This object specifies the service mode for charging. The
charging functions in the GGSN involve mainly
collection/accumulation of CDRs and transmitting CDRs to the
Charging Gateways. The charging service-mode function has no
impact to the collection/accumulation of CDRs. The charging
service mode function only involves the transmission of CDRs
to the charging gateways. The charging service-mode has the
following two states:
'operational' : Normal operation.
'maintenance' : In this state, transmission of CDRs to the
charging gateways will not be performed;
However, collection and accumulation of CDRs
will continue as is done normally.
The default charging service-mode state is 'in-service'(This
mode is set with value as 'operational'). When the GGSN is in
'outOfService' mode set in cGgsnServiceMode, all the charging
configurations will be allowed. In the system-init phase,
the charging service mode CLI configs will not be handled.
The handling of 'Redirecting Request', 'Node Alive' and
charging gateway switchover mechanisms will not be performed
while the charging is in maintenance mode. After the mode is
changed to in-service, the messages in the pending queue will
be sent towards the newly configured active charging gateway
and the normal functions will continue from thereon.
When switching between modes, traps will be generated using
cgprsCgInServiceModeNotif and cgprsCgMaintenanceModeNotif.
This object is deprecated by cgprsCgGroupServiceMode.
Parsed from file CISCO-GPRS-CHARGING-MIB.mib
Module: CISCO-GPRS-CHARGING-MIB
This object specifies the service mode for charging. The
charging functions in the GGSN involve mainly
collection/accumulation of CDRs and transmitting CDRs to the
Charging Gateways. The charging service-mode function has no
impact to the collection/accumulation of CDRs. The charging
service mode function only involves the transmission of CDRs
to the charging gateways. The charging service-mode has the
following two states:
'operational' : Normal operation.
'maintenance' : In this state, transmission of CDRs to the
charging gateways will not be performed;
However, collection and accumulation of CDRs
will continue as is done normally.
The default charging service-mode state is 'in-service'(This
mode is set with value as 'operational'). When the GGSN is in
'outOfService' mode set in cGgsnServiceMode, all the charging
configurations will be allowed. In the system-init phase,
the charging service mode CLI configs will not be handled.
The handling of 'Redirecting Request', 'Node Alive' and
charging gateway switchover mechanisms will not be performed
while the charging is in maintenance mode. After the mode is
changed to in-service, the messages in the pending queue will
be sent towards the newly configured active charging gateway
and the normal functions will continue from thereon.
When switching between modes, traps will be generated using
cgprsCgInServiceModeNotif and cgprsCgMaintenanceModeNotif.
This object is deprecated by cgprsCgGroupServiceMode.
This object specifies the service mode for charging. The
charging functions in the GGSN involve mainly
collection/accumulation of CDRs and transmitting CDRs to the
Charging Gateways. The charging service-mode function has no
impact to the collection/accumulation of CDRs. The charging
service mode function only involves the transmission of CDRs
to the charging gateways. The charging service-mode has the
following two states:
'operational' : Normal operation.
'maintenance' : In this state, transmission of CDRs to the
charging gateways will not be performed;
However, collection and accumulation of CDRs
will continue as is done normally.
The default charging service-mode state is 'in-service'(This
mode is set with value as 'operational'). When the GGSN is in
'outOfService' mode set in cGgsnServiceMode, all the charging
configurations will be allowed. In the system-init phase,
the charging service mode CLI configs will not be handled.
The handling of 'Redirecting Request', 'Node Alive' and
charging gateway switchover mechanisms will not be performed
while the charging is in maintenance mode. After the mode is
changed to in-service, the messages in the pending queue will
be sent towards the newly configured active charging gateway
and the normal functions will continue from thereon.
When switching between modes, traps will be generated using
cgprsCgInServiceModeNotif and cgprsCgMaintenanceModeNotif.
This object is deprecated by cgprsCgGroupServiceMode.
Parsed from file CISCO-GPRS-CHARGING-MIB.my.txt
Company: None
Module: CISCO-GPRS-CHARGING-MIB
This object specifies the service mode for charging. The
charging functions in the GGSN involve mainly
collection/accumulation of CDRs and transmitting CDRs to the
Charging Gateways. The charging service-mode function has no
impact to the collection/accumulation of CDRs. The charging
service mode function only involves the transmission of CDRs
to the charging gateways. The charging service-mode has the
following two states:
'operational' : Normal operation.
'maintenance' : In this state, transmission of CDRs to the
charging gateways will not be performed;
However, collection and accumulation of CDRs
will continue as is done normally.
The default charging service-mode state is 'in-service'(This
mode is set with value as 'operational'). When the GGSN is in
'outOfService' mode set in cGgsnServiceMode, all the charging
configurations will be allowed. In the system-init phase,
the charging service mode CLI configs will not be handled.
The handling of 'Redirecting Request', 'Node Alive' and
charging gateway switchover mechanisms will not be performed
while the charging is in maintenance mode. After the mode is
changed to in-service, the messages in the pending queue will
be sent towards the newly configured active charging gateway
and the normal functions will continue from thereon.
When switching between modes, traps will be generated using
cgprsCgInServiceModeNotif and cgprsCgMaintenanceModeNotif.
This object is deprecated by cgprsCgGroupServiceMode.
cgprsCgServiceMode OBJECT-TYPE SYNTAX INTEGER { operational(1), maintenance(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the service mode for charging. The charging functions in the GGSN involve mainly collection/accumulation of CDRs and transmitting CDRs to the Charging Gateways. The charging service-mode function has no impact to the collection/accumulation of CDRs. The charging service mode function only involves the transmission of CDRs to the charging gateways. The charging service-mode has the following two states: 'operational' : Normal operation. 'maintenance' : In this state, transmission of CDRs to the charging gateways will not be performed; However, collection and accumulation of CDRs will continue as is done normally. The default charging service-mode state is 'in-service'(This mode is set with value as 'operational'). When the GGSN is in 'outOfService' mode set in cGgsnServiceMode, all the charging configurations will be allowed. In the system-init phase, the charging service mode CLI configs will not be handled. The handling of 'Redirecting Request', 'Node Alive' and charging gateway switchover mechanisms will not be performed while the charging is in maintenance mode. After the mode is changed to in-service, the messages in the pending queue will be sent towards the newly configured active charging gateway and the normal functions will continue from thereon. When switching between modes, traps will be generated using cgprsCgInServiceModeNotif and cgprsCgMaintenanceModeNotif. This object is deprecated by cgprsCgGroupServiceMode." DEFVAL { operational } ::= { ciscoGprsChargingConfig 33 }
cgprsCgServiceMode OBJECT-TYPE SYNTAX INTEGER { operational(1), maintenance(2) } ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the service mode for charging. The charging functions in the GGSN involve mainly collection/accumulation of CDRs and transmitting CDRs to the Charging Gateways. The charging service-mode function has no impact to the collection/accumulation of CDRs. The charging service mode function only involves the transmission of CDRs to the charging gateways. The charging service-mode has the following two states: 'operational' : Normal operation. 'maintenance' : In this state, transmission of CDRs to the charging gateways will not be performed; However, collection and accumulation of CDRs will continue as is done normally. The default charging service-mode state is 'in-service'(This mode is set with value as 'operational'). When the GGSN is in 'outOfService' mode set in cGgsnServiceMode, all the charging configurations will be allowed. In the system-init phase, the charging service mode CLI configs will not be handled. The handling of 'Redirecting Request', 'Node Alive' and charging gateway switchover mechanisms will not be performed while the charging is in maintenance mode. After the mode is changed to in-service, the messages in the pending queue will be sent towards the newly configured active charging gateway and the normal functions will continue from thereon. When switching between modes, traps will be generated using cgprsCgInServiceModeNotif and cgprsCgMaintenanceModeNotif. This object is deprecated by cgprsCgGroupServiceMode." DEFVAL { operational } ::= { ciscoGprsChargingConfig 33 }
Vendor: Cisco
Module: CISCO-GPRS-CHARGING-MIB
[Automatically extracted from oidview.com]
cgprsCgServiceMode OBJECT-TYPE SYNTAX INTEGER { operational(1), maintenance(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the service mode for charging. The charging functions in the GGSN involve mainly collection/accumulation of CDRs and transmitting CDRs to the Charging Gateways. The charging service-mode function has no impact to the collection/accumulation of CDRs. The charging service mode function only involves the transmission of CDRs to the charging gateways. The charging service-mode has the following two states: 'operational' : Normal operation. 'maintenance' : In this state, transmission of CDRs to the charging gateways will not be performed; However, collection and accumulation of CDRs will continue as is done normally. The default charging service-mode state is 'in-service'(This mode is set with value as 'operational'). When the GGSN is in 'outOfService' mode set in cGgsnServiceMode, all the charging configurations will be allowed. In the system-init phase, the charging service mode CLI configs will not be handled. The handling of 'Redirecting Request', 'Node Alive' and charging gateway switchover mechanisms will not be performed while the charging is in maintenance mode. After the mode is changed to in-service, the messages in the pending queue will be sent towards the newly configured active charging gateway and the normal functions will continue from thereon. When switching between modes, traps will be generated using cgprsCgInServiceModeNotif and cgprsCgMaintenanceModeNotif. This object is deprecated by cgprsCgGroupServiceMode." DEFVAL { operational } ::= { ciscoGprsChargingConfig 33 }
cgprsCgServiceMode OBJECT-TYPE SYNTAX INTEGER { operational(1), maintenance(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the service mode for charging. The charging functions in the GGSN involve mainly collection/accumulation of CDRs and transmitting CDRs to the Charging Gateways. The charging service-mode function has no impact to the collection/accumulation of CDRs. The charging service mode function only involves the transmission of CDRs to the charging gateways. The charging service-mode has the following two states: 'operational' : Normal operation. 'maintenance' : In this state, transmission of CDRs to the charging gateways will not be performed; However, collection and accumulation of CDRs will continue as is done normally. The default charging service-mode state is 'in-service'(This mode is set with value as 'operational'). When the GGSN is in 'outOfService' mode set in cGgsnServiceMode, all the charging configurations will be allowed. In the system-init phase, the charging service mode CLI configs will not be handled. The handling of 'Redirecting Request', 'Node Alive' and charging gateway switchover mechanisms will not be performed while the charging is in maintenance mode. After the mode is changed to in-service, the messages in the pending queue will be sent towards the newly configured active charging gateway and the normal functions will continue from thereon. When switching between modes, traps will be generated using cgprsCgInServiceModeNotif and cgprsCgMaintenanceModeNotif. This object is deprecated by cgprsCgGroupServiceMode." DEFVAL { operational } ::= { ciscoGprsChargingConfig 33 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.192.1.1.33.0 | cgprsCgServiceMode | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.192.1.1.1 | cgprsCgEnable | 1 | 1 | This object is used to enable/disable the charging transaction feature on the GGSN. When the object is set to 'true', charging pr… |
| 1.3.6.1.4.1.9.9.192.1.1.2 | cgprsCgCdrLocalSeqNumEnable | 1 | 1 | This object is used to enable/disable the feature of using the local record sequence number field in G-CDRs on the GGSN. When the… |
| 1.3.6.1.4.1.9.9.192.1.1.3 | cgprsCgCdrNodeIdEnable | 1 | 1 | This object is used to enable/disable the feature of using the NodeID field in G-CDRs on the GGSN. When the object is set to 'tr… |
| 1.3.6.1.4.1.9.9.192.1.1.4 | cgprsCgFlowControlEcho | 1 | 1 | This object is used to enable/disable flow control between the GGSN and CG. When the object is set to 'true', the GGSN enables pr… |
| 1.3.6.1.4.1.9.9.192.1.1.5 | cgprsCgCdrPktsStatEnable | 1 | 1 | This object is used to enable/disable G-CDR packet statistics collection. When the object is set to 'true', the G-CDR is enabled … |
| 1.3.6.1.4.1.9.9.192.1.1.6 | cgprsCgCdrNonPrimaryEnable | 1 | 1 | This object controls the generation of non-primary partial CDRs on GGSN as follows: 'true(1)' - the generation of non-primary par… |
| 1.3.6.1.4.1.9.9.192.1.1.7 | cgprsCgCdrAggreLimit | 1 | 1 | The Maximum number of G-CDRs that can be aggregated in a charging data transfer message to a CG. |
| 1.3.6.1.4.1.9.9.192.1.1.8 | cgprsCgTransInterval | 1 | 1 | Specifies the time interval between transfers of GPRS charging data for a PDP context (user session) between the GGSN and the cha… |
| 1.3.6.1.4.1.9.9.192.1.1.9 | cgprsCgPktsQSize | 1 | 1 | The maximum size of the GGSN's queue of outstanding charging data transfer requests. |
| 1.3.6.1.4.1.9.9.192.1.1.10 | cgprsCgPathRequest | 1 | 1 | The time interval between two TCP connection establishment retry attempts if the TCP connection can't be established for the comm… |
| 1.3.6.1.4.1.9.9.192.1.1.11 | cgprsCgContainerVolThresh | 1 | 1 | The traffic volume threshold that triggers addition of a container and closing the G-CDR. |
| 1.3.6.1.4.1.9.9.192.1.1.12 | cgprsCgMapDataTos | 1 | 1 | Specifies a IP Type of Service (TOS) mapping for GPRS charging data packets transmitted by the GGSN. A higher TOS mapping value i… |
| 1.3.6.1.4.1.9.9.192.1.1.13 | cgprsCgPathProtocol | 1 | 1 | Specifies the transport protocol used by the GGSN to transmit and receive charging data to and from a CG. udp - use UDP for char… |
| 1.3.6.1.4.1.9.9.192.1.1.14 | cgprsCgServerSwitchTimeout | 1 | 1 | cgprsCgServerSwitchtimeout |
| 1.3.6.1.4.1.9.9.192.1.1.15 | cgprsCgConditionLimit | 1 | 1 | The maximum number of charging condition changes to trigger closure of a G-CDR partial record. When the maximum number is reached… |
| 1.3.6.1.4.1.9.9.192.1.1.16 | cgprsCgGtpPrimePort | 1 | 1 | The destination port for transferring G-CDR between GGSN and CG. The port number is used for both UDP and TCP. |
| 1.3.6.1.4.1.9.9.192.1.1.17 | cgprsCgN3BufferSize | 1 | 1 | The transmit buffer size for sending GTP' PDU. |
| 1.3.6.1.4.1.9.9.192.1.1.18 | cgprsCgChargeForRoamersOnly | 1 | 1 | This object is used to indicate to the GGSN that it needs to generate CDRs only for roamers. When the object is set to 'false' GG… |
| 1.3.6.1.4.1.9.9.192.1.1.19 | cgprsCgTariffTimeMaxEntries | 1 | 1 | cgprsCgTarifftimeMaxEntries |
| 1.3.6.1.4.1.9.9.192.1.1.20 | cgprsCgTariffTimeNextIndex | 1 | 1 | cgprsCgTarifftimeNextIndex |
| 1.3.6.1.4.1.9.9.192.1.1.21 | cgprsCgTariffTimeTable | 1 | 6 | cgprsCgTarifftimeTable |
| 1.3.6.1.4.1.9.9.192.1.1.22 | cgprsCgGatewayTable | 1 | 7 | Charging gateway table. The table contains a list of charging gateways. A charging gateway contains databases to store the collect… |
| 1.3.6.1.4.1.9.9.192.1.1.23 | cgprsCgClearCdrPartialCdr | 1 | 1 | This object is used to close all existing CDRs, transfer them to the CG and open new partial CDRs for any existing PDP contexts. c… |
| 1.3.6.1.4.1.9.9.192.1.1.24 | cgprsCgSgsnChangeLimit | 1 | 1 | This object denotes the maximum number of SGSN changes that will trigger the closure of G-CDR or partial record. When the maximum… |
| 1.3.6.1.4.1.9.9.192.1.1.25 | cgprsCgCdrSgsnChangeLimit | 1 | 1 | This object denotes the maximum number of SGSN changes that will trigger the closure of G-CDR or partial record. When the maximum… |
| 1.3.6.1.4.1.9.9.192.1.1.26 | cgprsCgRelease | 1 | 1 | This object specifies the release specific parameters that needs to be used when communicating with the CG. for eg: Qos Profile I… |
| 1.3.6.1.4.1.9.9.192.1.1.27 | cgprsCgGtpShortHeaderEnable | 1 | 1 | This object enables the GGSN to use the 6-byte GTP short header for charging transactions. This object cannot be toggled when the… |
| 1.3.6.1.4.1.9.9.192.1.1.28 | cgprsCgTransFormNumRespEnable | 1 | 1 | When this object is set to 'true', the data record transfer response IE uses the one octet format which contains the number of re… |
| 1.3.6.1.4.1.9.9.192.1.1.29 | cgprsCgContainerTimeLimit | 1 | 1 | A G-CDR is used to collect charging information related to the packet data information for a GPRS mobile in the GGSN.The List of … |
| 1.3.6.1.4.1.9.9.192.1.1.30 | cgprsCgProfileTable | 1 | 26 | Charging characteristics is a parameter introduced in Release 99.Charging Characteristics allows the operator to apply different … |
| 1.3.6.1.4.1.9.9.192.1.1.31 | cgprsCgProfileMapTable | 1 | 6 | This table maintains the default charging profile mappings. The profile set in cgprsCgProfileTable will be mapped to the default … |
| 1.3.6.1.4.1.9.9.192.1.1.32 | cgprsCgChargingCharReject | 1 | 1 | This object defines whether the incoming PDP create request has to be rejected or accepted depending on the charging profile matc… |
| 1.3.6.1.4.1.9.9.192.1.1.34 | cgprsCgPartialCdrGenEnable | 1 | 1 | A Primary CDR refers to the first CDR for a PDP. Subsequent CDR's, called secondary CDR's, will be opened when the primary CDR is… |
| 1.3.6.1.4.1.9.9.192.1.1.35 | cgprsCgSwitchOverPriority | 1 | 1 | This object is used to enable the switch over priority mechanism. 'true' - If a higher priority CG comes up, it becomes the activ… |
| 1.3.6.1.4.1.9.9.192.1.1.36 | cgprsCgCharSelectionMode | 1 | 1 | This object is used to add the charging characteristic selection mode in the CDR. 'true' - Charging characteristic selection mod… |
| 1.3.6.1.4.1.9.9.192.1.1.37 | cgprsCgReconnect | 1 | 1 | This object enables the charging reconnect feature. This feature when enabled, reconnects to the CG that is unreachable due to so… |
| 1.3.6.1.4.1.9.9.192.1.1.38 | cgprsCgPtcEnable | 1 | 1 | When this object is set, GGSN sends the Packet Transfer Command (PTC) IE in the CDR message. 'true' - send PTC IE with the CDR. … |
| 1.3.6.1.4.1.9.9.192.1.1.39 | cgprsCgPtcPossiblyDupEnable | 1 | 1 | This object is used to send possibly duplicated Data Record Packet. When the CDR packet is directed to a secondary CGF (by a CDR … |
| 1.3.6.1.4.1.9.9.192.1.1.40 | cgprsCgCdrOptionServiceRecord | 1 | 1 | G-CDRs contain information for part, or the entire duration, of a PDP context. The G-CDR includes information such as the subscri… |
| 1.3.6.1.4.1.9.9.192.1.1.41 | cgprsCgPartialCdrGenEnableAll | 1 | 1 | This object when set to 'true' enables the GGSN to copy the SGSN list for charging release prior to release 4 (cgprsCgRelease). T… |
| 1.3.6.1.4.1.9.9.192.1.1.42 | cgprsCgCdrOptionApn | 1 | 1 | This object when set to 'true' includes real APN in the G-CDR and accounting records. If object is set to 'false'- Access Point N… |
| 1.3.6.1.4.1.9.9.192.1.1.43 | cgprsCgCdrOptionVirtualApn | 1 | 1 | This object when set to 'true' includes virtual APN in G-CDR and accounting records. If this object is set to 'false'- Real APN i… |
| 1.3.6.1.4.1.9.9.192.1.1.44 | cgprsCgCdrOptionApnSelMode | 1 | 1 | This object when set to 'true' includes 'APN selection mode' field in G-CDR and sent to CG. The field 'APN selection mode' indica… |
| 1.3.6.1.4.1.9.9.192.1.1.45 | cgprsCgCdrOptionDynamicAddr | 1 | 1 | This object when set to 'true' includes 'Dynamic Address' field in G-CDR and sent to CG. This field indicates that PDP address ha… |
| 1.3.6.1.4.1.9.9.192.1.1.46 | cgprsCgCdrOptionNip | 1 | 1 | This object when set to 'true' includes NIP (Network Initiated PDP context) field in G-CDR and sent to CG. This field indicates t… |
| 1.3.6.1.4.1.9.9.192.1.1.47 | cgprsCgCdrOptionPdpAddress | 1 | 1 | This object when set to 'true' includes 'Served PDP Address' field in G-CDR and sent to CG. This field (Served PDP Address) conta… |
| 1.3.6.1.4.1.9.9.192.1.1.48 | cgprsCgCdrOptionPdpType | 1 | 1 | This object if set to 'true' includes 'PDP Type' field in G-CDRs. This field defines the PDP type,e.g.IP,PPP or IHOSS:OSP. |
| 1.3.6.1.4.1.9.9.192.1.1.49 | cgprsCgCdrOptionSerMsisdn | 1 | 1 | This object when set to 'true' enable the GGSN to provide the MSISDN number from the create PDP context request in the G-CDRs. Thi… |
| 1.3.6.1.4.1.9.9.192.1.1.50 | cgprsCgCdrOptionSgsnPlmn | 1 | 1 | This object whe set to 'true' includes SGSN PLMN ID (MCC and MNC) in the G-CDR and sent to CG. The SGSN PLMN ID field contains a … |
| 1.3.6.1.4.1.9.9.192.1.1.51 | cgprsCgCdrOptionCamelCharInfo | 1 | 1 | This object if set to 'true', S-CDR CAMEL information recieved from SGSN, which is a copy of Tag and Length from SGSN's CDR (S-CD… |
| 1.3.6.1.4.1.9.9.192.1.1.52 | cgprsCgCdrOptionImeisv | 1 | 1 | This object when set to 'true' the IMEI (Software Version) IE shall be handled by GGSN in a transparent manner and shall be sent … |
| 1.3.6.1.4.1.9.9.192.1.1.53 | cgprsCgCdrOptionMsTimeZone | 1 | 1 | This object when set to 'true' includes MS Time Zone field in the G-CDRs and sent to CG. MS Time Zone indicates the offset betwee… |
| 1.3.6.1.4.1.9.9.192.1.1.54 | cgprsCgCdrOptionRatType | 1 | 1 | This object when set to 'true' includes Radio Access Type (RAT) IE in the G-CDRs and sent to CG. RAT, indicates whether the SGSN … |
| 1.3.6.1.4.1.9.9.192.1.1.55 | cgprsCgCdrOptionUserLocInfo | 1 | 1 | This object when set to 'true' includes the User Location Information IE in G-CDRs and sent to CG. User Location Information give… |
| 1.3.6.1.4.1.9.9.192.1.1.56 | cgprsCgServiceRecordIncludeRat | 1 | 1 | This object when set to 'true', writes the RAT value into into the service record when RAT change is recieved. If this object is … |
| 1.3.6.1.4.1.9.9.192.1.1.57 | cgprsCgServiceRecordIncludePlmn | 1 | 1 | This object when set to 'true', writes the PLMN-ID of the PDP into the service record when there is change in the PLMN-ID. If this… |
| 1.3.6.1.4.1.9.9.192.1.1.58 | cgprsCgChargingSrcInterface | 1 | 1 | This object specifies the loopback interface to be used by GGSN as the charging source interface. When this is set to any value o… |
| 1.3.6.1.4.1.9.9.192.1.1.59 | cgprsCgServiceRecordIncludeUserLocInfo | 1 | 1 | When this object is set to 'true', the user location information of the PDP is written into the service record when there is chan… |
| 1.3.6.1.4.1.9.9.192.1.1.60 | cgprsCgGroupTable | 1 | 6 | Charging gateway group table. The table contains a list of charging groups. In each charging group, a unique primary, secondary, … |
| 1.3.6.1.4.1.9.9.192.1.1.61 | cgprsCgGatewayIpTable | 1 | 8 | Charging gateway table. The table contains a list of charging gateways. A charging gateway contains databases to store the collect… |
| 1.3.6.1.4.1.9.9.192.1.1.62 | cgprsCgProfileContentDccaProfileTable | 1 | 4 | This table contains the list of DCCA Profiles configured as part of the charging profile. |
| 1.3.6.1.4.1.9.9.192.1.1.63 | cgprsCgScdrEnable | 1 | 1 | This object specifies whether the SGW CDR generation is enabled or disabled, for the sessions in SPGW mode. When set to 'true' SGW… |