The count of both BPVs(Bipolar Violations) and EXZs(Excessive
Zeros) encountered by a T3/E3 interface.An EXZ increments
the LCV by one regardless of the length of the zero string.
Parsed from file CISCO-DS3-MIB.mib
Module: CISCO-DS3-MIB
The count of both BPVs(Bipolar Violations) and EXZs(Excessive
Zeros) encountered by a T3/E3 interface.An EXZ increments
the LCV by one regardless of the length of the zero string.
The count of both BPVs(Bipolar Violations) and EXZs(Excessive
Zeros) encountered by a T3/E3 interface.An EXZ increments
the LCV by one regardless of the length of the zero string.
Parsed from file CISCO-DS3-MIB.my.txt
Company: None
Module: CISCO-DS3-MIB
The count of both BPVs(Bipolar Violations) and EXZs(Excessive
Zeros) encountered by a T3/E3 interface.An EXZ increments
the LCV by one regardless of the length of the zero string.
cds3LCVCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of both BPVs(Bipolar Violations) and EXZs(Excessive Zeros) encountered by a T3/E3 interface.An EXZ increments the LCV by one regardless of the length of the zero string." REFERENCE "RFC2496 Section 2.4.1." ::= { cds3StatsEntry 7 }
cds3LCVCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of both BPVs(Bipolar Violations) and EXZs(Excessive Zeros) encountered by a T3/E3 interface.An EXZ increments the LCV by one regardless of the length of the zero string." REFERENCE "RFC2496 Section 2.4.1." ::= { cds3StatsEntry 7 }
Vendor: Cisco
Module: CISCO-DS3-MIB
[Automatically extracted from oidview.com]
cds3LCVCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of both BPVs(Bipolar Violations) and EXZs(Excessive Zeros) encountered by a T3/E3 interface.An EXZ increments the LCV by one regardless of the length of the zero string." REFERENCE "RFC2496 Section 2.4.1." ::= { cds3StatsEntry 7 }
cds3LCVCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of both BPVs(Bipolar Violations) and EXZs(Excessive Zeros) encountered by a T3/E3 interface.An EXZ increments the LCV by one regardless of the length of the zero string." REFERENCE "RFC2496 Section 2.4.1." ::= { cds3StatsEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.132.1.3.1.1.1 | cds3RcvLOSCount | 0 | 0 | The number of times Loss of Signal was detected with or without integrating to LOS alarm. |
1.3.6.1.4.1.9.9.132.1.3.1.1.2 | cds3RcvOOFCount | 0 | 0 | The number of times Out of Frame was detected with or without integrating to OOF alarm. |
1.3.6.1.4.1.9.9.132.1.3.1.1.3 | cds3RAICount | 0 | 0 | The number of timesRemote Alarm Indication was detected with or without integrating to RAI alarm. |
1.3.6.1.4.1.9.9.132.1.3.1.1.4 | cds3CCVCount | 0 | 0 | The counter associated with the number of C-Bit Coding Violations encountered by a T3/E3 interface. |
1.3.6.1.4.1.9.9.132.1.3.1.1.5 | cds3FECount | 0 | 0 | The number of Framing Errors encountered by a T3/E3 interface. |
1.3.6.1.4.1.9.9.132.1.3.1.1.6 | cds3EXZSCount | 0 | 0 | The number of Excessive Zeros(EXZ) by a T3/E3 interface. An EXZ is the occurrence of any string of zeros having length equal to o… |
1.3.6.1.4.1.9.9.132.1.3.1.1.8 | cds3PCVCount | 0 | 0 | This is the count of P-bit Coding Violation(PCV) error event encountered by DS3 interface. For all DS3 applications, a coding vio… |
1.3.6.1.4.1.9.9.132.1.3.1.1.9 | cds3CPECount | 0 | 0 | The number of C-bit parity errors(CPERR) on a DS3 interface. This value is calculated over noninformation bits in the DS3 frame. |
1.3.6.1.4.1.9.9.132.1.3.1.1.10 | cds3FEBECount | 0 | 0 | The number of Far End Block Errors(FEBE) encountered by a T3/E3 interface.These include frame alignment errors, multiframe alignm… |
1.3.6.1.4.1.9.9.132.1.3.1.1.11 | cds3RcvAISCount | 0 | 0 | The number of times Alarm Indication Signals(AIS) were detected. The AIS indicates that an upstream failure has been detected by… |