Reference record for OID 1.3.6.1.4.1.9.9.252.1.2.1

parent

1.3.6.1.4.1.9.9.252.1.2 (cTapStreamGroup)

node code

1

node name

cTapStreamCapabilities

dot oid

1.3.6.1.4.1.9.9.252.1.2.1

type

OBJECT-TYPE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) cTapMIB(252) cTapMIBObjects(1) cTapStreamGroup(2) cTapStreamCapabilities(1)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) cTapMIB(252) cTapMIBObjects(1) cTapStreamGroup(2) cTapStreamCapabilities(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) cTapMIB(252) cTapMIBObjects(1) cTapStreamGroup(2) cTapStreamCapabilities(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) cTapMIB(252) cTapMIBObjects(1) cTapStreamGroup(2) cTapStreamCapabilities(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) cTapMIB(252) cTapMIBObjects(1) cTapStreamGroup(2) cTapStreamCapabilities(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) cTapMIB(252) cTapMIBObjects(1) cTapStreamGroup(2) cTapStreamCapabilities(1)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/cTapMIB/cTapMIBObjects/cTapStreamGroup/cTapStreamCapabilities

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/cTapMIB/cTapMIBObjects/cTapStreamGroup/cTapStreamCapabilities

/iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/cTapMIB/cTapMIBObjects/cTapStreamGroup/cTapStreamCapabilities

/iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/cTapMIB/cTapMIBObjects/cTapStreamGroup/cTapStreamCapabilities

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/cTapMIB/cTapMIBObjects/cTapStreamGroup/cTapStreamCapabilities

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/cTapMIB/cTapMIBObjects/cTapStreamGroup/cTapStreamCapabilities

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/9/9/252/1/2/1

Description by cisco_v1

This object displays what types of intercept streams can be
configured on this type of device. This may be dependent on
hardware capabilities, software capabilities. The following
fields may be supported:
interface: SNMP ifIndex Value may be used to select
interception of all data crossing an
interface or set of interfaces.
tapEnable: set if table entries with
cTapStreamIpInterceptEnable set to 'false'
are used to pre-screen packets for intercept;
otherwise these entries are ignored.
ipV4: IPv4 Address or prefix may be used to select
traffic to be intercepted.
ipV6: IPv6 Address or prefix may be used to select
traffic to be intercepted.
l4Port: TCP/UDP Ports may be used to select traffic
to be intercepted.
dscp: DSCP may be used to select traffic to be
intercepted.
dstMacAddr: Destination MAC Address may be used to select
traffic to be intercepted.
srcMacAddr: Source MAC Address may be used to select
traffic to be intercepted.
ethernetPid: Ethernet Protocol Identifier may be used to
select traffic to be intercepted.
dstLlcSap: IEEE 802.2 Destination SAP may be used to
select traffic to be intercepted.
srcLlcSap: IEEE 802.2 Source SAP may be used to select
traffic to be intercepted.

Description by mibdepot

This object displays what types of intercept streams can be
configured on this type of device. This may be dependent on
hardware capabilities, software capabilities. The following
fields may be supported:
interface: SNMP ifIndex Value may be used to select
interception of all data crossing an
interface or set of interfaces.
tapEnable: set if table entries with
cTapStreamIpInterceptEnable set to 'false'
are used to pre-screen packets for intercept;
otherwise these entries are ignored.
ipV4: IPv4 Address or prefix may be used to select
traffic to be intercepted.
ipV6: IPv6 Address or prefix may be used to select
traffic to be intercepted.
l4Port: TCP/UDP Ports may be used to select traffic
to be intercepted.
dscp: DSCP may be used to select traffic to be
intercepted.
dstMacAddr: Destination MAC Address may be used to select
traffic to be intercepted.
srcMacAddr: Source MAC Address may be used to select
traffic to be intercepted.
ethernetPid: Ethernet Protocol Identifier may be used to
select traffic to be intercepted.
dstLlcSap: IEEE 802.2 Destination SAP may be used to
select traffic to be intercepted.
srcLlcSap: IEEE 802.2 Source SAP may be used to select
traffic to be intercepted.

Parsed from file CISCO-TAP-MIB.my.txt
Company: None
Module: CISCO-TAP-MIB

Description by circitor

This object displays what types of intercept streams can be
configured on this type of device. This may be dependent on
hardware capabilities, software capabilities. The following
fields may be supported:
interface: SNMP ifIndex Value may be used to select
interception of all data crossing an
interface or set of interfaces.
tapEnable: set if table entries with
cTapStreamIpInterceptEnable set to 'false'
are used to pre-screen packets for intercept;
otherwise these entries are ignored.
ipV4: IPv4 Address or prefix may be used to select
traffic to be intercepted.
ipV6: IPv6 Address or prefix may be used to select
traffic to be intercepted.
l4Port: TCP/UDP Ports may be used to select traffic
to be intercepted.
dscp: DSCP may be used to select traffic to be
intercepted.
dstMacAddr: Destination MAC Address may be used to select
traffic to be intercepted.
srcMacAddr: Source MAC Address may be used to select
traffic to be intercepted.
ethernetPid: Ethernet Protocol Identifier may be used to
select traffic to be intercepted.
dstLlcSap: IEEE 802.2 Destination SAP may be used to
select traffic to be intercepted.
srcLlcSap: IEEE 802.2 Source SAP may be used to select
traffic to be intercepted.

Parsed from file CISCO-TAP-MIB.mib
Module: CISCO-TAP-MIB

Information by cisco_v1

cTapStreamCapabilities OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(1..2))
        
        
        
        
        
        
        
        
        
        
        
        
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object displays what types of intercept streams can be
        configured on this type of device. This may be dependent on
        hardware capabilities, software capabilities. The following
        fields may be supported:
            interface:   SNMP ifIndex Value may be used to select
                         interception of all data crossing an
                         interface or set of interfaces.
            tapEnable:   set if table entries with
                         cTapStreamIpInterceptEnable set to 'false'
                         are used to pre-screen packets for intercept;
                         otherwise these entries are ignored.
            ipV4:        IPv4 Address or prefix may be used to select
                         traffic to be intercepted.
            ipV6:        IPv6 Address or prefix may be used to select
                         traffic to be intercepted.
            l4Port:      TCP/UDP Ports may be used to select traffic
                         to be intercepted.
            dscp:        DSCP may be used to select traffic to be
                         intercepted.
            dstMacAddr:  Destination MAC Address may be used to select
                         traffic to be intercepted.
            srcMacAddr:  Source MAC Address may be used to select
                         traffic to be intercepted.
            ethernetPid: Ethernet Protocol Identifier may be used to
                         select traffic to be intercepted.
            dstLlcSap:   IEEE 802.2 Destination SAP may be used to
                         select traffic to be intercepted.
            srcLlcSap:   IEEE 802.2 Source SAP may be used to select
                         traffic to be intercepted."
    ::= { cTapStreamGroup 1 }

Information by oid_info

Vendor: Cisco
Module: CISCO-TAP-MIB

[Automatically extracted from oidview.com]

Information by mibdepot

cTapStreamCapabilities  OBJECT-TYPE
     SYNTAX     BITS {
                         tapEnable(0),
                         interface(1),
                         ipV4(2),
                         ipV6(3),
                         l4Port(4),
                         dscp(5),
                         dstMacAddr(6),
                         srcMacAddr(7),
                         ethernetPid(8),
                         dstLlcSap(9),
                         srcLlcSap(10)
                     }
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "This object displays what types of intercept streams can be
         configured on this type of device. This may be dependent on
         hardware capabilities, software capabilities. The following
         fields may be supported:
             interface:   SNMP ifIndex Value may be used to select
                          interception of all data crossing an
                          interface or set of interfaces.
             tapEnable:   set if table entries with
                          cTapStreamIpInterceptEnable set to 'false'
                          are used to pre-screen packets for intercept;
                          otherwise these entries are ignored.
             ipV4:        IPv4 Address or prefix may be used to select
                          traffic to be intercepted.
             ipV6:        IPv6 Address or prefix may be used to select
                          traffic to be intercepted.
             l4Port:      TCP/UDP Ports may be used to select traffic
                          to be intercepted.
             dscp:        DSCP may be used to select traffic to be
                          intercepted.
             dstMacAddr:  Destination MAC Address may be used to select
                          traffic to be intercepted.
             srcMacAddr:  Source MAC Address may be used to select
                          traffic to be intercepted.
             ethernetPid: Ethernet Protocol Identifier may be used to
                          select traffic to be intercepted.
             dstLlcSap:   IEEE 802.2 Destination SAP may be used to
                          select traffic to be intercepted.
             srcLlcSap:   IEEE 802.2 Source SAP may be used to select
                          traffic to be intercepted."
     ::= { cTapStreamGroup 1 }

Information by circitor

cTapStreamCapabilities  OBJECT-TYPE
     SYNTAX     BITS {
                         tapEnable(0),
                         interface(1),
                         ipV4(2),
                         ipV6(3),
                         l4Port(4),
                         dscp(5),
                         dstMacAddr(6),
                         srcMacAddr(7),
                         ethernetPid(8),
                         dstLlcSap(9),
                         srcLlcSap(10)
                     }
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "This object displays what types of intercept streams can be
         configured on this type of device. This may be dependent on
         hardware capabilities, software capabilities. The following
         fields may be supported:
             interface:   SNMP ifIndex Value may be used to select
                          interception of all data crossing an
                          interface or set of interfaces.
             tapEnable:   set if table entries with
                          cTapStreamIpInterceptEnable set to 'false'
                          are used to pre-screen packets for intercept;
                          otherwise these entries are ignored.
             ipV4:        IPv4 Address or prefix may be used to select
                          traffic to be intercepted.
             ipV6:        IPv6 Address or prefix may be used to select
                          traffic to be intercepted.
             l4Port:      TCP/UDP Ports may be used to select traffic
                          to be intercepted.
             dscp:        DSCP may be used to select traffic to be
                          intercepted.
             dstMacAddr:  Destination MAC Address may be used to select
                          traffic to be intercepted.
             srcMacAddr:  Source MAC Address may be used to select
                          traffic to be intercepted.
             ethernetPid: Ethernet Protocol Identifier may be used to
                          select traffic to be intercepted.
             dstLlcSap:   IEEE 802.2 Destination SAP may be used to
                          select traffic to be intercepted.
             srcLlcSap:   IEEE 802.2 Source SAP may be used to select
                          traffic to be intercepted."
     ::= { cTapStreamGroup 1 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Children (1)

Brothers (2)