lcDownForIf (5), ifUntrained (6), failure (7), success (8) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object initiates the polling and stores the status of the last DMT Bin request. This object can have the following values : reset (-1) : write this value to reset the the finite state machine (FSM) that controls the reading of bin information on a DMT interface. pollNow (1) : write this value to begin bin polling on an interface specified in cAdslDmtBinIfNumber. noIfConfigured(2) : status read when no valid interface is set in cAdslDmtBinIfNumber ifConfigured(3) : status read when a valid interface is set in cAdslDmtBinIfNumber rqstInProgress(4) : status returned until the data collection is complete on an interface. lcDownForIf (5) : status returned if the line card is down for the interface. ifUntrained (6) : status returned if the interface on the DSLAM is untrained. failure (7) : status returned when the request cannot be completed due to error. success (8) : status returned when bin data collection has been properly completed. Data collected on a status of success (8) will be available in cAdslAtucDmtBinTable and cAdslAturDmtBinTable. A read of this object can return any value between 2 and 8, while a write can only be set to the value of 1 or -1." ::= { ciscoAdslDmtLineMIBObjects 17}
cAdslDmtBinIfRqstStatus OBJECT-TYPE SYNTAX INTEGER { pollNow(1), noIfConfigured(2), ifConfigured(3), rqstInProgess(4), lcDownForIf(5), ifUntrained(6), failure(7), success(8) } ACCESS read-write STATUS mandatory DESCRIPTION "This object initiates the polling and stores the status of the last DMT Bin request. This object can have the following values : reset (-1) : write this value to reset the the finite state machine (FSM) that controls the reading of bin information on a DMT interface. pollNow (1) : write this value to begin bin polling on an interface specified in cAdslDmtBinIfNumber. noIfConfigured(2) : status read when no valid interface is set in cAdslDmtBinIfNumber ifConfigured(3) : status read when a valid interface is set in cAdslDmtBinIfNumber rqstInProgress(4) : status returned until the data collection is complete on an interface. lcDownForIf (5) : status returned if the line card is down for the interface. ifUntrained (6) : status returned if the interface on the DSLAM is untrained. failure (7) : status returned when the request cannot be completed due to error. success (8) : status returned when bin data collection has been properly completed. Data collected on a status of success (8) will be available in cAdslAtucDmtBinTable and cAdslAturDmtBinTable. A read of this object can return any value between 2 and 8, while a write can only be set to the value of 1 or -1." ::= { ciscoAdslDmtLineMIBObjects 17 }
Vendor: Cisco
Module: CISCO-ADSL-DMT-LINE-MIB
[Automatically extracted from oidview.com]
cAdslDmtBinIfRqstStatus OBJECT-TYPE SYNTAX INTEGER { reset (-1), pollNow (1), noIfConfigured (2), ifConfigured (3), rqstInProgess (4), lcDownForIf (5), ifUntrained (6), failure (7), success (8) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object initiates the polling and stores the status of the last DMT Bin request. This object can have the following values : reset (-1) : write this value to reset the the finite state machine (FSM) that controls the reading of bin information on a DMT interface. pollNow (1) : write this value to begin bin polling on an interface specified in cAdslDmtBinIfNumber. noIfConfigured(2) : status read when no valid interface is set in cAdslDmtBinIfNumber ifConfigured(3) : status read when a valid interface is set in cAdslDmtBinIfNumber rqstInProgress(4) : status returned until the data collection is complete on an interface. lcDownForIf (5) : status returned if the line card is down for the interface. ifUntrained (6) : status returned if the interface on the DSLAM is untrained. failure (7) : status returned when the request cannot be completed due to error. success (8) : status returned when bin data collection has been properly completed. Data collected on a status of success (8) will be available in cAdslAtucDmtBinTable and cAdslAturDmtBinTable. A read of this object can return any value between 2 and 8, while a write can only be set to the value of 1 or -1." ::= { ciscoAdslDmtLineMIBObjects 17}
cAdslDmtBinIfRqstStatus OBJECT-TYPE SYNTAX INTEGER { reset (-1), pollNow (1), noIfConfigured (2), ifConfigured (3), rqstInProgess (4), lcDownForIf (5), ifUntrained (6), failure (7), success (8) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object initiates the polling and stores the status of the last DMT Bin request. This object can have the following values : reset (-1) : write this value to reset the the finite state machine (FSM) that controls the reading of bin information on a DMT interface. pollNow (1) : write this value to begin bin polling on an interface specified in cAdslDmtBinIfNumber. noIfConfigured(2) : status read when no valid interface is set in cAdslDmtBinIfNumber ifConfigured(3) : status read when a valid interface is set in cAdslDmtBinIfNumber rqstInProgress(4) : status returned until the data collection is complete on an interface. lcDownForIf (5) : status returned if the line card is down for the interface. ifUntrained (6) : status returned if the interface on the DSLAM is untrained. failure (7) : status returned when the request cannot be completed due to error. success (8) : status returned when bin data collection has been properly completed. Data collected on a status of success (8) will be available in cAdslAtucDmtBinTable and cAdslAturDmtBinTable. A read of this object can return any value between 2 and 8, while a write can only be set to the value of 1 or -1." ::= { ciscoAdslDmtLineMIBObjects 17}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.130.1.17.0 | cAdslDmtBinIfRqstStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.130.1.1 | cAdslDmtLineTable | 1 | 2 | This table extends the adslLineTable and contains enterprise- specific common attributes describing both ends of ADSL lines suppo… |
| 1.3.6.1.4.1.9.9.130.1.2 | cAdslAtucDmtPhysTable | 1 | 2 | This table extends the adslAtucPhysTable and contains enterprise-specific physical layer parameters for ATU-C class devices suppo… |
| 1.3.6.1.4.1.9.9.130.1.4 | cAdslAtucDmtChanTable | 1 | 3 | This table extends the adslAtucChanTable and contains enterprise-specific physical layer parameters for the ATU-C channels suppor… |
| 1.3.6.1.4.1.9.9.130.1.5 | cAdslAturDmtChanTable | 1 | 3 | This table extends the adslAturChanTable and contains enterprise-specific physical layer parameters for the ATU-R channels suppor… |
| 1.3.6.1.4.1.9.9.130.1.14 | cAdslDmtLineConfProfileTable | 1 | 15 | This table extends the adslLineConfProfileTable and contains enterprise-specific ADSL DMT line configuration information. |
| 1.3.6.1.4.1.9.9.130.1.15 | cAdslDmtLineAlarmConfProfileTable | 1 | 3 | This table extends the adslLineAlarmConfProfileTable and contains enterprise-specific ADSL line configuration information pertain… |
| 1.3.6.1.4.1.9.9.130.1.16 | cAdslDmtBinIfNumber | 1 | 1 | The cAdslDmtBinIfNumber is used to set the ifIndex for for which DMT bin information will be collected in cAdslAtucDmtBinTable an… |
| 1.3.6.1.4.1.9.9.130.1.18 | cAdslDmtBinIfLstRqstUpldTime | 1 | 1 | cAdslDmtBinIfLstRqstUpldTime stores the time and date when the last successful upload request was done. This field is used to det… |
| 1.3.6.1.4.1.9.9.130.1.19 | cAdslAtucDmtBinTable | 1 | 6 | This table contains information on the 256 DMT bins in the downstream direction. Bins correspond to 4 kHz slots on a trained DSL … |
| 1.3.6.1.4.1.9.9.130.1.20 | cAdslAturDmtBinTable | 1 | 6 | This table contains information for the 32 DMT bins in the upstream direction. A bin corresponds to a 4 kHz slots on a trained DS… |