This object is used to facilitate modification
of fcsVsanDiscoveryList2k, fcsVsanDiscovery-
List4k, fcsVsanDiscoveryName and
fcsStartDiscovery objects by multiple managers.
The procedure for modifying the above four objects
is as follows:
1. Determine new values for fcsVsanDiscoveryList2k,
fcsVsanDiscoveryList4k and fcsVsanDiscoveryName.
2. Retrieve the value of fcsVsanDiscoverySpinLock.
3. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value, and (in the same PDU) the value
of fcsVsanDiscoveryList2k to the new value.
If the set fails for the fcsVsanDiscoverySpinLock
object, go back to step 2.
4. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value incremented by one, and (in the
same PDU) the value of fcsVsanDiscoveryList4k
to its new value. If the set fails for
fcsVsanDiscoverySpinLock, go back to step 2.
5. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value incremented by two, and (in the
same PDU) the value of fcsStartDiscovery to
'startDiscovery'. If the set fails for
fcsVsanDiscoverySpinLock, go back to step 2.
6. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value incremented by three, and (in the
same PDU) the value of fcsVsanDiscoveryName to
its new value. If the set fails for
fcsVsanDiscoverySpinLock, go back to step 2.
Note that if it's possible to include
fcsVsanDiscoveryList4k, fcsStartDiscovery,
and/or fcsVsanDiscoveryName in the (Set Request)
PDU of an earlier step, then step 4, 5 and/or 6,
respectively , can be eliminated.
Parsed from file CISCO-FCS-MIB.mib
Module: CISCO-FCS-MIB
This object is used to facilitate modification
of fcsVsanDiscoveryList2k, fcsVsanDiscovery-
List4k, fcsVsanDiscoveryName and
fcsStartDiscovery objects by multiple managers.
The procedure for modifying the above four objects
is as follows:
1. Determine new values for fcsVsanDiscoveryList2k,
fcsVsanDiscoveryList4k and fcsVsanDiscoveryName.
2. Retrieve the value of fcsVsanDiscoverySpinLock.
3. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value, and (in the same PDU) the value
of fcsVsanDiscoveryList2k to the new value.
If the set fails for the fcsVsanDiscoverySpinLock
object, go back to step 2.
4. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value incremented by one, and (in the
same PDU) the value of fcsVsanDiscoveryList4k
to its new value. If the set fails for
fcsVsanDiscoverySpinLock, go back to step 2.
5. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value incremented by two, and (in the
same PDU) the value of fcsStartDiscovery to
'startDiscovery'. If the set fails for
fcsVsanDiscoverySpinLock, go back to step 2.
6. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value incremented by three, and (in the
same PDU) the value of fcsVsanDiscoveryName to
its new value. If the set fails for
fcsVsanDiscoverySpinLock, go back to step 2.
Note that if it's possible to include
fcsVsanDiscoveryList4k, fcsStartDiscovery,
and/or fcsVsanDiscoveryName in the (Set Request)
PDU of an earlier step, then step 4, 5 and/or 6,
respectively , can be eliminated.
This object is used to facilitate modification
of fcsVsanDiscoveryList2k, fcsVsanDiscovery-
List4k, fcsVsanDiscoveryName and
fcsStartDiscovery objects by multiple managers.
The procedure for modifying the above four objects
is as follows:
1. Determine new values for fcsVsanDiscoveryList2k,
fcsVsanDiscoveryList4k and fcsVsanDiscoveryName.
2. Retrieve the value of fcsVsanDiscoverySpinLock.
3. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value, and (in the same PDU) the value
of fcsVsanDiscoveryList2k to the new value.
If the set fails for the fcsVsanDiscoverySpinLock
object, go back to step 2.
4. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value incremented by one, and (in the
same PDU) the value of fcsVsanDiscoveryList4k
to its new value. If the set fails for
fcsVsanDiscoverySpinLock, go back to step 2.
5. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value incremented by two, and (in the
same PDU) the value of fcsStartDiscovery to
'startDiscovery'. If the set fails for
fcsVsanDiscoverySpinLock, go back to step 2.
6. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value incremented by three, and (in the
same PDU) the value of fcsVsanDiscoveryName to
its new value. If the set fails for
fcsVsanDiscoverySpinLock, go back to step 2.
Note that if it's possible to include
fcsVsanDiscoveryList4k, fcsStartDiscovery,
and/or fcsVsanDiscoveryName in the (Set Request)
PDU of an earlier step, then step 4, 5 and/or 6,
respectively , can be eliminated.
Parsed from file CISCO-FCS-MIB.my.txt
Company: None
Module: CISCO-FCS-MIB
This object is used to facilitate modification
of fcsVsanDiscoveryList2k, fcsVsanDiscovery-
List4k, fcsVsanDiscoveryName and
fcsStartDiscovery objects by multiple managers.
The procedure for modifying the above four objects
is as follows:
1. Determine new values for fcsVsanDiscoveryList2k,
fcsVsanDiscoveryList4k and fcsVsanDiscoveryName.
2. Retrieve the value of fcsVsanDiscoverySpinLock.
3. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value, and (in the same PDU) the value
of fcsVsanDiscoveryList2k to the new value.
If the set fails for the fcsVsanDiscoverySpinLock
object, go back to step 2.
4. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value incremented by one, and (in the
same PDU) the value of fcsVsanDiscoveryList4k
to its new value. If the set fails for
fcsVsanDiscoverySpinLock, go back to step 2.
5. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value incremented by two, and (in the
same PDU) the value of fcsStartDiscovery to
'startDiscovery'. If the set fails for
fcsVsanDiscoverySpinLock, go back to step 2.
6. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value incremented by three, and (in the
same PDU) the value of fcsVsanDiscoveryName to
its new value. If the set fails for
fcsVsanDiscoverySpinLock, go back to step 2.
Note that if it's possible to include
fcsVsanDiscoveryList4k, fcsStartDiscovery,
and/or fcsVsanDiscoveryName in the (Set Request)
PDU of an earlier step, then step 4, 5 and/or 6,
respectively , can be eliminated.
fcsVsanDiscoverySpinLock OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to facilitate modification of fcsVsanDiscoveryList2k, fcsVsanDiscovery- List4k, fcsVsanDiscoveryName and fcsStartDiscovery objects by multiple managers. The procedure for modifying the above four objects is as follows: 1. Determine new values for fcsVsanDiscoveryList2k, fcsVsanDiscoveryList4k and fcsVsanDiscoveryName. 2. Retrieve the value of fcsVsanDiscoverySpinLock. 3. Set the value of fcsVsanDiscoverySpinLock to the retrieved value, and (in the same PDU) the value of fcsVsanDiscoveryList2k to the new value. If the set fails for the fcsVsanDiscoverySpinLock object, go back to step 2. 4. Set the value of fcsVsanDiscoverySpinLock to the retrieved value incremented by one, and (in the same PDU) the value of fcsVsanDiscoveryList4k to its new value. If the set fails for fcsVsanDiscoverySpinLock, go back to step 2. 5. Set the value of fcsVsanDiscoverySpinLock to the retrieved value incremented by two, and (in the same PDU) the value of fcsStartDiscovery to 'startDiscovery'. If the set fails for fcsVsanDiscoverySpinLock, go back to step 2. 6. Set the value of fcsVsanDiscoverySpinLock to the retrieved value incremented by three, and (in the same PDU) the value of fcsVsanDiscoveryName to its new value. If the set fails for fcsVsanDiscoverySpinLock, go back to step 2. Note that if it's possible to include fcsVsanDiscoveryList4k, fcsStartDiscovery, and/or fcsVsanDiscoveryName in the (Set Request) PDU of an earlier step, then step 4, 5 and/or 6, respectively , can be eliminated." ::= { fcsConfiguration 1 }
fcsVsanDiscoverySpinLock OBJECT-TYPE SYNTAX TestAndIncr ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to facilitate modification of fcsVsanDiscoveryList2k, fcsVsanDiscovery- List4k, fcsVsanDiscoveryName and fcsStartDiscovery objects by multiple managers. The procedure for modifying the above four objects is as follows: 1. Determine new values for fcsVsanDiscoveryList2k, fcsVsanDiscoveryList4k and fcsVsanDiscoveryName. 2. Retrieve the value of fcsVsanDiscoverySpinLock. 3. Set the value of fcsVsanDiscoverySpinLock to the retrieved value, and (in the same PDU) the value of fcsVsanDiscoveryList2k to the new value. If the set fails for the fcsVsanDiscoverySpinLock object, go back to step 2. 4. Set the value of fcsVsanDiscoverySpinLock to the retrieved value incremented by one, and (in the same PDU) the value of fcsVsanDiscoveryList4k to its new value. If the set fails for fcsVsanDiscoverySpinLock, go back to step 2. 5. Set the value of fcsVsanDiscoverySpinLock to the retrieved value incremented by two, and (in the same PDU) the value of fcsStartDiscovery to 'startDiscovery'. If the set fails for fcsVsanDiscoverySpinLock, go back to step 2. 6. Set the value of fcsVsanDiscoverySpinLock to the retrieved value incremented by three, and (in the same PDU) the value of fcsVsanDiscoveryName to its new value. If the set fails for fcsVsanDiscoverySpinLock, go back to step 2. Note that if it's possible to include fcsVsanDiscoveryList4k, fcsStartDiscovery, and/or fcsVsanDiscoveryName in the (Set Request) PDU of an earlier step, then step 4, 5 and/or 6, respectively , can be eliminated." ::= { fcsConfiguration 1 }
Vendor: Cisco
Module: CISCO-FCS-MIB
[Automatically extracted from oidview.com]
fcsVsanDiscoverySpinLock OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to facilitate modification of fcsVsanDiscoveryList2k, fcsVsanDiscovery- List4k, fcsVsanDiscoveryName and fcsStartDiscovery objects by multiple managers. The procedure for modifying the above four objects is as follows: 1. Determine new values for fcsVsanDiscoveryList2k, fcsVsanDiscoveryList4k and fcsVsanDiscoveryName. 2. Retrieve the value of fcsVsanDiscoverySpinLock. 3. Set the value of fcsVsanDiscoverySpinLock to the retrieved value, and (in the same PDU) the value of fcsVsanDiscoveryList2k to the new value. If the set fails for the fcsVsanDiscoverySpinLock object, go back to step 2. 4. Set the value of fcsVsanDiscoverySpinLock to the retrieved value incremented by one, and (in the same PDU) the value of fcsVsanDiscoveryList4k to its new value. If the set fails for fcsVsanDiscoverySpinLock, go back to step 2. 5. Set the value of fcsVsanDiscoverySpinLock to the retrieved value incremented by two, and (in the same PDU) the value of fcsStartDiscovery to 'startDiscovery'. If the set fails for fcsVsanDiscoverySpinLock, go back to step 2. 6. Set the value of fcsVsanDiscoverySpinLock to the retrieved value incremented by three, and (in the same PDU) the value of fcsVsanDiscoveryName to its new value. If the set fails for fcsVsanDiscoverySpinLock, go back to step 2. Note that if it's possible to include fcsVsanDiscoveryList4k, fcsStartDiscovery, and/or fcsVsanDiscoveryName in the (Set Request) PDU of an earlier step, then step 4, 5 and/or 6, respectively , can be eliminated." ::= { fcsConfiguration 1 }
fcsVsanDiscoverySpinLock OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to facilitate modification of fcsVsanDiscoveryList2k, fcsVsanDiscovery- List4k, fcsVsanDiscoveryName and fcsStartDiscovery objects by multiple managers. The procedure for modifying the above four objects is as follows: 1. Determine new values for fcsVsanDiscoveryList2k, fcsVsanDiscoveryList4k and fcsVsanDiscoveryName. 2. Retrieve the value of fcsVsanDiscoverySpinLock. 3. Set the value of fcsVsanDiscoverySpinLock to the retrieved value, and (in the same PDU) the value of fcsVsanDiscoveryList2k to the new value. If the set fails for the fcsVsanDiscoverySpinLock object, go back to step 2. 4. Set the value of fcsVsanDiscoverySpinLock to the retrieved value incremented by one, and (in the same PDU) the value of fcsVsanDiscoveryList4k to its new value. If the set fails for fcsVsanDiscoverySpinLock, go back to step 2. 5. Set the value of fcsVsanDiscoverySpinLock to the retrieved value incremented by two, and (in the same PDU) the value of fcsStartDiscovery to 'startDiscovery'. If the set fails for fcsVsanDiscoverySpinLock, go back to step 2. 6. Set the value of fcsVsanDiscoverySpinLock to the retrieved value incremented by three, and (in the same PDU) the value of fcsVsanDiscoveryName to its new value. If the set fails for fcsVsanDiscoverySpinLock, go back to step 2. Note that if it's possible to include fcsVsanDiscoveryList4k, fcsStartDiscovery, and/or fcsVsanDiscoveryName in the (Set Request) PDU of an earlier step, then step 4, 5 and/or 6, respectively , can be eliminated." ::= { fcsConfiguration 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.297.1.1.1.0 | fcsVsanDiscoverySpinLock | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.297.1.1.2 | fcsVsanDiscoveryName | 1 | 1 | The name of the discovery triggered by a manager. This object is sent along with the fcsDiscoveryCompleteNotify notification. This… |
| 1.3.6.1.4.1.9.9.297.1.1.3 | fcsVsanDiscoveryList2k | 1 | 1 | A bitmap which represents VSANs starting from VSAN id 1 to VSAN id 2048. Discovery will be carried out on all those VSANs for whi… |
| 1.3.6.1.4.1.9.9.297.1.1.4 | fcsVsanDiscoveryList4k | 1 | 1 | A bitmap which represents VSANs starting from VSAN id 2049 to VSAN id 4096. Discovery will be carried out on all those VSANs for … |
| 1.3.6.1.4.1.9.9.297.1.1.5 | fcsStartDiscovery | 1 | 1 | This object specifies whether a discovery cycle should be started by the Fabric Configuration Server. If this object is set to 's… |
| 1.3.6.1.4.1.9.9.297.1.1.6 | fcsDiscoveryStatusTable | 1 | 3 | This table contains the status of the discovery for all VSANs. |
| 1.3.6.1.4.1.9.9.297.1.1.7 | fcsVsanDiscoveryTimeOut | 1 | 1 | The minimum interval of time for which the discovered data on a VSAN is cached by the Fabric Configuration Server. |
| 1.3.6.1.4.1.9.9.297.1.1.8 | fcsDiscoveryInvalidateCache2k | 1 | 1 | A bitmap which represents VSANs from 1 to 2048. The discovered cache will be invalidated on those VSANs for which the correspondi… |
| 1.3.6.1.4.1.9.9.297.1.1.9 | fcsDiscoveryInvalidateCache4k | 1 | 1 | A bitmap which represents VSANs from 2049 to 4096. The discovered cache will be invalidated on those VSANs for which the correspo… |
| 1.3.6.1.4.1.9.9.297.1.1.10 | fcsIeNumber | 1 | 1 | The number of entries currently present in the fcsIeTable. |
| 1.3.6.1.4.1.9.9.297.1.1.11 | fcsIeTable | 1 | 10 | A table of Interconnect Elements. Interconnect Elements (IEs) are switches, hubs, bridges etc. By default, the Fabric Configuratio… |
| 1.3.6.1.4.1.9.9.297.1.1.12 | fcsMgmtAddrListTable | 1 | 6 | This table contains the set of management address lists currently referenced by any instance of the fcsIeMgmtAddrListIndex or fcsP… |
| 1.3.6.1.4.1.9.9.297.1.1.13 | fcsPortListTable | 1 | 2 | This table contains all the lists of ports that are associated with Interconnect Elements contained in fcsIeTable. |
| 1.3.6.1.4.1.9.9.297.1.1.14 | fcsPortNumber | 1 | 1 | The number of entries currently present in the fcsPortTable. |
| 1.3.6.1.4.1.9.9.297.1.1.15 | fcsPortTable | 1 | 8 | This table contains information of all the ports. These ports are grouped into lists by the fcsPortListTable. |
| 1.3.6.1.4.1.9.9.297.1.1.16 | fcsAttachPortNameListTable | 1 | 3 | This table contains all the lists of attach port names. |
| 1.3.6.1.4.1.9.9.297.1.1.17 | fcsPlatformNumber | 1 | 1 | The number of entries currently present in the fcsPlatformTable. |
| 1.3.6.1.4.1.9.9.297.1.1.18 | fcsPlatformTable | 1 | 10 | This table contains information on platforms. By default, this table only contains information pertaining to the local switch. If… |
| 1.3.6.1.4.1.9.9.297.1.1.19 | fcsNodeNameListTable | 1 | 5 | This table contains all the lists of nodes. |
| 1.3.6.1.4.1.9.9.297.1.1.20 | fcsReqRejNotifyEnable | 1 | 1 | This object specifies if the Fabric Configuration Server should issue a 'fcsReqRejNotify' notification. If the value of this objec… |
| 1.3.6.1.4.1.9.9.297.1.1.21 | fcsDiscoveryCompleteNotifyEnable | 1 | 1 | This object specifies if the Fabric Configuration Server should issue a 'fcsDiscoveryCompleteNotify' notification. If the value of… |