This object is used to enable SNMP remote control
on the Wavecom upconvertor.
When it is set to true(1), SNMP remote control is
enabled on the upconvertor.
When it is set to false(2), SNMP remote control is
disabled and front panel manual operation is enabled.
This object is meaningful only if
ccaHCCPMemChanSwitchType is ucWavecom(2).
Parsed from file CISCO-CABLE-AVAILABILITY-MIB.mib
Module: CISCO-CABLE-AVAILABILITY-MIB
This object is used to enable SNMP remote control
on the Wavecom upconvertor.
When it is set to true(1), SNMP remote control is
enabled on the upconvertor.
When it is set to false(2), SNMP remote control is
disabled and front panel manual operation is enabled.
This object is meaningful only if
ccaHCCPMemChanSwitchType is ucWavecom(2).
This object is used to enable SNMP remote control
on the Wavecom upconvertor.
When it is set to true(1), SNMP remote control is
enabled on the upconvertor.
When it is set to false(2), SNMP remote control is
disabled and front panel manual operation is enabled.
This object is meaningful only if
ccaHCCPMemChanSwitchType is ucWavecom(2).
Parsed from file CISCO-CABLE-AVAILABILITY-MIB.my.txt
Company: None
Module: CISCO-CABLE-AVAILABILITY-MIB
This object is used to enable SNMP remote control
on the Wavecom upconvertor.
When it is set to true(1), SNMP remote control is
enabled on the upconvertor.
When it is set to false(2), SNMP remote control is
disabled and front panel manual operation is enabled.
This object is meaningful only if
ccaHCCPMemChanSwitchType is ucWavecom(2).
ccaHCCPMemChanSwitchSnmpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable SNMP remote control on the Wavecom upconvertor. When it is set to true(1), SNMP remote control is enabled on the upconvertor. When it is set to false(2), SNMP remote control is disabled and front panel manual operation is enabled. This object is meaningful only if ccaHCCPMemChanSwitchType is ucWavecom(2)." ::= { ccaHCCPMemChanSwitchEntry 10 }
ccaHCCPMemChanSwitchSnmpEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enable SNMP remote control on the Wavecom upconvertor. When it is set to true(1), SNMP remote control is enabled on the upconvertor. When it is set to false(2), SNMP remote control is disabled and front panel manual operation is enabled. This object is meaningful only if ccaHCCPMemChanSwitchType is ucWavecom(2)." ::= { ccaHCCPMemChanSwitchEntry 10 }
Vendor: Cisco
Module: CISCO-CABLE-AVAILABILITY-MIB
[Automatically extracted from oidview.com]
ccaHCCPMemChanSwitchSnmpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable SNMP remote control on the Wavecom upconvertor. When it is set to true(1), SNMP remote control is enabled on the upconvertor. When it is set to false(2), SNMP remote control is disabled and front panel manual operation is enabled. This object is meaningful only if ccaHCCPMemChanSwitchType is ucWavecom(2)." ::= { ccaHCCPMemChanSwitchEntry 10 }
ccaHCCPMemChanSwitchSnmpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable SNMP remote control on the Wavecom upconvertor. When it is set to true(1), SNMP remote control is enabled on the upconvertor. When it is set to false(2), SNMP remote control is disabled and front panel manual operation is enabled. This object is meaningful only if ccaHCCPMemChanSwitchType is ucWavecom(2)." ::= { ccaHCCPMemChanSwitchEntry 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.242.1.1.6.1.1 | ccaHCCPMemChanSwitchID | 0 | 0 | Uniquely identifies the entry for channel switch for a member. The channel switch is the RF component that allows downstream and … |
1.3.6.1.4.1.9.9.242.1.1.6.1.2 | ccaHCCPMemChanSwitchType | 0 | 0 | ccaHCCPMemChanSwitchtype |
1.3.6.1.4.1.9.9.242.1.1.6.1.3 | ccaHCCPMemChanSwitchIpAddrType | 0 | 0 | The type of internet address of ccaHCCPMemChanSwitchIpAddress. |
1.3.6.1.4.1.9.9.242.1.1.6.1.4 | ccaHCCPMemChanSwitchIpAddress | 0 | 0 | The Ipv4 Address of channel switch. It represents the IP address of the upconverter that this Working member connects to if ccaHC… |
1.3.6.1.4.1.9.9.242.1.1.6.1.5 | ccaHCCPMemChanSwitchModule | 0 | 0 | The module number of channel switch for this member . It is the module number on the upconverter that this member connects to if … |
1.3.6.1.4.1.9.9.242.1.1.6.1.6 | ccaHCCPMemChanSwitchProtIpAddrType | 0 | 0 | The type of internet address of ccaHCCPMemChanSwitchProtIpAddr. |
1.3.6.1.4.1.9.9.242.1.1.6.1.7 | ccaHCCPMemChanSwitchProtIpAddr | 0 | 0 | The IP address of the Wavecom upconvertor that is connected to the corresponding Protect for this Working member. This object is m… |
1.3.6.1.4.1.9.9.242.1.1.6.1.8 | ccaHCCPMemChanSwitchProtModule | 0 | 0 | The module number on the Wavecom upconvertor that is connected to the corresponding Protect for this Working member. This object i… |
1.3.6.1.4.1.9.9.242.1.1.6.1.9 | ccaHCCPMemChanSwitchPosition | 0 | 0 | The position within a switch module for this Working member. This object is valid for ccaHCCPMemChanSwitchType rfSwitchGrp(3) and… |