Indicates whether for ARP packets MAC address matching of
ethernet header and the source MAC address specified in ARP
header is enabled. It also indicates the action taken when
the addresses do not match.
If this object value is disable(1), the device will not check
for matching of source MAC address in ethernet header with the
sender MAC address in ARP header for ARP packets.
If this object value is enable(2), the device will check
for matching of source MAC address in ethernet header with the
sender MAC address in ARP header for ARP packets. A syslog
message is generated if the MAC addresses check fails.
If this object value is drop(3), the device will check for
MAC addresses matching and ARP packets whose MAC addresses
do not match will be dropped.
If this object value is dropAndLog(4), the device will check
for MAC addresses matching and ARP packets whose MAC addresses
do not match will be dropped and logged into
caqIpFlowLoggingTable.
Parsed from file CISCO-CATOS-ACL-QOS-MIB.mib
Module: CISCO-CATOS-ACL-QOS-MIB
Indicates whether for ARP packets MAC address matching of
ethernet header and the source MAC address specified in ARP
header is enabled. It also indicates the action taken when
the addresses do not match.
If this object value is disable(1), the device will not check
for matching of source MAC address in ethernet header with the
sender MAC address in ARP header for ARP packets.
If this object value is enable(2), the device will check
for matching of source MAC address in ethernet header with the
sender MAC address in ARP header for ARP packets. A syslog
message is generated if the MAC addresses check fails.
If this object value is drop(3), the device will check for
MAC addresses matching and ARP packets whose MAC addresses
do not match will be dropped.
If this object value is dropAndLog(4), the device will check
for MAC addresses matching and ARP packets whose MAC addresses
do not match will be dropped and logged into
caqIpFlowLoggingTable.
Indicates whether for ARP packets MAC address matching of
ethernet header and the source MAC address specified in ARP
header is enabled. It also indicates the action taken when
the addresses do not match.
If this object value is disable(1), the device will not check
for matching of source MAC address in ethernet header with the
sender MAC address in ARP header for ARP packets.
If this object value is enable(2), the device will check
for matching of source MAC address in ethernet header with the
sender MAC address in ARP header for ARP packets. A syslog
message is generated if the MAC addresses check fails.
If this object value is drop(3), the device will check for
MAC addresses matching and ARP packets whose MAC addresses
do not match will be dropped.
If this object value is dropAndLog(4), the device will check
for MAC addresses matching and ARP packets whose MAC addresses
do not match will be dropped and logged into
caqIpFlowLoggingTable.
Parsed from file CISCO-CATOS-ACL-QOS-MIB.my.txt
Company: None
Module: CISCO-CATOS-ACL-QOS-MIB
Indicates whether for ARP packets MAC address matching of
ethernet header and the source MAC address specified in ARP
header is enabled. It also indicates the action taken when
the addresses do not match.
If this object value is disable(1), the device will not check
for matching of source MAC address in ethernet header with the
sender MAC address in ARP header for ARP packets.
If this object value is enable(2), the device will check
for matching of source MAC address in ethernet header with the
sender MAC address in ARP header for ARP packets. A syslog
message is generated if the MAC addresses check fails.
If this object value is drop(3), the device will check for
MAC addresses matching and ARP packets whose MAC addresses
do not match will be dropped.
If this object value is dropAndLog(4), the device will check
for MAC addresses matching and ARP packets whose MAC addresses
do not match will be dropped and logged into
caqIpFlowLoggingTable.
caqAclArpInspMatchMac OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), drop(3), dropAndLog(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether for ARP packets MAC address matching of ethernet header and the source MAC address specified in ARP header is enabled. It also indicates the action taken when the addresses do not match. If this object value is disable(1), the device will not check for matching of source MAC address in ethernet header with the sender MAC address in ARP header for ARP packets. If this object value is enable(2), the device will check for matching of source MAC address in ethernet header with the sender MAC address in ARP header for ARP packets. A syslog message is generated if the MAC addresses check fails. If this object value is drop(3), the device will check for MAC addresses matching and ARP packets whose MAC addresses do not match will be dropped. If this object value is dropAndLog(4), the device will check for MAC addresses matching and ARP packets whose MAC addresses do not match will be dropped and logged into caqIpFlowLoggingTable." ::= { caqArpInspObjects 2 }
caqAclArpInspMatchMac OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), drop(3), dropAndLog(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether for ARP packets MAC address matching of ethernet header and the source MAC address specified in ARP header is enabled. It also indicates the action taken when the addresses do not match. If this object value is disable(1), the device will not check for matching of source MAC address in ethernet header with the sender MAC address in ARP header for ARP packets. If this object value is enable(2), the device will check for matching of source MAC address in ethernet header with the sender MAC address in ARP header for ARP packets. A syslog message is generated if the MAC addresses check fails. If this object value is drop(3), the device will check for MAC addresses matching and ARP packets whose MAC addresses do not match will be dropped. If this object value is dropAndLog(4), the device will check for MAC addresses matching and ARP packets whose MAC addresses do not match will be dropped and logged into caqIpFlowLoggingTable." ::= { caqArpInspObjects 2 }
Vendor: Cisco
Module: CISCO-CATOS-ACL-QOS-MIB
[Automatically extracted from oidview.com]
caqAclArpInspMatchMac OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), drop(3), dropAndLog(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether for ARP packets MAC address matching of ethernet header and the source MAC address specified in ARP header is enabled. It also indicates the action taken when the addresses do not match. If this object value is disable(1), the device will not check for matching of source MAC address in ethernet header with the sender MAC address in ARP header for ARP packets. If this object value is enable(2), the device will check for matching of source MAC address in ethernet header with the sender MAC address in ARP header for ARP packets. A syslog message is generated if the MAC addresses check fails. If this object value is drop(3), the device will check for MAC addresses matching and ARP packets whose MAC addresses do not match will be dropped. If this object value is dropAndLog(4), the device will check for MAC addresses matching and ARP packets whose MAC addresses do not match will be dropped and logged into caqIpFlowLoggingTable." ::= { caqArpInspObjects 2 }
caqAclArpInspMatchMac OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), drop(3), dropAndLog(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether for ARP packets MAC address matching of ethernet header and the source MAC address specified in ARP header is enabled. It also indicates the action taken when the addresses do not match. If this object value is disable(1), the device will not check for matching of source MAC address in ethernet header with the sender MAC address in ARP header for ARP packets. If this object value is enable(2), the device will check for matching of source MAC address in ethernet header with the sender MAC address in ARP header for ARP packets. A syslog message is generated if the MAC addresses check fails. If this object value is drop(3), the device will check for MAC addresses matching and ARP packets whose MAC addresses do not match will be dropped. If this object value is dropAndLog(4), the device will check for MAC addresses matching and ARP packets whose MAC addresses do not match will be dropped and logged into caqIpFlowLoggingTable." ::= { caqArpInspObjects 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.179.1.8.2.0 | caqAclArpInspMatchMac | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.179.1.8.3 | caqAclArpInspAddrValidation | 1 | 1 | Indicates whether for ARP packets checking for valid source MAC and source IP address specified in ARP header is enabled. It also… |
| 1.3.6.1.4.1.9.9.179.1.8.4 | caqArpInspGlobalForwardedPkts | 1 | 1 | Indicates the total number of packets subjected to ARP Inspection is forwarded. |
| 1.3.6.1.4.1.9.9.179.1.8.5 | caqArpInspGlobalDroppedPkts | 1 | 1 | Indicates the total number of packets subjected to ARP Inspection is dropped. |
| 1.3.6.1.4.1.9.9.179.1.8.6 | caqRARPForwardedPkts | 1 | 1 | Indicates the total number of packets subjected to Reverse ARP (RARP) Inspection is forwarded. |
| 1.3.6.1.4.1.9.9.179.1.8.7 | caqMatchedMacFailedPkts | 1 | 1 | Indicates the total number of packets subjected to ARP Inspection whose MAC address specified in the ethernet header and the sour… |
| 1.3.6.1.4.1.9.9.179.1.8.8 | caqAddrValidationFailedPkts | 1 | 1 | Indicates the total number of ARP packets that have invalid source MAC address or invalid source IP address specified in the ARP … |
| 1.3.6.1.4.1.9.9.179.1.8.9 | caqArpInspIpDroppedPkts | 1 | 1 | Indicates the total number of IP packets dropped by ARP Inspection because of invalid IP address. |
| 1.3.6.1.4.1.9.9.179.1.8.10 | caqArpInspStatsTable | 1 | 4 | A table containing ARP Inspection statistics counter per ACL. |
| 1.3.6.1.4.1.9.9.179.1.8.11 | caqIfArpInspConfigTable | 1 | 3 | This table contains the configuration of several threshold values related to ARP Inspection at each physical interface. |