Reference record for OID 1.3.6.1.4.1.9.9.180.1.1.1



parent
1.3.6.1.4.1.9.9.180.1.1 (p2mpHistCtrlTable)
node code
1
node name
p2mpHistCtrlEntry
dot oid
1.3.6.1.4.1.9.9.180.1.1.1
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoWirelessRfMetricsMIB(180) p2mpRadioHistoryGroup(1) p2mpHistCtrlTable(1) p2mpHistCtrlEntry(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoWirelessRfMetricsMIB(180) p2mpRadioHistoryGroup(1) p2mpHistCtrlTable(1) p2mpHistCtrlEntry(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoWirelessRfMetricsMIB(180) p2mpRadioHistoryGroup(1) p2mpHistCtrlTable(1) p2mpHistCtrlEntry(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoWirelessRfMetricsMIB(180) p2mpRadioHistoryGroup(1) p2mpHistCtrlTable(1) p2mpHistCtrlEntry(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoWirelessRfMetricsMIB(180) p2mpRadioHistoryGroup(1) p2mpHistCtrlTable(1) p2mpHistCtrlEntry(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoWirelessRfMetricsMIB(180) p2mpRadioHistoryGroup(1) p2mpHistCtrlTable(1) p2mpHistCtrlEntry(1)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoWirelessRfMetricsMIB/p2mpRadioHistoryGroup/p2mpHistCtrlTable/p2mpHistCtrlEntry
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoWirelessRfMetricsMIB/p2mpRadioHistoryGroup/p2mpHistCtrlTable/p2mpHistCtrlEntry
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoWirelessRfMetricsMIB/p2mpRadioHistoryGroup/p2mpHistCtrlTable/p2mpHistCtrlEntry
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoWirelessRfMetricsMIB/p2mpRadioHistoryGroup/p2mpHistCtrlTable/p2mpHistCtrlEntry
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoWirelessRfMetricsMIB/p2mpRadioHistoryGroup/p2mpHistCtrlTable/p2mpHistCtrlEntry
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoWirelessRfMetricsMIB/p2mpRadioHistoryGroup/p2mpHistCtrlTable/p2mpHistCtrlEntry
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/180/1/1/1

    Description by circitor

    This represents one entry in the p2mpHistCtrlTable. This table
    is indexed by ifIndex, p2mpHistSuMacAddress, and p2mpHistClass.

    At the head end:
    Histograms can be created on each upstream channel either on a
    per channel or per subscriber unit basis.

    When histograms are created on a per subscriber unit basis, the
    user must specify the subscriber unit's MAC address and the
    ifIndex of the MAC layer (propDocsWirelessMaclayer) at the
    head end.

    When histograms are created on a per channel basis, the user
    must set the MAC address to zero(00 00 00 00 00 00). The
    channel ID is specified by the ifIndex of the upstream channel.
    Hence, when creating histograms on a per channel basis, the
    ifIndex must be set to the ifIndex of the upstream channel
    (propDocsWirelessUpstream) on which the histogram is to be
    created.

    At the subscriber end:
    Histograms can only be created on the downstream channel. Since
    there is only one downstream channel, histograms cannot be
    created per channel ID. Hence, when a histogram is created, the
    user must set the MAC address (p2mpHistSuMacAdress) to
    zero(00 00 00 00 00 00). The ifIndex must be set to the ifIndex
    of the downstream channel (propDocsWirelessDownstream).

    Parsed from file CISCO-WIRELESS-P2MP-RF-METRICS-MIB.mib
    Module: CISCO-WIRELESS-P2MP-RF-METRICS-MIB

    Description by cisco_v1

    This represents one entry in the p2mpHistCtrlTable. This table
    is indexed by ifIndex, p2mpHistSuMacAddress, and p2mpHistClass.

    At the head end:
    Histograms can be created on each upstream channel either on a
    per channel or per subscriber unit basis.

    When histograms are created on a per subscriber unit basis, the
    user must specify the subscriber unit's MAC address and the
    ifIndex of the MAC layer (propDocsWirelessMaclayer) at the
    head end.

    When histograms are created on a per channel basis, the user
    must set the MAC address to zero(00 00 00 00 00 00). The
    channel ID is specified by the ifIndex of the upstream channel.
    Hence, when creating histograms on a per channel basis, the
    ifIndex must be set to the ifIndex of the upstream channel
    (propDocsWirelessUpstream) on which the histogram is to be
    created.

    At the subscriber end:
    Histograms can only be created on the downstream channel. Since
    there is only one downstream channel, histograms cannot be
    created per channel ID. Hence, when a histogram is created, the
    user must set the MAC address (p2mpHistSuMacAdress) to
    zero(00 00 00 00 00 00). The ifIndex must be set to the ifIndex
    of the downstream channel (propDocsWirelessDownstream).

    Description by oid_info

    p2mpHistCtrlEntry OBJECT-TYPE
    SYNTAX P2mpHistCtrlEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
    "This represents one entry in the p2mpHistCtrlTable. This table
    is indexed by ifIndex, p2mpHistSuMacAddress, and p2mpHistClass.

    At the head end:
    Histograms can be created on each upstream channel either on a
    per channel or per subscriber unit basis.

    When histograms are created on a per subscriber unit basis, the
    user must specify the subscriber units MAC address and the
    ifIndex of the MAC layer (propDocsWirelessMaclayer) at the
    head end.

    When histograms are created on a per channel basis, the user
    must set the MAC address to zero(00 00 00 00 00 00). The
    channel ID is specified by the ifIndex of the upstream channel.
    Hence, when creating histograms on a per channel basis, the
    ifIndex must be set to the ifIndex of the upstream channel
    (propDocsWirelessUpstream) on which the histogram is to be
    created.

    At the subscriber end:
    Histograms can only be created on the downstream channel. Since
    there is only one downstream channel, histograms cannot be
    created per channel ID. Hence, when a histogram is created, the
    user must set the MAC address (p2mpHistSuMacAdress) to
    zero(00 00 00 00 00 00). The ifIndex must be set to the ifIndex
    of the downstream channel (propDocsWirelessDownstream)."
    INDEX { ifIndex, p2mpHistSuMacAddress, p2mpHistClass }
    View at oid-info.com

    Description by mibdepot

    This represents one entry in the p2mpHistCtrlTable. This table
    is indexed by ifIndex, p2mpHistSuMacAddress, and p2mpHistClass.

    At the head end:
    Histograms can be created on each upstream channel either on a
    per channel or per subscriber unit basis.

    When histograms are created on a per subscriber unit basis, the
    user must specify the subscriber unit's MAC address and the
    ifIndex of the MAC layer (propDocsWirelessMaclayer) at the
    head end.

    When histograms are created on a per channel basis, the user
    must set the MAC address to zero(00 00 00 00 00 00). The
    channel ID is specified by the ifIndex of the upstream channel.
    Hence, when creating histograms on a per channel basis, the
    ifIndex must be set to the ifIndex of the upstream channel
    (propDocsWirelessUpstream) on which the histogram is to be
    created.

    At the subscriber end:
    Histograms can only be created on the downstream channel. Since
    there is only one downstream channel, histograms cannot be
    created per channel ID. Hence, when a histogram is created, the
    user must set the MAC address (p2mpHistSuMacAdress) to
    zero(00 00 00 00 00 00). The ifIndex must be set to the ifIndex
    of the downstream channel (propDocsWirelessDownstream).

    Parsed from file CISCO-WIRELESS-P2MP-RF-METRICS-MIB.my.txt
    Company: None
    Module: CISCO-WIRELESS-P2MP-RF-METRICS-MIB

    Description by cisco

    This represents one entry in the p2mpHistCtrlTable. This table
    is indexed by ifIndex, p2mpHistSuMacAddress, and p2mpHistClass.

    At the head end:
    Histograms can be created on each upstream channel either on a
    per channel or per subscriber unit basis.

    When histograms are created on a per subscriber unit basis, the
    user must specify the subscriber unit's MAC address and the
    ifIndex of the MAC layer (propDocsWirelessMaclayer) at the
    head end.

    When histograms are created on a per channel basis, the user
    must set the MAC address to zero(00 00 00 00 00 00). The
    channel ID is specified by the ifIndex of the upstream channel.
    Hence, when creating histograms on a per channel basis, the
    ifIndex must be set to the ifIndex of the upstream channel
    (propDocsWirelessUpstream) on which the histogram is to be
    created.

    At the subscriber end:
    Histograms can only be created on the downstream channel. Since
    there is only one downstream channel, histograms cannot be
    created per channel ID. Hence, when a histogram is created, the
    user must set the MAC address (p2mpHistSuMacAdress) to
    zero(00 00 00 00 00 00). The ifIndex must be set to the ifIndex
    of the downstream channel (propDocsWirelessDownstream).

    Information by circitor

    p2mpHistCtrlEntry OBJECT-TYPE
        SYNTAX P2mpHistCtrlEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "This represents one entry in the p2mpHistCtrlTable.  This table
        is indexed by ifIndex, p2mpHistSuMacAddress, and p2mpHistClass.
 
        At the head end:
        Histograms can be created on each upstream channel either on a 
        per channel or per subscriber unit basis.
        
        When histograms are created on a per subscriber unit basis, the 
        user must specify the subscriber unit's MAC address and the 
        ifIndex of the MAC layer (propDocsWirelessMaclayer) at the 
        head end.

        When histograms are created on a per channel basis, the user
        must set the MAC address to zero(00 00 00 00 00 00).  The 
        channel ID is specified by the ifIndex of the upstream channel.
        Hence, when creating histograms on a per channel basis, the 
        ifIndex must be set to the ifIndex of the upstream channel 
        (propDocsWirelessUpstream) on which the histogram is to be 
        created.

        At the subscriber end:
        Histograms can only be created on the downstream channel.  Since
        there is only one downstream channel, histograms cannot be 
        created per channel ID.  Hence, when a histogram is created, the
        user must set the MAC address (p2mpHistSuMacAdress) to 
        zero(00 00 00 00 00 00).  The ifIndex must be set to the ifIndex
        of the downstream channel (propDocsWirelessDownstream)."

        INDEX { ifIndex, p2mpHistSuMacAddress, p2mpHistClass }
        ::= { p2mpHistCtrlTable 1 }

    Information by cisco_v1

    p2mpHistCtrlEntry OBJECT-TYPE
    SYNTAX P2mpHistCtrlEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This represents one entry in the p2mpHistCtrlTable.  This table
        is indexed by ifIndex, p2mpHistSuMacAddress, and p2mpHistClass.
        
        At the head end:
        Histograms can be created on each upstream channel either on a 
        per channel or per subscriber unit basis.
        
        When histograms are created on a per subscriber unit basis, the 
        user must specify the subscriber unit's MAC address and the 
        ifIndex of the MAC layer (propDocsWirelessMaclayer) at the 
        head end.
        
        When histograms are created on a per channel basis, the user
        must set the MAC address to zero(00 00 00 00 00 00).  The 
        channel ID is specified by the ifIndex of the upstream channel.
        Hence, when creating histograms on a per channel basis, the 
        ifIndex must be set to the ifIndex of the upstream channel 
        (propDocsWirelessUpstream) on which the histogram is to be 
        created.
        
        At the subscriber end:
        Histograms can only be created on the downstream channel.  Since
        there is only one downstream channel, histograms cannot be 
        created per channel ID.  Hence, when a histogram is created, the
        user must set the MAC address (p2mpHistSuMacAdress) to 
        zero(00 00 00 00 00 00).  The ifIndex must be set to the ifIndex
        of the downstream channel (propDocsWirelessDownstream)."
    INDEX { ifIndex, p2mpHistSuMacAddress, p2mpHistClass }
    ::= { p2mpHistCtrlTable 1 }

    Information by oid_info

    Automatically extracted from Cisco SNMP v1 MIBs

    Information by mibdepot

    p2mpHistCtrlEntry OBJECT-TYPE
        SYNTAX P2mpHistCtrlEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "This represents one entry in the p2mpHistCtrlTable.  This table
        is indexed by ifIndex, p2mpHistSuMacAddress, and p2mpHistClass.
 
        At the head end:
        Histograms can be created on each upstream channel either on a 
        per channel or per subscriber unit basis.
        
        When histograms are created on a per subscriber unit basis, the 
        user must specify the subscriber unit's MAC address and the 
        ifIndex of the MAC layer (propDocsWirelessMaclayer) at the 
        head end.

        When histograms are created on a per channel basis, the user
        must set the MAC address to zero(00 00 00 00 00 00).  The 
        channel ID is specified by the ifIndex of the upstream channel.
        Hence, when creating histograms on a per channel basis, the 
        ifIndex must be set to the ifIndex of the upstream channel 
        (propDocsWirelessUpstream) on which the histogram is to be 
        created.

        At the subscriber end:
        Histograms can only be created on the downstream channel.  Since
        there is only one downstream channel, histograms cannot be 
        created per channel ID.  Hence, when a histogram is created, the
        user must set the MAC address (p2mpHistSuMacAdress) to 
        zero(00 00 00 00 00 00).  The ifIndex must be set to the ifIndex
        of the downstream channel (propDocsWirelessDownstream)."

        INDEX { ifIndex, p2mpHistSuMacAddress, p2mpHistClass }
        ::= { p2mpHistCtrlTable 1 }

    Information by cisco

    p2mpHistCtrlEntry OBJECT-TYPE
        SYNTAX P2mpHistCtrlEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "This represents one entry in the p2mpHistCtrlTable.  This table
        is indexed by ifIndex, p2mpHistSuMacAddress, and p2mpHistClass.
 
        At the head end:
        Histograms can be created on each upstream channel either on a 
        per channel or per subscriber unit basis.
        
        When histograms are created on a per subscriber unit basis, the 
        user must specify the subscriber unit's MAC address and the 
        ifIndex of the MAC layer (propDocsWirelessMaclayer) at the 
        head end.

        When histograms are created on a per channel basis, the user
        must set the MAC address to zero(00 00 00 00 00 00).  The 
        channel ID is specified by the ifIndex of the upstream channel.
        Hence, when creating histograms on a per channel basis, the 
        ifIndex must be set to the ifIndex of the upstream channel 
        (propDocsWirelessUpstream) on which the histogram is to be 
        created.

        At the subscriber end:
        Histograms can only be created on the downstream channel.  Since
        there is only one downstream channel, histograms cannot be 
        created per channel ID.  Hence, when a histogram is created, the
        user must set the MAC address (p2mpHistSuMacAdress) to 
        zero(00 00 00 00 00 00).  The ifIndex must be set to the ifIndex
        of the downstream channel (propDocsWirelessDownstream)."

        INDEX { ifIndex, p2mpHistSuMacAddress, p2mpHistClass }
        ::= { p2mpHistCtrlTable 1 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Children (14)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.180.1.1.1.1 p2mpHistSuMacAddress 0 0 This object is used to index this table.
    At the head end:
    When a histogram is created on a per subscriber unit basis,
    this object …
    1.3.6.1.4.1.9.9.180.1.1.1.2 p2mpHistClass 0 0 This objects used to index this table. It represents the
    attribute that is being histogrammed.
    1.3.6.1.4.1.9.9.180.1.1.1.3 p2mpHistSize 0 0 This object lets the user select the granularity of the
    histogram. The number of bins used for the capture in
    each category is ha…
    1.3.6.1.4.1.9.9.180.1.1.1.4 p2mpHistSumScale 0 0 This variable indicates the exponent to apply to the
    fixed-point values in the histogram summary table.
    1.3.6.1.4.1.9.9.180.1.1.1.5 p2mpHistSumPrecision 0 0 This variable indicates the number of decimal places used for
    precision when interpreting the fixed-point values in the
    histogram…
    1.3.6.1.4.1.9.9.180.1.1.1.6 p2mpStartBinValue 0 0 This object represents the maximum of the values that will be
    collected in the first bin of the histogram.
    All values <= p2mpStartBinValue are kept in the first histogram
    bin.
    1.3.6.1.4.1.9.9.180.1.1.1.7 p2mpEndBinValue 0 0 This object represents the minimum of the values that will be
    collected in the last bin of the histogram.
    All values >= p2mpEndBi…
    1.3.6.1.4.1.9.9.180.1.1.1.8 p2mpCollDuration 0 0 This object specifies the duration for which this histogram
    must be accumulated. After successfully accumulating data for
    this am…
    1.3.6.1.4.1.9.9.180.1.1.1.9 p2mpUpdateRate 0 0 This object represents rate at which snapshots of the histogram
    will be available.
    1.3.6.1.4.1.9.9.180.1.1.1.10 p2mpPeriodicSum 0 0 The histogram data is updated every p2mpUpdateRate seconds.
    When set to true(1), the latest histogram data set is summed
    with the…
    1.3.6.1.4.1.9.9.180.1.1.1.11 p2mpHistOwner 0 0 This object identifies management station that created this
    histogram specification.
    1.3.6.1.4.1.9.9.180.1.1.1.12 p2mpHistAction 0 0 This object represents the action to be carried out on this
    histogram specification. If a histogram has been successfully
    capture…
    1.3.6.1.4.1.9.9.180.1.1.1.13 p2mpHistStatus 0 0 This object represents the current state of this histogram.
    Once the histogram collection is complete the status changes to
    statu…
    1.3.6.1.4.1.9.9.180.1.1.1.14 p2mpHistRowStatus 0 0 This object may be used to create or delete a histogram control
    specification.