saaApmControlScriptCfgURL is the only required object for
this row to become 'active'.
APM operations are created in one of two ways:
1) By setting this object to 'createAndGo' and supplying
a values for saaApmControlScriptCfgURL as part of the
same set operation.
2) By setting this object to 'createAndWait' and then
supplying a value for saaApmControlScriptCfgURL via
a different set operation.
In the 'createAndGo' case, the row will transition to
'active' and the APM operation will start. In the
'createAndWait' case, a subsequent set operation will be
required to transition the row to 'active' and start the
APM operation.
The APM operation cannot start until saaApmScriptCfgURL is
set. Until the required object is set, the row will be
'notReady'.
The APM operation can be started by setting this object to
'active'.
The APM operation can be stopped by setting this object to
'notInService'.
The APM operation can be deleted by setting this object to
'destroy'.
saaApmCtrlStatus transitions from 'active' to
'notInService' if the saaApmOperLastStatus is changed to
any error other than 'noError' and 'socketErr'.
Parsed from file CISCO-SAA-APM-MIB.mib
Module: CISCO-SAA-APM-MIB
saaApmControlScriptCfgURL is the only required object for
this row to become 'active'.
APM operations are created in one of two ways:
1) By setting this object to 'createAndGo' and supplying
a values for saaApmControlScriptCfgURL as part of the
same set operation.
2) By setting this object to 'createAndWait' and then
supplying a value for saaApmControlScriptCfgURL via
a different set operation.
In the 'createAndGo' case, the row will transition to
'active' and the APM operation will start. In the
'createAndWait' case, a subsequent set operation will be
required to transition the row to 'active' and start the
APM operation.
The APM operation cannot start until saaApmScriptCfgURL is
set. Until the required object is set, the row will be
'notReady'.
The APM operation can be started by setting this object to
'active'.
The APM operation can be stopped by setting this object to
'notInService'.
The APM operation can be deleted by setting this object to
'destroy'.
saaApmCtrlStatus transitions from 'active' to
'notInService' if the saaApmOperLastStatus is changed to
any error other than 'noError' and 'socketErr'.
saaApmControlScriptCfgURL is the only required object for
this row to become 'active'.
APM operations are created in one of two ways:
1) By setting this object to 'createAndGo' and supplying
a values for saaApmControlScriptCfgURL as part of the
same set operation.
2) By setting this object to 'createAndWait' and then
supplying a value for saaApmControlScriptCfgURL via
a different set operation.
In the 'createAndGo' case, the row will transition to
'active' and the APM operation will start. In the
'createAndWait' case, a subsequent set operation will be
required to transition the row to 'active' and start the
APM operation.
The APM operation cannot start until saaApmScriptCfgURL is
set. Until the required object is set, the row will be
'notReady'.
The APM operation can be started by setting this object to
'active'.
The APM operation can be stopped by setting this object to
'notInService'.
The APM operation can be deleted by setting this object to
'destroy'.
saaApmCtrlStatus transitions from 'active' to
'notInService' if the saaApmOperLastStatus is changed to
any error other than 'noError' and 'socketErr'.
Parsed from file CISCO-SAA-APM-MIB.my.txt
Company: None
Module: CISCO-SAA-APM-MIB
saaApmControlScriptCfgURL is the only required object for
this row to become 'active'.
APM operations are created in one of two ways:
1) By setting this object to 'createAndGo' and supplying
a values for saaApmControlScriptCfgURL as part of the
same set operation.
2) By setting this object to 'createAndWait' and then
supplying a value for saaApmControlScriptCfgURL via
a different set operation.
In the 'createAndGo' case, the row will transition to
'active' and the APM operation will start. In the
'createAndWait' case, a subsequent set operation will be
required to transition the row to 'active' and start the
APM operation.
The APM operation cannot start until saaApmScriptCfgURL is
set. Until the required object is set, the row will be
'notReady'.
The APM operation can be started by setting this object to
'active'.
The APM operation can be stopped by setting this object to
'notInService'.
The APM operation can be deleted by setting this object to
'destroy'.
saaApmCtrlStatus transitions from 'active' to
'notInService' if the saaApmOperLastStatus is changed to
any error other than 'noError' and 'socketErr'.
saaApmCtrlStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "saaApmControlScriptCfgURL is the only required object for this row to become 'active'. APM operations are created in one of two ways: 1) By setting this object to 'createAndGo' and supplying a values for saaApmControlScriptCfgURL as part of the same set operation. 2) By setting this object to 'createAndWait' and then supplying a value for saaApmControlScriptCfgURL via a different set operation. In the 'createAndGo' case, the row will transition to 'active' and the APM operation will start. In the 'createAndWait' case, a subsequent set operation will be required to transition the row to 'active' and start the APM operation. The APM operation cannot start until saaApmScriptCfgURL is set. Until the required object is set, the row will be 'notReady'. The APM operation can be started by setting this object to 'active'. The APM operation can be stopped by setting this object to 'notInService'. The APM operation can be deleted by setting this object to 'destroy'. saaApmCtrlStatus transitions from 'active' to 'notInService' if the saaApmOperLastStatus is changed to any error other than 'noError' and 'socketErr'." ::= { saaApmCtrlEntry 7 }
saaApmCtrlStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "saaApmControlScriptCfgURL is the only required object for this row to become 'active'. APM operations are created in one of two ways: 1) By setting this object to 'createAndGo' and supplying a values for saaApmControlScriptCfgURL as part of the same set operation. 2) By setting this object to 'createAndWait' and then supplying a value for saaApmControlScriptCfgURL via a different set operation. In the 'createAndGo' case, the row will transition to 'active' and the APM operation will start. In the 'createAndWait' case, a subsequent set operation will be required to transition the row to 'active' and start the APM operation. The APM operation cannot start until saaApmScriptCfgURL is set. Until the required object is set, the row will be 'notReady'. The APM operation can be started by setting this object to 'active'. The APM operation can be stopped by setting this object to 'notInService'. The APM operation can be deleted by setting this object to 'destroy'. saaApmCtrlStatus transitions from 'active' to 'notInService' if the saaApmOperLastStatus is changed to any error other than 'noError' and 'socketErr'." ::= { saaApmCtrlEntry 7 }
Vendor: Cisco
Module: CISCO-SAA-APM-MIB
[Automatically extracted from oidview.com]
saaApmCtrlStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "saaApmControlScriptCfgURL is the only required object for this row to become 'active'. APM operations are created in one of two ways: 1) By setting this object to 'createAndGo' and supplying a values for saaApmControlScriptCfgURL as part of the same set operation. 2) By setting this object to 'createAndWait' and then supplying a value for saaApmControlScriptCfgURL via a different set operation. In the 'createAndGo' case, the row will transition to 'active' and the APM operation will start. In the 'createAndWait' case, a subsequent set operation will be required to transition the row to 'active' and start the APM operation. The APM operation cannot start until saaApmScriptCfgURL is set. Until the required object is set, the row will be 'notReady'. The APM operation can be started by setting this object to 'active'. The APM operation can be stopped by setting this object to 'notInService'. The APM operation can be deleted by setting this object to 'destroy'. saaApmCtrlStatus transitions from 'active' to 'notInService' if the saaApmOperLastStatus is changed to any error other than 'noError' and 'socketErr'." ::= { saaApmCtrlEntry 7 }
saaApmCtrlStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "saaApmControlScriptCfgURL is the only required object for this row to become 'active'. APM operations are created in one of two ways: 1) By setting this object to 'createAndGo' and supplying a values for saaApmControlScriptCfgURL as part of the same set operation. 2) By setting this object to 'createAndWait' and then supplying a value for saaApmControlScriptCfgURL via a different set operation. In the 'createAndGo' case, the row will transition to 'active' and the APM operation will start. In the 'createAndWait' case, a subsequent set operation will be required to transition the row to 'active' and start the APM operation. The APM operation cannot start until saaApmScriptCfgURL is set. Until the required object is set, the row will be 'notReady'. The APM operation can be started by setting this object to 'active'. The APM operation can be stopped by setting this object to 'notInService'. The APM operation can be deleted by setting this object to 'destroy'. saaApmCtrlStatus transitions from 'active' to 'notInService' if the saaApmOperLastStatus is changed to any error other than 'noError' and 'socketErr'." ::= { saaApmCtrlEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.177.1.2.1.1.1 | saaApmCtrlIndex | 0 | 0 | This object uniquely identifies a row int the saaApmCtrlTable. This is a pseudo-random number selected by the management station … |
| 1.3.6.1.4.1.9.9.177.1.2.1.1.2 | saaApmCtrlScriptCfgURL | 0 | 0 | This URL defines the location of the config file required to measure the performance of the application. It also defines which pr… |
| 1.3.6.1.4.1.9.9.177.1.2.1.1.3 | saaApmCtrlOwner | 0 | 0 | Identifies the entity that created this table row. |
| 1.3.6.1.4.1.9.9.177.1.2.1.1.4 | saaApmCtrlInitDataTrans | 0 | 0 | This object is set to TRUE to initiate result transfer. Results are transferred to a server specified in the control file. It is … |
| 1.3.6.1.4.1.9.9.177.1.2.1.1.5 | saaApmCtrlDataTransTime | 0 | 0 | This object indicates the time of the last result transfer attempt. |
| 1.3.6.1.4.1.9.9.177.1.2.1.1.6 | saaApmCtrlDataTransStatus | 0 | 0 | This object indicates the status of the result transfer. |
| 1.3.6.1.4.1.9.9.177.1.2.1.1.8 | saaApmCtrlNvgen | 0 | 0 | This object is to allow or disallow the operation control info from being written to running-config. It cannot be set once the op… |