The state of FSPF's 'neighbor state machine', which is
the operational state of the interaction with the
neighbor's interface which is connected to this interface.
If the 'fspfIfAdminStatus' is down(2), then this object
should be down (1). If the 'fspfIfAdminStatus' is up (2)
then this object should be take any of the possible values
depending on the state of FSPF's 'neighbor state machine'
on this interface on this VSAN.
Parsed from file CISCO-FSPF-MIB.mib
Module: CISCO-FSPF-MIB
The state of FSPF's 'neighbor state machine', which is
the operational state of the interaction with the
neighbor's interface which is connected to this interface.
If the 'fspfIfAdminStatus' is down(2), then this object
should be down (1). If the 'fspfIfAdminStatus' is up (2)
then this object should be take any of the possible values
depending on the state of FSPF's 'neighbor state machine'
on this interface on this VSAN.
The state of FSPF's 'neighbor state machine', which is
the operational state of the interaction with the
neighbor's interface which is connected to this interface.
If the 'fspfIfAdminStatus' is down(2), then this object
should be down (1). If the 'fspfIfAdminStatus' is up (2)
then this object should be take any of the possible values
depending on the state of FSPF's 'neighbor state machine'
on this interface on this VSAN.
Parsed from file CISCO-FSPF-MIB.my.txt
Company: None
Module: CISCO-FSPF-MIB
The state of FSPF's 'neighbor state machine', which is
the operational state of the interaction with the
neighbor's interface which is connected to this interface.
If the 'fspfIfAdminStatus' is down(2), then this object
should be down (1). If the 'fspfIfAdminStatus' is up (2)
then this object should be take any of the possible values
depending on the state of FSPF's 'neighbor state machine'
on this interface on this VSAN.
fspfIfNbrState OBJECT-TYPE SYNTAX FspfInterfaceState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of FSPF's 'neighbor state machine', which is the operational state of the interaction with the neighbor's interface which is connected to this interface. If the 'fspfIfAdminStatus' is down(2), then this object should be down (1). If the 'fspfIfAdminStatus' is up (2) then this object should be take any of the possible values depending on the state of FSPF's 'neighbor state machine' on this interface on this VSAN." REFERENCE "FC-SW-2 Rev 5.3, Section 8.7 Neighbor Finite State Machine" ::= { fspfIfEntry 14 }
fspfIfNbrState OBJECT-TYPE SYNTAX FspfInterfaceState ACCESS read-only STATUS mandatory DESCRIPTION "The state of FSPF's 'neighbor state machine', which is the operational state of the interaction with the neighbor's interface which is connected to this interface. If the 'fspfIfAdminStatus' is down(2), then this object should be down (1). If the 'fspfIfAdminStatus' is up (2) then this object should be take any of the possible values depending on the state of FSPF's 'neighbor state machine' on this interface on this VSAN." REFERENCE "FC-SW-2 Rev 5.3, Section 8.7 Neighbor Finite State Machine" ::= { fspfIfEntry 14 }
Vendor: Cisco
Module: CISCO-FSPF-MIB
[Automatically extracted from oidview.com]
fspfIfNbrState OBJECT-TYPE SYNTAX FspfInterfaceState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of FSPF's 'neighbor state machine', which is the operational state of the interaction with the neighbor's interface which is connected to this interface. If the 'fspfIfAdminStatus' is down(2), then this object should be down (1). If the 'fspfIfAdminStatus' is up (2) then this object should be take any of the possible values depending on the state of FSPF's 'neighbor state machine' on this interface on this VSAN." REFERENCE "FC-SW-2 Rev 5.3, Section 8.7 Neighbor Finite State Machine" ::= { fspfIfEntry 14 }
fspfIfNbrState OBJECT-TYPE SYNTAX FspfInterfaceState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of FSPF's 'neighbor state machine', which is the operational state of the interaction with the neighbor's interface which is connected to this interface. If the 'fspfIfAdminStatus' is down(2), then this object should be down (1). If the 'fspfIfAdminStatus' is up (2) then this object should be take any of the possible values depending on the state of FSPF's 'neighbor state machine' on this interface on this VSAN." REFERENCE "FC-SW-2 Rev 5.3, Section 8.7 Neighbor Finite State Machine" ::= { fspfIfEntry 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.287.1.2.1.1 | fspfIfCost | 0 | 0 | The administrative cost of sending a frame on this interface on this VSAN. The value 0 means that the cost has not been configur… |
1.3.6.1.4.1.9.9.287.1.2.1.2 | fspfIfHelloInterval | 0 | 0 | Interval between the periodic HELLO messages sent on this interface on this VSAN to verify the link health. Note that this value … |
1.3.6.1.4.1.9.9.287.1.2.1.3 | fspfIfDeadInterval | 0 | 0 | Maximum time for which no HELLO messages can be received on this interface on this VSAN. After this time, the interface is assume… |
1.3.6.1.4.1.9.9.287.1.2.1.4 | fspfIfRetransmitInterval | 0 | 0 | Time after which an unacknowledged link update is retransmitted on this interface on this VSAN. |
1.3.6.1.4.1.9.9.287.1.2.1.5 | fspfIfLsuRxPkts | 0 | 0 | Number of Link State Update (LSU) packets received on this interface on this VSAN since the creation of the entry. |
1.3.6.1.4.1.9.9.287.1.2.1.6 | fspfIfLsaRxPkts | 0 | 0 | Number of Link State Acknowledgement (LSA) packets received on this interface on this VSAN since the creation of the entry. |
1.3.6.1.4.1.9.9.287.1.2.1.7 | fspfIfLsuTxPkts | 0 | 0 | Number of Link State Update (LSU) packets transmitted on this interface on this VSAN since the creation of the entry. |
1.3.6.1.4.1.9.9.287.1.2.1.8 | fspfIfLsaTxPkts | 0 | 0 | Number of Link State Acknowledgement (LSA) packets transmitted on this interface on this VSAN since the creation of the entry. |
1.3.6.1.4.1.9.9.287.1.2.1.9 | fspfIfHelloTxPkts | 0 | 0 | Number of HELLO packets transmitted on this interface on this VSAN since the creation of the entry. |
1.3.6.1.4.1.9.9.287.1.2.1.10 | fspfIfHelloRxPkts | 0 | 0 | Number of HELLO packets received on this interface on this VSAN since the creation of the entry. |
1.3.6.1.4.1.9.9.287.1.2.1.11 | fspfIfRetransmittedLsuTxPkts | 0 | 0 | Number of LSU packets retransmitted on this interface on this VSAN since the creation of the entry. |
1.3.6.1.4.1.9.9.287.1.2.1.12 | fspfIfErrorRxPkts | 0 | 0 | Number of invalid FSPF control packets received on this interface on this VSAN since the creation of the entry. |
1.3.6.1.4.1.9.9.287.1.2.1.13 | fspfIfInactivityExpirations | 0 | 0 | Number of times the inactivity timer has expired on this interface on this VSAN since the creation of the entry. |
1.3.6.1.4.1.9.9.287.1.2.1.15 | fspfIfNbrDomainId | 0 | 0 | The Domain Id of the neighbor on this VSAN. |
1.3.6.1.4.1.9.9.287.1.2.1.16 | fspfIfNbrPortIndex | 0 | 0 | The index, as known by the neighbor, of the neighbor's interface which is connected to this interface on this VSAN. |
1.3.6.1.4.1.9.9.287.1.2.1.17 | fspfIfAdminStatus | 0 | 0 | The desired state of FSPF on this interface on this VSAN. If value of this object is set to 'up', then FSPF is enabled on this in… |
1.3.6.1.4.1.9.9.287.1.2.1.18 | fspfIfCreateTime | 0 | 0 | The value of sysUpTime when this entry was last created. |
1.3.6.1.4.1.9.9.287.1.2.1.19 | fspfIfSetToDefault | 0 | 0 | Setting this value to 'default' changes the value of each and every every write-able object in this row to its default value. If … |
1.3.6.1.4.1.9.9.287.1.2.1.20 | fspfIfRowStatus | 0 | 0 | The status of the conceptual row. This object can be used to create an entry only if the corresponding VSAN is suspended and the … |