Rate limit for incoming IGMP messages in packets per seconds,
applied to each VLAN in the system. IGMP Snooping will be
disabled on the corresponding VLAN if IGMP message incoming
rate exceeds the limit, then enabled back automatically once
IGMP join message rate is below the limit indicated by the
corresponding instance value of this object. Setting value
zero to this object means no limitation on IGMP incoming
message rate.
Parsed from file CISCO-IGMP-SNOOPING-MIB.mib
Module: CISCO-IGMP-SNOOPING-MIB
Rate limit for incoming IGMP messages in packets per seconds,
applied to each VLAN in the system. IGMP Snooping will be
disabled on the corresponding VLAN if IGMP message incoming
rate exceeds the limit, then enabled back automatically once
IGMP join message rate is below the limit indicated by the
corresponding instance value of this object. Setting value
zero to this object means no limitation on IGMP incoming
message rate.
Rate limit for incoming IGMP messages in packets per seconds,
applied to each VLAN in the system. IGMP Snooping will be
disabled on the corresponding VLAN if IGMP message incoming
rate exceeds the limit, then enabled back automatically once
IGMP join message rate is below the limit indicated by the
corresponding instance value of this object. Setting value
zero to this object means no limitation on IGMP incoming
message rate.
Parsed from file CISCO-IGMP-SNOOPING-MIB.my.txt
Company: None
Module: CISCO-IGMP-SNOOPING-MIB
Rate limit for incoming IGMP messages in packets per seconds,
applied to each VLAN in the system. IGMP Snooping will be
disabled on the corresponding VLAN if IGMP message incoming
rate exceeds the limit, then enabled back automatically once
IGMP join message rate is below the limit indicated by the
corresponding instance value of this object. Setting value
zero to this object means no limitation on IGMP incoming
message rate.
cisRateLimit OBJECT-TYPE SYNTAX Unsigned32 UNITS "packets per second" MAX-ACCESS read-write STATUS current DESCRIPTION "Rate limit for incoming IGMP messages in packets per seconds, applied to each VLAN in the system. IGMP Snooping will be disabled on the corresponding VLAN if IGMP message incoming rate exceeds the limit, then enabled back automatically once IGMP join message rate is below the limit indicated by the corresponding instance value of this object. Setting value zero to this object means no limitation on IGMP incoming message rate." ::= { cisRateLimitInfo 6 }
cisRateLimit OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "Rate limit for incoming IGMP messages in packets per seconds, applied to each VLAN in the system. IGMP Snooping will be disabled on the corresponding VLAN if IGMP message incoming rate exceeds the limit, then enabled back automatically once IGMP join message rate is below the limit indicated by the corresponding instance value of this object. Setting value zero to this object means no limitation on IGMP incoming message rate." ::= { cisRateLimitInfo 6 }
Vendor: Cisco
Module: CISCO-IGMP-SNOOPING-MIB
[Automatically extracted from oidview.com]
cisRateLimit OBJECT-TYPE SYNTAX Unsigned32 UNITS "packets per second" MAX-ACCESS read-write STATUS current DESCRIPTION "Rate limit for incoming IGMP messages in packets per seconds, applied to each VLAN in the system. IGMP Snooping will be disabled on the corresponding VLAN if IGMP message incoming rate exceeds the limit, then enabled back automatically once IGMP join message rate is below the limit indicated by the corresponding instance value of this object. Setting value zero to this object means no limitation on IGMP incoming message rate." ::= { cisRateLimitInfo 6 }
cisRateLimit OBJECT-TYPE SYNTAX Unsigned32 UNITS "packets per second" MAX-ACCESS read-write STATUS current DESCRIPTION "Rate limit for incoming IGMP messages in packets per seconds, applied to each VLAN in the system. IGMP Snooping will be disabled on the corresponding VLAN if IGMP message incoming rate exceeds the limit, then enabled back automatically once IGMP join message rate is below the limit indicated by the corresponding instance value of this object. Setting value zero to this object means no limitation on IGMP incoming message rate." ::= { cisRateLimitInfo 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.263.1.3.6.0 | cisRateLimit | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.263.1.3.1 | cisGeneralQueryRateLimit | 1 | 1 | Rate limit for General-Query packets per 30 seconds from a control plane address. If the packets exceed the rate, snooping will b… |
| 1.3.6.1.4.1.9.9.263.1.3.2 | cisDvmrpRateLimit | 1 | 1 | Rate limit for DVMRP packets per 30 seconds from a control plane address. If the packets exceed the rate, snooping will be stalle… |
| 1.3.6.1.4.1.9.9.263.1.3.3 | cisMospf1RateLimit | 1 | 1 | Rate limit for MOSPF1 packets per 30 seconds from a control plane address. If the packets exceed the rate, snooping will be stall… |
| 1.3.6.1.4.1.9.9.263.1.3.4 | cisMospf2RateLimit | 1 | 1 | Rate limit for MOSPF2 packets per 30 seconds from a control plane address. If the packets exceed the rate, snooping will be stall… |
| 1.3.6.1.4.1.9.9.263.1.3.5 | cisPimV2RateLimit | 1 | 1 | Rate limit for PIMv2 packets per 30 seconds from a control plane address. If the packets exceed the rate, snooping will be stalle… |