This object specifies the compliance level for the
particular GGSN version present in cGgsnVersion. This
object can be used to set back the compliance level to
the previous GGSN version.
When set to 'default', the compliance level for that
GGSN version indicated by the object cGgsnVersion will
be considered.
Currently, when the cGgsnVersion is holding a value of
'release50', the compliance level can be set back to
'release40'. This object is deprecated as the standard
GGSN 8.0 release deprecated this configuration.
Parsed from file CISCO-GGSN-MIB.mib
Module: CISCO-GGSN-MIB
This object specifies the compliance level for the
particular GGSN version present in cGgsnVersion. This
object can be used to set back the compliance level to
the previous GGSN version.
When set to 'default', the compliance level for that
GGSN version indicated by the object cGgsnVersion will
be considered.
Currently, when the cGgsnVersion is holding a value of
'release50', the compliance level can be set back to
'release40'. This object is deprecated as the standard
GGSN 8.0 release deprecated this configuration.
This object specifies the compliance level for the
particular GGSN version present in cGgsnVersion. This
object can be used to set back the compliance level to
the previous GGSN version.
When set to 'default', the compliance level for that
GGSN version indicated by the object cGgsnVersion will
be considered.
Currently, when the cGgsnVersion is holding a value of
'release50', the compliance level can be set back to
'release40'. This object is deprecated as the standard
GGSN 8.0 release deprecated this configuration.
Parsed from file CISCO-GGSN-MIB.my.txt
Company: None
Module: CISCO-GGSN-MIB
This object specifies the compliance level for the
particular GGSN version present in cGgsnVersion. This
object can be used to set back the compliance level to
the previous GGSN version.
When set to 'default', the compliance level for that
GGSN version indicated by the object cGgsnVersion will
be considered.
Currently, when the cGgsnVersion is holding a value of
'release50', the compliance level can be set back to
'release40'. This object is deprecated as the standard
GGSN 8.0 release deprecated this configuration.
cGgsnCompliance3GppGgsn OBJECT-TYPE SYNTAX INTEGER { default(0), release40(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the compliance level for the particular GGSN version present in cGgsnVersion. This object can be used to set back the compliance level to the previous GGSN version. When set to 'default', the compliance level for that GGSN version indicated by the object cGgsnVersion will be considered. Currently, when the cGgsnVersion is holding a value of 'release50', the compliance level can be set back to 'release40'. This object is deprecated as the standard GGSN 8.0 release deprecated this configuration." REFERENCE "3GPP TS 29.060 v3.15.0/v4.6.0/v5.4.0" DEFVAL { default } ::= { cGgsnConfigurations 17 }
cGgsnCompliance3GppGgsn OBJECT-TYPE SYNTAX INTEGER { release40(1) } ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the compliance level for the particular GGSN version present in cGgsnVersion. This object can be used to set back the compliance level to the previous GGSN version. When set to 'default', the compliance level for that GGSN version indicated by the object cGgsnVersion will be considered. Currently, when the cGgsnVersion is holding a value of 'release50', the compliance level can be set back to 'release40'. This object is deprecated as the standard GGSN 8.0 release deprecated this configuration." REFERENCE "3GPP TS 29.060 v3.15.0/v4.6.0/v5.4.0" ::= { cGgsnConfigurations 17 }
Vendor: Cisco
Module: CISCO-GGSN-MIB
[Automatically extracted from oidview.com]
cGgsnCompliance3GppGgsn OBJECT-TYPE SYNTAX INTEGER { default(0), release40(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the compliance level for the particular GGSN version present in cGgsnVersion. This object can be used to set back the compliance level to the previous GGSN version. When set to 'default', the compliance level for that GGSN version indicated by the object cGgsnVersion will be considered. Currently, when the cGgsnVersion is holding a value of 'release50', the compliance level can be set back to 'release40'. This object is deprecated as the standard GGSN 8.0 release deprecated this configuration." REFERENCE "3GPP TS 29.060 v3.15.0/v4.6.0/v5.4.0" DEFVAL { default } ::= { cGgsnConfigurations 17 }
cGgsnCompliance3GppGgsn OBJECT-TYPE SYNTAX INTEGER { default(0), release40(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the compliance level for the particular GGSN version present in cGgsnVersion. This object can be used to set back the compliance level to the previous GGSN version. When set to 'default', the compliance level for that GGSN version indicated by the object cGgsnVersion will be considered. Currently, when the cGgsnVersion is holding a value of 'release50', the compliance level can be set back to 'release40'. This object is deprecated as the standard GGSN 8.0 release deprecated this configuration." REFERENCE "3GPP TS 29.060 v3.15.0/v4.6.0/v5.4.0" DEFVAL { default } ::= { cGgsnConfigurations 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.240.1.3.17.0 | cGgsnCompliance3GppGgsn | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.240.1.3.1 | cGgsnDefaultIpAllocationMethod | 1 | 1 | Specifies the default method by which the GGSN obtains address leases for mobile user sessions. - 'disable', which indicates that… |
| 1.3.6.1.4.1.9.9.240.1.3.2 | cGgsnIdlePdpPurgeTimer | 1 | 1 | This object specifies the time that the GGSN waits before purging idle PDP contexts. A value '0' will disable the purge timer. |
| 1.3.6.1.4.1.9.9.240.1.3.3 | cGgsnIpDupProtectTable | 1 | 8 | This table contains the range of IP address used in the GPRS PLMN. These IP addresses are used to avoid IP address duplication in… |
| 1.3.6.1.4.1.9.9.240.1.3.4 | cGgsnDefaultAggregTable | 1 | 5 | This table contains the list of default aggregate routes configured on the GGSN. GGSN uses a static host route to forward user da… |
| 1.3.6.1.4.1.9.9.240.1.3.5 | cGgsnDefaultAaaAuthServerGroup | 1 | 1 | This object specifies the AAA radius server group that is used for authentication by all APN's on this GGSN. |
| 1.3.6.1.4.1.9.9.240.1.3.6 | cGgsnDefaultAaaAccServerGroup | 1 | 1 | This object specifies the AAA radius server group that is used for accounting by all APN's on this GGSN. |
| 1.3.6.1.4.1.9.9.240.1.3.7 | cGgsnPppVirtualTemplate | 1 | 1 | This object represents the virtual template interface used by PPP Type PDP's. |
| 1.3.6.1.4.1.9.9.240.1.3.8 | cGgsnPppRegenVirtualTemplate | 1 | 1 | This object represents the virtual template interface used for PPP Regeneration by the APN's on which PPP Regeneration is configu… |
| 1.3.6.1.4.1.9.9.240.1.3.9 | cGgsnPlmnIpAddrRangeTable | 1 | 8 | This table contains the range of IP addresses that belong to the PLMN nodes in a GPRS network. This range does not include addres… |
| 1.3.6.1.4.1.9.9.240.1.3.10 | cGgsnImsConfigurations | 2 | 18 | None |
| 1.3.6.1.4.1.9.9.240.1.3.11 | cGgsnMemoryThreshold | 1 | 1 | GGSN memory overload protection is a mechanism to prevent GGSN from completely running out of memory when GGSN is running near it… |
| 1.3.6.1.4.1.9.9.240.1.3.12 | cGgsnServiceMode | 1 | 1 | GGSN supports this GPRS service mode for maintenance purposes. Two modes are supported in GGSN, operational and maintenance mode.… |
| 1.3.6.1.4.1.9.9.240.1.3.13 | cGgsnPlmnTable | 1 | 5 | Mobile Country Code (MCC) and Mobile Network Code (MNC) together identify a GPRS PLMN of an operator. PLMN Ids other than home PL… |
| 1.3.6.1.4.1.9.9.240.1.3.14 | cGgsnSessionTimeout | 1 | 1 | This object specifies the PDP context timeout value. The PDP context will be terminated after this timer expiry. The value presen… |
| 1.3.6.1.4.1.9.9.240.1.3.15 | cGgsnThruputIntervalOne | 1 | 1 | This object and cGgsnThruputIntervalTwo specifies the interval at which the data throughput needs to be collected per APN/SGSN. On… |
| 1.3.6.1.4.1.9.9.240.1.3.16 | cGgsnThruputIntervalTwo | 1 | 1 | This object specifies the time interval TWO for collecting the throughput per APN/SGSN. This object is same as cGgsnThruputInterv… |
| 1.3.6.1.4.1.9.9.240.1.3.18 | cGgsnCreateReqV1UpdExistPdp | 1 | 1 | This object is used for backward compatibility due to to implementation of CR 311. CR 311: The SGSN shall not send a Create PDP C… |
| 1.3.6.1.4.1.9.9.240.1.3.19 | cGgsnRadAttrSessTimeout | 1 | 1 | This object is used for enabling the session timeout feature on the global (router) level set using cGgsnSessionTimeout, APN leve… |
| 1.3.6.1.4.1.9.9.240.1.3.20 | cGgsnDownlinkVerifyMsDisable | 1 | 1 | This object enables the feature which will allow the GGSN to route IP packets beyond MS. This works only if a static route is add… |
| 1.3.6.1.4.1.9.9.240.1.3.21 | cGgsnSlbMode | 1 | 1 | GTP SLB can operate in two modes-dispatched and directed. - 'dispatched' mode: It forwards the create request without changing th… |
| 1.3.6.1.4.1.9.9.240.1.3.22 | cGgsnSlbNotif | 1 | 1 | This object is used to enable or disable the GGSN behavior of sending CAC failure notification to SLB, or session failure notific… |
| 1.3.6.1.4.1.9.9.240.1.3.23 | cGgsnSlbVserverTable | 1 | 7 | This table includes the different virtual servers (IP address of virtual servers) and the elements gives the interface to reach t… |
| 1.3.6.1.4.1.9.9.240.1.3.24 | cGgsnSlbNotifyCacFailure | 1 | 1 | This object is used to enable or disable the GGSN behavior of sending CAC failure notification to SLB. CAC fails on GGSN if eithe… |
| 1.3.6.1.4.1.9.9.240.1.3.25 | cGgsnSlbNotifySessionDeletion | 1 | 1 | This object is used to enable or disable the GGSN behavior of sending session deletion notification to SLB. If this object is set… |