The current number of active PPPoE sessions within
this system.
Parsed from file CISCO-PPPOE-MIB.mib
Module: CISCO-PPPOE-MIB
The current number of active PPPoE sessions within
this system.
The current number of active PPPoE sessions within
this system.
Parsed from file CISCO-PPPOE-MIB.my.txt
Company: None
Module: CISCO-PPPOE-MIB
The current number of active PPPoE sessions within
this system.
cPppoeSystemCurrSessions OBJECT-TYPE SYNTAX Gauge32 UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of active PPPoE sessions within this system." ::= { cPppoeSystemSessionInfo 1 }
cPppoeSystemCurrSessions OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current number of active PPPoE sessions within this system." ::= { cPppoeSystemSessionInfo 1 }
Vendor: Cisco
Module: CISCO-PPPOE-MIB
[Automatically extracted from oidview.com]
cPppoeSystemCurrSessions OBJECT-TYPE SYNTAX Gauge32 UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of active PPPoE sessions within this system." ::= { cPppoeSystemSessionInfo 1 }
cPppoeSystemCurrSessions OBJECT-TYPE SYNTAX Gauge32 UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of active PPPoE sessions within this system." ::= { cPppoeSystemSessionInfo 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.194.1.1.1.0 | cPppoeSystemCurrSessions | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.194.1.1.2 | cPppoeSystemHighWaterSessions | 1 | 1 | The high water mark of the established PPPoE sessions since the system was initialized. |
1.3.6.1.4.1.9.9.194.1.1.3 | cPppoeSystemMaxAllowedSessions | 1 | 1 | Maximum number of allowed PPPoE sessions within the system. |
1.3.6.1.4.1.9.9.194.1.1.4 | cPppoeSystemThresholdSessions | 1 | 1 | Threshold value of the established PPPoE sessions within the system. Default value is equal to cPppoeSystemMaxSessionsConfigurable |
1.3.6.1.4.1.9.9.194.1.1.5 | cPppoeSystemExceededSessionErrors | 1 | 1 | The accumulated number of errors for establishing PPPoE session in the system due to the cPppoeSystemCurrSessions value exceeds th… |
1.3.6.1.4.1.9.9.194.1.1.6 | cPppoeSystemPerMacSessionlimit | 1 | 1 | This object provides limit on number of PPPoE sessions for a single client Ethernet MAC address. If the limit is reached new sess… |
1.3.6.1.4.1.9.9.194.1.1.7 | cPppoeSystemPerMacIWFSessionlimit | 1 | 1 | This object provides limit on number of PPPoE sessions with interworking flag(IWF) enabled, from a single client MAC address. If … |
1.3.6.1.4.1.9.9.194.1.1.8 | cPppoeSystemPerMacThrottleRatelimit | 1 | 1 | This object provides the rate limit at which PPPoE session were created from a single client MAC address. During a configured tim… |
1.3.6.1.4.1.9.9.194.1.1.9 | cPppoeSystemPerVLANlimit | 1 | 1 | This object provides limit on number of PPPoE sessions on a particular Vlan. If the limit is reached new session request on this … |
1.3.6.1.4.1.9.9.194.1.1.10 | cPppoeSystemPerVLANthrottleRatelimit | 1 | 1 | This object provides the rate limit at which PPPoE session were created on a Vlan. During a configured time interval once the num… |
1.3.6.1.4.1.9.9.194.1.1.11 | cPppoeSystemPerVClimit | 1 | 1 | This object provides limit on number of PPPoE sessions on a particular ATM-VC. If the limit is reached new session request on thi… |
1.3.6.1.4.1.9.9.194.1.1.12 | cPppoeSystemPerVCThrottleRatelimit | 1 | 1 | This object provides the rate limit at which PPPoE session were created on an ATM-VC. During a configured time interval, once the… |
1.3.6.1.4.1.9.9.194.1.1.13 | cPppoeSystemSessionLossThreshold | 1 | 1 | This object is used to monitor number of active PPPoE sessions above a healthy watermark. If number of PPPoE sessions falls below… |
1.3.6.1.4.1.9.9.194.1.1.14 | cPppoeSystemSessionLossPercent | 1 | 1 | This object is used to monitor the percentage of PPPoE sessions going down at a configured time interval. During a time interval… |