Reference record for OID 1.3.6.1.4.1.9.9.173.1.2.4.1.1



parent
1.3.6.1.4.1.9.9.173.1.2.4.1 (cpvlanTrunkPortEntry)
node code
1
node name
cpvlanTrunkPortDynamicState
dot oid
1.3.6.1.4.1.9.9.173.1.2.4.1.1
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoPrivateVlanMIB(173) cpvlanMIBObjects(1) cpvlanPortObjects(2) cpvlanTrunkPortTable(4) cpvlanTrunkPortEntry(1) cpvlanTrunkPortDynamicState(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoPrivateVlanMIB(173) cpvlanMIBObjects(1) cpvlanPortObjects(2) cpvlanTrunkPortTable(4) cpvlanTrunkPortEntry(1) cpvlanTrunkPortDynamicState(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoPrivateVlanMIB(173) cpvlanMIBObjects(1) cpvlanPortObjects(2) cpvlanTrunkPortTable(4) cpvlanTrunkPortEntry(1) cpvlanTrunkPortDynamicState(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoPrivateVlanMIB(173) cpvlanMIBObjects(1) cpvlanPortObjects(2) cpvlanTrunkPortTable(4) cpvlanTrunkPortEntry(1) cpvlanTrunkPortDynamicState(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoPrivateVlanMIB(173) cpvlanMIBObjects(1) cpvlanPortObjects(2) cpvlanTrunkPortTable(4) cpvlanTrunkPortEntry(1) cpvlanTrunkPortDynamicState(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoPrivateVlanMIB(173) cpvlanMIBObjects(1) cpvlanPortObjects(2) cpvlanTrunkPortTable(4) cpvlanTrunkPortEntry(1) cpvlanTrunkPortDynamicState(1)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoPrivateVlanMIB/cpvlanMIBObjects/cpvlanPortObjects/cpvlanTrunkPortTable/cpvlanTrunkPortEntry/cpvlanTrunkPortDynamicState
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoPrivateVlanMIB/cpvlanMIBObjects/cpvlanPortObjects/cpvlanTrunkPortTable/cpvlanTrunkPortEntry/cpvlanTrunkPortDynamicState
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoPrivateVlanMIB/cpvlanMIBObjects/cpvlanPortObjects/cpvlanTrunkPortTable/cpvlanTrunkPortEntry/cpvlanTrunkPortDynamicState
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoPrivateVlanMIB/cpvlanMIBObjects/cpvlanPortObjects/cpvlanTrunkPortTable/cpvlanTrunkPortEntry/cpvlanTrunkPortDynamicState
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoPrivateVlanMIB/cpvlanMIBObjects/cpvlanPortObjects/cpvlanTrunkPortTable/cpvlanTrunkPortEntry/cpvlanTrunkPortDynamicState
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoPrivateVlanMIB/cpvlanMIBObjects/cpvlanPortObjects/cpvlanTrunkPortTable/cpvlanTrunkPortEntry/cpvlanTrunkPortDynamicState
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/173/1/2/4/1/1

    Description by circitor

    For private VLAN trunk ports, this object allows the
    operator to mandate the trunking behavior of the port

    on(1) dictates that the private VLAN port will always be a
    trunk. If the negotiation is supported on this port,
    negotiation will take place with the far end to attempt to
    bring the far end into trunking state.

    onNoNegotiate(2) is used to indicate that the interface is
    permanently set to be a trunk, and no negotiation takes
    place with the far end on the link to ensure consistent
    operation. This is similar to on(1) except no negotiation
    takes place with the far end.

    If a port does not support negotiation, the value of on(1)
    is not allowed. If the port's cpvlanTrunkPortEncapType is
    set to negotiate(3), onNoNegotiate(2) is not allowed.

    Parsed from file CISCO-PRIVATE-VLAN-MIB.mib
    Module: CISCO-PRIVATE-VLAN-MIB

    Description by cisco_v1

    For private VLAN trunk ports, this object allows the
    operator to mandate the trunking behavior of the port

    on(1) dictates that the private VLAN port will always be a
    trunk. If the negotiation is supported on this port,
    negotiation will take place with the far end to attempt to
    bring the far end into trunking state.

    onNoNegotiate(2) is used to indicate that the interface is
    permanently set to be a trunk, and no negotiation takes
    place with the far end on the link to ensure consistent
    operation. This is similar to on(1) except no negotiation
    takes place with the far end.

    If a port does not support negotiation, the value of on(1)
    is not allowed. If the port's cpvlanTrunkPortEncapType is
    set to negotiate(3), onNoNegotiate(2) is not allowed.

    Description by mibdepot

    For private VLAN trunk ports, this object allows the
    operator to mandate the trunking behavior of the port

    on(1) dictates that the private VLAN port will always be a
    trunk. If the negotiation is supported on this port,
    negotiation will take place with the far end to attempt to
    bring the far end into trunking state.

    onNoNegotiate(2) is used to indicate that the interface is
    permanently set to be a trunk, and no negotiation takes
    place with the far end on the link to ensure consistent
    operation. This is similar to on(1) except no negotiation
    takes place with the far end.

    If a port does not support negotiation, the value of on(1)
    is not allowed. If the port's cpvlanTrunkPortEncapType is
    set to negotiate(3), onNoNegotiate(2) is not allowed.

    Parsed from file CISCO-PRIVATE-VLAN-MIB.my.txt
    Company: None
    Module: CISCO-PRIVATE-VLAN-MIB

    Description by cisco

    For private VLAN trunk ports, this object allows the
    operator to mandate the trunking behavior of the port

    on(1) dictates that the private VLAN port will always be a
    trunk. If the negotiation is supported on this port,
    negotiation will take place with the far end to attempt to
    bring the far end into trunking state.

    onNoNegotiate(2) is used to indicate that the interface is
    permanently set to be a trunk, and no negotiation takes
    place with the far end on the link to ensure consistent
    operation. This is similar to on(1) except no negotiation
    takes place with the far end.

    If a port does not support negotiation, the value of on(1)
    is not allowed. If the port's cpvlanTrunkPortEncapType is
    set to negotiate(3), onNoNegotiate(2) is not allowed.

    Information by circitor

    cpvlanTrunkPortDynamicState OBJECT-TYPE
    SYNTAX     INTEGER { on(1), onNoNegotiate(2) }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "For private VLAN trunk ports, this object allows the
            operator to mandate the trunking behavior of the port

            on(1) dictates that the private VLAN port will always be a
            trunk. If the negotiation is supported on this port, 
            negotiation will take place with the far end to attempt to
            bring the far end into trunking state.

            onNoNegotiate(2) is used to indicate that the interface is
            permanently set to be a trunk, and no negotiation takes
            place with the far end on the link to ensure consistent
            operation. This is similar to on(1) except no negotiation
            takes place with the far end.

            If a port does not support negotiation, the value of on(1)
            is not allowed. If the port's cpvlanTrunkPortEncapType is 
            set to negotiate(3), onNoNegotiate(2) is not allowed."

       ::= { cpvlanTrunkPortEntry 1 }

    Information by cisco_v1

    cpvlanTrunkPortDynamicState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        onNoNegotiate(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "For private VLAN trunk ports, this object allows the
        operator to mandate the trunking behavior of the port
        
        on(1) dictates that the private VLAN port will always be a
        trunk. If the negotiation is supported on this port, 
        negotiation will take place with the far end to attempt to
        bring the far end into trunking state.
        
        onNoNegotiate(2) is used to indicate that the interface is
        permanently set to be a trunk, and no negotiation takes
        place with the far end on the link to ensure consistent
        operation. This is similar to on(1) except no negotiation
        takes place with the far end.
        
        If a port does not support negotiation, the value of on(1)
        is not allowed. If the port's cpvlanTrunkPortEncapType is 
        set to negotiate(3), onNoNegotiate(2) is not allowed."
    ::= { cpvlanTrunkPortEntry 1 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-PRIVATE-VLAN-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    cpvlanTrunkPortDynamicState OBJECT-TYPE
    SYNTAX     INTEGER { on(1), onNoNegotiate(2) }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "For private VLAN trunk ports, this object allows the
            operator to mandate the trunking behavior of the port

            on(1) dictates that the private VLAN port will always be a
            trunk. If the negotiation is supported on this port, 
            negotiation will take place with the far end to attempt to
            bring the far end into trunking state.

            onNoNegotiate(2) is used to indicate that the interface is
            permanently set to be a trunk, and no negotiation takes
            place with the far end on the link to ensure consistent
            operation. This is similar to on(1) except no negotiation
            takes place with the far end.

            If a port does not support negotiation, the value of on(1)
            is not allowed. If the port's cpvlanTrunkPortEncapType is 
            set to negotiate(3), onNoNegotiate(2) is not allowed."

       ::= { cpvlanTrunkPortEntry 1 }

    Information by cisco

    cpvlanTrunkPortDynamicState OBJECT-TYPE
    SYNTAX     INTEGER { on(1), onNoNegotiate(2) }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "For private VLAN trunk ports, this object allows the
            operator to mandate the trunking behavior of the port

            on(1) dictates that the private VLAN port will always be a
            trunk. If the negotiation is supported on this port, 
            negotiation will take place with the far end to attempt to
            bring the far end into trunking state.

            onNoNegotiate(2) is used to indicate that the interface is
            permanently set to be a trunk, and no negotiation takes
            place with the far end on the link to ensure consistent
            operation. This is similar to on(1) except no negotiation
            takes place with the far end.

            If a port does not support negotiation, the value of on(1)
            is not allowed. If the port's cpvlanTrunkPortEncapType is 
            set to negotiate(3), onNoNegotiate(2) is not allowed."

       ::= { cpvlanTrunkPortEntry 1 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (12)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.173.1.2.4.1.2 cpvlanTrunkPortEncapType 0 0 The type of VLAN encapsulation desired to be used on this
    private vlan trunk port.

    It is either a particular type, or 'negotiate'…
    1.3.6.1.4.1.9.9.173.1.2.4.1.3 cpvlanTrunkPortNativeVlan 0 0 The VlanIndex of the VLAN which is represented by native
    frames on this private vlan trunk port. For private vlan
    trunk ports tha…
    1.3.6.1.4.1.9.9.173.1.2.4.1.4 cpvlanTrunkPortSecondaryVlans 0 0 A string of octets containing one bit per VLAN for VLANs
    with values of 0 through 1023 in the management domain
    on this port.

    If t…
    1.3.6.1.4.1.9.9.173.1.2.4.1.5 cpvlanTrunkPortSecondaryVlans2k 0 0 A string of octets containing one bit per VLAN for VLANs
    with values of 1024 through 2047 in the management domain
    on this port.

    I…
    1.3.6.1.4.1.9.9.173.1.2.4.1.6 cpvlanTrunkPortSecondaryVlans3k 0 0 A string of octets containing one bit per VLAN for VLANs
    with values of 2048 through 3071 in the management domain
    on this port.

    I…
    1.3.6.1.4.1.9.9.173.1.2.4.1.7 cpvlanTrunkPortSecondaryVlans4k 0 0 A string of octets containing one bit per VLAN for VLANs
    with values of 3072 through 4095 in the management domain
    on this port.

    I…
    1.3.6.1.4.1.9.9.173.1.2.4.1.8 cpvlanTrunkPortNormalVlans 0 0 A string of octets containing one bit per VLAN for VLANs
    with values of 0 through 1023 in the management domain
    on this port.

    If t…
    1.3.6.1.4.1.9.9.173.1.2.4.1.9 cpvlanTrunkPortNormalVlans2k 0 0 A string of octets containing one bit per VLAN for VLANs
    with values of 1024 through 2047 in the management domain
    on this port.

    I…
    1.3.6.1.4.1.9.9.173.1.2.4.1.10 cpvlanTrunkPortNormalVlans3k 0 0 A string of octets containing one bit per VLAN for VLANs
    with values of 2048 through 3071 in the management domain
    on this port.

    I…
    1.3.6.1.4.1.9.9.173.1.2.4.1.11 cpvlanTrunkPortNormalVlans4k 0 0 A string of octets containing one bit per VLAN for VLANs
    with values of 3072 through 4095 in the management domain
    on this port.

    I…
    1.3.6.1.4.1.9.9.173.1.2.4.1.12 cpvlanTrunkPortDynamicStatus 0 0 Indicates the current dynamic trunking status of the
    specified private VLAN port.

    trunking(1) indicates that the private VLAN por…
    1.3.6.1.4.1.9.9.173.1.2.4.1.13 cpvlanTrunkPortEncapOperType 0 0 The type of VLAN encapsulation in use on this private
    vlan trunk port.

    dot1Q(1) indicates that the port accepts and transmits
    pac…