This object represents the probe priority.
The priority value is in the decreasing order
of the actual priority, i.e., lower the value
higher the priority.
Probes associated with critical services can be
configured with highest priority such that the
results of these probes can be used to trigger
a state change in configuration.
Parsed from file CISCO-SLB-HEALTH-MON-MIB.mib
Module: CISCO-SLB-HEALTH-MON-MIB
This object represents the probe priority.
The priority value is in the decreasing order
of the actual priority, i.e., lower the value
higher the priority.
Probes associated with critical services can be
configured with highest priority such that the
results of these probes can be used to trigger
a state change in configuration.
This object represents the probe priority.
The priority value is in the decreasing order
of the actual priority, i.e., lower the value
higher the priority.
Probes associated with critical services can be
configured with highest priority such that the
results of these probes can be used to trigger
a state change in configuration.
Parsed from file CISCO-SLB-HEALTH-MON-MIB.my.txt
Company: None
Module: CISCO-SLB-HEALTH-MON-MIB
This object represents the probe priority.
The priority value is in the decreasing order
of the actual priority, i.e., lower the value
higher the priority.
Probes associated with critical services can be
configured with highest priority such that the
results of these probes can be used to trigger
a state change in configuration.
cslbxProbePriority OBJECT-TYPE SYNTAX Unsigned32 (0..255 ) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the probe priority. The priority value is in the decreasing order of the actual priority, i.e., lower the value higher the priority. Probes associated with critical services can be configured with highest priority such that the results of these probes can be used to trigger a state change in configuration." DEFVAL { 2 } ::= { cslbxProbeCfgEntry 21 }
cslbxProbePriority OBJECT-TYPE SYNTAX Gauge(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This object represents the probe priority. The priority value is in the decreasing order of the actual priority, i.e., lower the value higher the priority. Probes associated with critical services can be configured with highest priority such that the results of these probes can be used to trigger a state change in configuration." DEFVAL { 2 } ::= { cslbxProbeCfgEntry 21 }
Vendor: Cisco
Module: CISCO-SLB-HEALTH-MON-MIB
[Automatically extracted from oidview.com]
cslbxProbePriority OBJECT-TYPE SYNTAX Unsigned32 (0..255 ) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the probe priority. The priority value is in the decreasing order of the actual priority, i.e., lower the value higher the priority. Probes associated with critical services can be configured with highest priority such that the results of these probes can be used to trigger a state change in configuration." DEFVAL { 2 } ::= { cslbxProbeCfgEntry 21 }
cslbxProbePriority OBJECT-TYPE SYNTAX Unsigned32 (0..255 ) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the probe priority. The priority value is in the decreasing order of the actual priority, i.e., lower the value higher the priority. Probes associated with critical services can be configured with highest priority such that the results of these probes can be used to trigger a state change in configuration." DEFVAL { 2 } ::= { cslbxProbeCfgEntry 21 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.254.1.6.1.1.1 | cslbxProbeName | 0 | 0 | The name of the probe. |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.2 | cslbxProbeType | 0 | 0 | The type of probe. |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.3 | cslbxProbeInterval | 0 | 0 | Time between health checks. It is from the end of previous check to the beginning of the next check. |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.4 | cslbxProbeRetries | 0 | 0 | The number of consecutive retries without a successful probe before marking the real server as 'failed'. |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.5 | cslbxProbeFailedInterval | 0 | 0 | Time before retrying a 'failed' real server to see if it has recovered yet. |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.6 | cslbxProbeReceiveTimeout | 0 | 0 | Maximum time to wait for a reply from a real server before considering this probe attempt to have failed. |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.7 | cslbxProbeTcpOpenTimeout | 0 | 0 | Maximum time to wait for a TCP SYN/ACK frame from the real server. This entry is only valid for probes employing TCP, such as SM… |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.8 | cslbxProbeAlternateDestAddrType | 0 | 0 | The type of address stored in cslbxProbeAlternateDestAddr. |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.9 | cslbxProbeAlternateDestAddr | 0 | 0 | The alternative destination IP address to be used with the probing packet. Probe frames are normally sent to a real server IP ad… |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.10 | cslbxProbeDnsDomainName | 0 | 0 | The domain name string use with the DNS probe. (Only applicable to DNS probes.) |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.11 | cslbxProbeHttpRequestMethod | 0 | 0 | The request method type string to be used in the HTTP probe packets. (Only applicable to HTTP probes.) |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.12 | cslbxProbeHttpRequestUrl | 0 | 0 | The URI string in the HTTP request of HTTP probe packets. (Only applicable to HTTP probes.) |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.13 | cslbxProbeRowStatus | 0 | 0 | The row status is used by a management station to create or delete the row entry in cslbxProbeCfgTable following the RowStatus te… |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.14 | cslbxProbeScriptName | 0 | 0 | The name of the function to be executed. (Only applicable to scriptedProbe type.) |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.15 | cslbxProbeScriptArguments | 0 | 0 | The argument parameters passed into the executable script. (Only applicable to scriptedProbe type.) |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.16 | cslbxProbePort | 0 | 0 | The port number to be used by the probe. The value of zero indicates the probe will use the default port number. The default por… |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.17 | cslbxProbeDescription | 0 | 0 | This object is used for configuring the description of the probe. |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.18 | cslbxProbeRouteMethod | 0 | 0 | This object specifies whether the probe destined to IP address specified in cslbxProbeAlternateDestAddr be routed using internal … |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.19 | cslbxProbeProtocolType | 0 | 0 | This object is used for configuring the transport layer protocol to send probe messages. The possible value(s) are : other: values … |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.20 | cslbxProbePassCount | 0 | 0 | This object specifies the number of successful probe responses that should be received before declaring a failed real server as p… |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.22 | cslbxProbeUserName | 0 | 0 | This object represents the user name required for authentication. This object is applicable for following value of 'cslbxProbeTy… |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.23 | cslbxProbePassword | 0 | 0 | This object represents the password required for authentication. This object is applicable for following value of 'cslbxProbeType… |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.24 | cslbxProbeConnTermination | 0 | 0 | This object specifies how the connections need to be terminated. The possible value(s) are : graceful : follow graceful handsha… |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.25 | cslbxProbeSocketReuse | 0 | 0 | This object specifies whether to reuse the socket or not for the connection oriented probes. If set to 'true' same socket is re-u… |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.26 | cslbxProbeSendDataType | 0 | 0 | This object represents the data to be sent for the appropriate probes. The possible value(s) are: ascii : ASCII data binary : bina… |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.27 | cslbxProbeSendData | 0 | 0 | This object represents the data to be sent for the appropriate probes. This object is applicable for following value(s) of cslbxPr… |
| 1.3.6.1.4.1.9.9.254.1.6.1.1.28 | cslbxProbeState | 0 | 0 | This object represents the state of the probe. When the probe is associated with a real server or server farm it will be active w… |