Indicates whether the dcef mode is enabled on the standby
supervisor or not.
'true' - Setting cc6kxbarDcefOnlyModeAllowed to 'true'
makes the cc6kxbarModuleModeSwitchingMode of
all the active modules to 'dcefmode'.
With the active fabric module present in the system,
with the switch being in stateful switchover mode,
with all the cards that has no distributed Cisco
Express forwarding switching support being
powered down and on some platforms with standby
supervisor ports being shutdown, changing
cc6kxbarDcefOnlyModeAllowed to 'true' will make the
standby supervisor module reloaded and booted up
as distributed forwarding module.
'false'- Setting cc6kxbarDcefOnlyModeAllowed to 'false'
makes the cc6kxbarModuleModeSwitchingMode of the
standby supervisor module to the default value.
Changing cc6kxbarDcefOnlyModeAllowed to 'false'
will make the standby supervisor reloaded and booted
up with the default cc6kxbarModuleModeSwitchingMode.
Parsed from file CISCO-CAT6K-CROSSBAR-MIB.mib
Module: CISCO-CAT6K-CROSSBAR-MIB
Indicates whether the dcef mode is enabled on the standby
supervisor or not.
'true' - Setting cc6kxbarDcefOnlyModeAllowed to 'true'
makes the cc6kxbarModuleModeSwitchingMode of
all the active modules to 'dcefmode'.
With the active fabric module present in the system,
with the switch being in stateful switchover mode,
with all the cards that has no distributed Cisco
Express forwarding switching support being
powered down and on some platforms with standby
supervisor ports being shutdown, changing
cc6kxbarDcefOnlyModeAllowed to 'true' will make the
standby supervisor module reloaded and booted up
as distributed forwarding module.
'false'- Setting cc6kxbarDcefOnlyModeAllowed to 'false'
makes the cc6kxbarModuleModeSwitchingMode of the
standby supervisor module to the default value.
Changing cc6kxbarDcefOnlyModeAllowed to 'false'
will make the standby supervisor reloaded and booted
up with the default cc6kxbarModuleModeSwitchingMode.
Indicates whether the dcef mode is enabled on the standby
supervisor or not.
'true' - Setting cc6kxbarDcefOnlyModeAllowed to 'true'
makes the cc6kxbarModuleModeSwitchingMode of
all the active modules to 'dcefmode'.
With the active fabric module present in the system,
with the switch being in stateful switchover mode,
with all the cards that has no distributed Cisco
Express forwarding switching support being
powered down and on some platforms with standby
supervisor ports being shutdown, changing
cc6kxbarDcefOnlyModeAllowed to 'true' will make the
standby supervisor module reloaded and booted up
as distributed forwarding module.
'false'- Setting cc6kxbarDcefOnlyModeAllowed to 'false'
makes the cc6kxbarModuleModeSwitchingMode of the
standby supervisor module to the default value.
Changing cc6kxbarDcefOnlyModeAllowed to 'false'
will make the standby supervisor reloaded and booted
up with the default cc6kxbarModuleModeSwitchingMode.
Parsed from file CISCO-CAT6K-CROSSBAR-MIB.my.txt
Company: None
Module: CISCO-CAT6K-CROSSBAR-MIB
Indicates whether the dcef mode is enabled on the standby
supervisor or not.
'true' - Setting cc6kxbarDcefOnlyModeAllowed to 'true'
makes the cc6kxbarModuleModeSwitchingMode of
all the active modules to 'dcefmode'.
With the active fabric module present in the system,
with the switch being in stateful switchover mode,
with all the cards that has no distributed Cisco
Express forwarding switching support being
powered down and on some platforms with standby
supervisor ports being shutdown, changing
cc6kxbarDcefOnlyModeAllowed to 'true' will make the
standby supervisor module reloaded and booted up
as distributed forwarding module.
'false'- Setting cc6kxbarDcefOnlyModeAllowed to 'false'
makes the cc6kxbarModuleModeSwitchingMode of the
standby supervisor module to the default value.
Changing cc6kxbarDcefOnlyModeAllowed to 'false'
will make the standby supervisor reloaded and booted
up with the default cc6kxbarModuleModeSwitchingMode.
cc6kxbarDcefOnlyModeAllowed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the dcef mode is enabled on the standby supervisor or not. 'true' - Setting cc6kxbarDcefOnlyModeAllowed to 'true' makes the cc6kxbarModuleModeSwitchingMode of all the active modules to 'dcefmode'. With the active fabric module present in the system, with the switch being in stateful switchover mode, with all the cards that has no distributed Cisco Express forwarding switching support being powered down and on some platforms with standby supervisor ports being shutdown, changing cc6kxbarDcefOnlyModeAllowed to 'true' will make the standby supervisor module reloaded and booted up as distributed forwarding module. 'false'- Setting cc6kxbarDcefOnlyModeAllowed to 'false' makes the cc6kxbarModuleModeSwitchingMode of the standby supervisor module to the default value. Changing cc6kxbarDcefOnlyModeAllowed to 'false' will make the standby supervisor reloaded and booted up with the default cc6kxbarModuleModeSwitchingMode." ::= { cc6kxbarConfiguration 7 }
cc6kxbarDcefOnlyModeAllowed OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the dcef mode is enabled on the standby supervisor or not. 'true' - Setting cc6kxbarDcefOnlyModeAllowed to 'true' makes the cc6kxbarModuleModeSwitchingMode of all the active modules to 'dcefmode'. With the active fabric module present in the system, with the switch being in stateful switchover mode, with all the cards that has no distributed Cisco Express forwarding switching support being powered down and on some platforms with standby supervisor ports being shutdown, changing cc6kxbarDcefOnlyModeAllowed to 'true' will make the standby supervisor module reloaded and booted up as distributed forwarding module. 'false'- Setting cc6kxbarDcefOnlyModeAllowed to 'false' makes the cc6kxbarModuleModeSwitchingMode of the standby supervisor module to the default value. Changing cc6kxbarDcefOnlyModeAllowed to 'false' will make the standby supervisor reloaded and booted up with the default cc6kxbarModuleModeSwitchingMode." ::= { cc6kxbarConfiguration 7 }
Vendor: Cisco
Module: CISCO-CAT6K-CROSSBAR-MIB
[Automatically extracted from oidview.com]
cc6kxbarDcefOnlyModeAllowed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the dcef mode is enabled on the standby supervisor or not. 'true' - Setting cc6kxbarDcefOnlyModeAllowed to 'true' makes the cc6kxbarModuleModeSwitchingMode of all the active modules to 'dcefmode'. With the active fabric module present in the system, with the switch being in stateful switchover mode, with all the cards that has no distributed Cisco Express forwarding switching support being powered down and on some platforms with standby supervisor ports being shutdown, changing cc6kxbarDcefOnlyModeAllowed to 'true' will make the standby supervisor module reloaded and booted up as distributed forwarding module. 'false'- Setting cc6kxbarDcefOnlyModeAllowed to 'false' makes the cc6kxbarModuleModeSwitchingMode of the standby supervisor module to the default value. Changing cc6kxbarDcefOnlyModeAllowed to 'false' will make the standby supervisor reloaded and booted up with the default cc6kxbarModuleModeSwitchingMode." ::= { cc6kxbarConfiguration 7 }
cc6kxbarDcefOnlyModeAllowed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the dcef mode is enabled on the standby supervisor or not. 'true' - Setting cc6kxbarDcefOnlyModeAllowed to 'true' makes the cc6kxbarModuleModeSwitchingMode of all the active modules to 'dcefmode'. With the active fabric module present in the system, with the switch being in stateful switchover mode, with all the cards that has no distributed Cisco Express forwarding switching support being powered down and on some platforms with standby supervisor ports being shutdown, changing cc6kxbarDcefOnlyModeAllowed to 'true' will make the standby supervisor module reloaded and booted up as distributed forwarding module. 'false'- Setting cc6kxbarDcefOnlyModeAllowed to 'false' makes the cc6kxbarModuleModeSwitchingMode of the standby supervisor module to the default value. Changing cc6kxbarDcefOnlyModeAllowed to 'false' will make the standby supervisor reloaded and booted up with the default cc6kxbarModuleModeSwitchingMode." ::= { cc6kxbarConfiguration 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.217.1.1.7.0 | cc6kxbarDcefOnlyModeAllowed | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.217.1.1.1 | cc6kxbarFallbackMode | 1 | 1 | cc6kxbarFallbackMode controls system fallback to bus-mode after loss of switching fabric module. 'true' - When the last fabric c… |
1.3.6.1.4.1.9.9.217.1.1.2 | cc6kxbarBusOnlyModeAllowed | 1 | 1 | Indicates whether bus mode is administratively enabled on the device or not. |
1.3.6.1.4.1.9.9.217.1.1.3 | cc6kxbarTruncatedModeAllowed | 1 | 1 | Indicates whether truncated mode is administratively enabled on the device or not. |
1.3.6.1.4.1.9.9.217.1.1.4 | cc6kxbarMinFabricPresent | 1 | 1 | This object indicates the minimum number of switching fabric capable modules to be present in the system, for any switching fabri… |
1.3.6.1.4.1.9.9.217.1.1.5 | cc6kxbarLcdBannerTable | 1 | 4 | cc6kxbarLcdBannerTable configures the Lcd banner of the fabric module. |
1.3.6.1.4.1.9.9.217.1.1.6 | cc6kxbarTruncatedModeOper | 1 | 1 | Indicates if the truncated mode is operationally enabled on the device or not. 'true' - With the fabric module present in the sys… |
1.3.6.1.4.1.9.9.217.1.1.8 | cc6kxbarForceBusMode | 1 | 1 | Indicates whether some affected modules are forced to be in 'busmode' or not. 'true' - Setting cc6kxbarForceBusMode to 'true' mak… |
1.3.6.1.4.1.9.9.217.1.1.9 | cc6kxbarBusOnlyModeOper | 1 | 1 | Indicates if the bus mode is operationally enabled on the device or not. 'true' - Modules are allowed to run in 'busmode'. 'false'… |