The data compression protocols supported by the
calling modem.
This object is a bit map, with each bit representing
a different call type as identified below.
A 1-bit indicates the DC protocol is supported.
A 0-bit indicates the DC protocol is not supported.
Bit 0 - MNP5
Bit 1 - V.42bis in the receive direction
Bit 2 - V.42bis in the transmit direction
V.42bis may be separately available in Rx or Tx
directions. If all bits are zero, no data compression
is supported.
The particular compression selected by the answering
modem is reported in cctmHistoryDataCompression.
Parsed from file CISCO-CALL-TRACKER-MODEM-MIB.mib
Module: CISCO-CALL-TRACKER-MODEM-MIB
The data compression protocols supported by the
calling modem.
This object is a bit map, with each bit representing
a different call type as identified below.
A 1-bit indicates the DC protocol is supported.
A 0-bit indicates the DC protocol is not supported.
Bit 0 - MNP5
Bit 1 - V.42bis in the receive direction
Bit 2 - V.42bis in the transmit direction
V.42bis may be separately available in Rx or Tx
directions. If all bits are zero, no data compression
is supported.
The particular compression selected by the answering
modem is reported in cctmHistoryDataCompression.
The data compression protocols supported by the
calling modem.
This object is a bit map, with each bit representing
a different call type as identified below.
A 1-bit indicates the DC protocol is supported.
A 0-bit indicates the DC protocol is not supported.
Bit 0 - MNP5
Bit 1 - V.42bis in the receive direction
Bit 2 - V.42bis in the transmit direction
V.42bis may be separately available in Rx or Tx
directions. If all bits are zero, no data compression
is supported.
The particular compression selected by the answering
modem is reported in cctmHistoryDataCompression.
Parsed from file CISCO-CALL-TRACKER-MODEM-MIB.my.txt
Company: None
Module: CISCO-CALL-TRACKER-MODEM-MIB
The data compression protocols supported by the
calling modem.
This object is a bit map, with each bit representing
a different call type as identified below.
A 1-bit indicates the DC protocol is supported.
A 0-bit indicates the DC protocol is not supported.
Bit 0 - MNP5
Bit 1 - V.42bis in the receive direction
Bit 2 - V.42bis in the transmit direction
V.42bis may be separately available in Rx or Tx
directions. If all bits are zero, no data compression
is supported.
The particular compression selected by the answering
modem is reported in cctmHistoryDataCompression.
cctmHistorySupportedDC OBJECT-TYPE SYNTAX BITS { mnp5(0), v42bisRx(1), v42bisTx(2), v44Rx(3), v44Tx(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The data compression protocols supported by the calling modem. This object is a bit map, with each bit representing a different call type as identified below. A 1-bit indicates the DC protocol is supported. A 0-bit indicates the DC protocol is not supported. Bit 0 - MNP5 Bit 1 - V.42bis in the receive direction Bit 2 - V.42bis in the transmit direction V.42bis may be separately available in Rx or Tx directions. If all bits are zero, no data compression is supported. The particular compression selected by the answering modem is reported in cctmHistoryDataCompression. " ::= { cctmHistoryEntry 10 }
cctmHistorySupportedDC OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) ACCESS read-only STATUS mandatory DESCRIPTION "The data compression protocols supported by the calling modem. This object is a bit map, with each bit representing a different call type as identified below. A 1-bit indicates the DC protocol is supported. A 0-bit indicates the DC protocol is not supported. Bit 0 - MNP5 Bit 1 - V.42bis in the receive direction Bit 2 - V.42bis in the transmit direction V.42bis may be separately available in Rx or Tx directions. If all bits are zero, no data compression is supported. The particular compression selected by the answering modem is reported in cctmHistoryDataCompression." ::= { cctmHistoryEntry 10 }
Vendor: Cisco
Module: CISCO-CALL-TRACKER-MODEM-MIB
[Automatically extracted from oidview.com]
cctmHistorySupportedDC OBJECT-TYPE SYNTAX BITS { mnp5(0), v42bisRx(1), v42bisTx(2), v44Rx(3), v44Tx(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The data compression protocols supported by the calling modem. This object is a bit map, with each bit representing a different call type as identified below. A 1-bit indicates the DC protocol is supported. A 0-bit indicates the DC protocol is not supported. Bit 0 - MNP5 Bit 1 - V.42bis in the receive direction Bit 2 - V.42bis in the transmit direction V.42bis may be separately available in Rx or Tx directions. If all bits are zero, no data compression is supported. The particular compression selected by the answering modem is reported in cctmHistoryDataCompression. " ::= { cctmHistoryEntry 10 }
cctmHistorySupportedDC OBJECT-TYPE SYNTAX BITS { mnp5(0), v42bisRx(1), v42bisTx(2), v44Rx(3), v44Tx(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The data compression protocols supported by the calling modem. This object is a bit map, with each bit representing a different call type as identified below. A 1-bit indicates the DC protocol is supported. A 0-bit indicates the DC protocol is not supported. Bit 0 - MNP5 Bit 1 - V.42bis in the receive direction Bit 2 - V.42bis in the transmit direction V.42bis may be separately available in Rx or Tx directions. If all bits are zero, no data compression is supported. The particular compression selected by the answering modem is reported in cctmHistoryDataCompression. " ::= { cctmHistoryEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.165.1.2.1.1.1 | cctmHistoryProjectedMaxRxRate | 0 | 0 | Maximum received rate local modem informs remote modem it will support based on initial negotiations. The remote modem will not a… |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.2 | cctmHistoryProjectedMaxTxRate | 0 | 0 | Maximum rate the remote modem indicates it can accept based on initial negotiations. The local modem will not attempt to transmit… |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.3 | cctmHistoryFinalRxRate | 0 | 0 | Final receive data rate for this call. The initial negotiated receive rate is in cctHistoryRxRate. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.4 | cctmHistoryFinalTxRate | 0 | 0 | Final transmit data rate for this call. The initial negotiated transmit rate is in cctHistoryTxRate. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.5 | cctmHistoryAttemptedModulation | 0 | 0 | The initial modulation attempted when the modems began negotiation. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.6 | cctmHistoryInitialModulation | 0 | 0 | The initial negotiated modulation. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.7 | cctmHistoryFinalModulation | 0 | 0 | The final modulation for this call. It is possible for retrains to result in the modulation being renogiated during a call. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.8 | cctmHistoryAttemptedECProtocol | 0 | 0 | The initial modem error correction protocol attempted during call negotiation. The actual EC negotiated is in cctmHistoryECProtoc… |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.9 | cctmHistoryECProtocol | 0 | 0 | The modem error correction protocol negotiated for this call. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.11 | cctmHistoryDataCompression | 0 | 0 | The modem compression protocol selected for this call. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.12 | cctmHistoryRxHighWatermark | 0 | 0 | The maximum receive data rate achieved during this call. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.13 | cctmHistoryRxLowWatermark | 0 | 0 | The minimum receive data rate during this call. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.14 | cctmHistoryTxHighWatermark | 0 | 0 | The maximum transmit data rate achieved during this call. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.15 | cctmHistoryTxLowWatermark | 0 | 0 | The minimum transmit data rate during this call. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.16 | cctmHistoryLocalUpRateShifts | 0 | 0 | The count of locally initiated rate shifts to increase the data rate which were successful. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.17 | cctmHistoryLocalDownRateShifts | 0 | 0 | The count of locally initiated rate shifts to decrease the data rate which were successful. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.18 | cctmHistoryRemoteUpRateShifts | 0 | 0 | The count of remotely initiated rate shifts to increase the data rate which were successful. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.19 | cctmHistoryRemoteDownRateShifts | 0 | 0 | The count of remotely initiated rate shifts to decrease the data rate which were successful. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.20 | cctmHistoryRateShiftFailures | 0 | 0 | The count of rate shift attempts which failed to complete. A failure to complete a rate renegotiation results in a retrain attempt. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.21 | cctmHistoryLocalRetrains | 0 | 0 | The count of locally initiated retrains for the call. Includes successfully completed retrains and those which failed. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.22 | cctmHistoryRemoteRetrains | 0 | 0 | The count of remotely initiated retrains for the call. Includes successfully completed retrains and those which failed. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.23 | cctmHistoryRetrainFailures | 0 | 0 | The count of retrains which failed to complete. A failure to retrain results in another retrain attempt. The call will terminate … |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.24 | cctmHistoryRxLinkOctets | 0 | 0 | The total modem link level octets received during this call. If using Error Correction and Data Compression, this is the compress… |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.25 | cctmHistoryTxLinkOctets | 0 | 0 | The total modem link level octets transmitted during this call. If using Error Correction and Data Compression, this is the compr… |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.26 | cctmHistoryRxECFrames | 0 | 0 | The total number of error correction data frames received successfully. This does not include damaged frames or control frames. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.27 | cctmHistoryTxECFrames | 0 | 0 | The total number of error correction data frames transmitted successfully. This does not include data frame resends or control fra… |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.28 | cctmHistoryRxECNAKs | 0 | 0 | The total number of EC protocol negative acknowledgements (NAK) received. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.29 | cctmHistoryTxECNAKs | 0 | 0 | The total number of EC protocol negative acknowledgements (NAK) sent. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.30 | cctmHistoryRxECFramesBad | 0 | 0 | The total error correction frames received during the call which were determined to be bad. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.31 | cctmHistoryECFramesResent | 0 | 0 | The count of total retransmitted error correction data frames during the call. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.32 | cctmHistoryECLinkTimeouts | 0 | 0 | This counter provides the number of EC link protocol timer expirations which have occurred during the call. This corresponds to t… |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.33 | cctmHistoryRxCharLost | 0 | 0 | The total number of characters received by the modem but were dropped due to host buffer over run. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.34 | cctmHistoryDisconnectReason | 0 | 0 | Code indicating the reason this call was terminated. |
| 1.3.6.1.4.1.9.9.165.1.2.1.1.35 | cctmHistoryDisconnectReasonText | 0 | 0 | Text description of the disconnect reason indicated by cctHistoryDisconnectReason. Value is zero-length string if no text is avai… |