This object is used for specifying the
protcol to fallback to if the sending of
syslog messages using the protocol configured
in 'cseSyslogServerProtocol' fails.
If the value of this object is same as
the value specified in 'cseSyslogServerProtocol',
then protocol fallback in case of failure is not
supported.
Parsed from file CISCO-SYSLOG-EXT-MIB.mib
Module: CISCO-SYSLOG-EXT-MIB
This object is used for specifying the
protcol to fallback to if the sending of
syslog messages using the protocol configured
in 'cseSyslogServerProtocol' fails.
If the value of this object is same as
the value specified in 'cseSyslogServerProtocol',
then protocol fallback in case of failure is not
supported.
This object is used for specifying the
protcol to fallback to if the sending of
syslog messages using the protocol configured
in 'cseSyslogServerProtocol' fails.
If the value of this object is same as
the value specified in 'cseSyslogServerProtocol',
then protocol fallback in case of failure is not
supported.
Parsed from file CISCO-SYSLOG-EXT-MIB.my.txt
Company: None
Module: CISCO-SYSLOG-EXT-MIB
This object is used for specifying the
protcol to fallback to if the sending of
syslog messages using the protocol configured
in 'cseSyslogServerProtocol' fails.
If the value of this object is same as
the value specified in 'cseSyslogServerProtocol',
then protocol fallback in case of failure is not
supported.
cseSyslogServerProtocolFallback OBJECT-TYPE SYNTAX SyslogProtocol MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used for specifying the protcol to fallback to if the sending of syslog messages using the protocol configured in 'cseSyslogServerProtocol' fails. If the value of this object is same as the value specified in 'cseSyslogServerProtocol', then protocol fallback in case of failure is not supported." DEFVAL { udp } ::= { cseSyslogServerEntry 9 }
cseSyslogServerProtocolFallback OBJECT-TYPE SYNTAX SyslogProtocol ACCESS read-write STATUS mandatory DESCRIPTION "This object is used for specifying the protcol to fallback to if the sending of syslog messages using the protocol configured in 'cseSyslogServerProtocol' fails. If the value of this object is same as the value specified in 'cseSyslogServerProtocol', then protocol fallback in case of failure is not supported." DEFVAL { udp } ::= { cseSyslogServerEntry 9 }
Vendor: Cisco
Module: CISCO-SYSLOG-EXT-MIB
[Automatically extracted from oidview.com]
cseSyslogServerProtocolFallback OBJECT-TYPE SYNTAX SyslogProtocol MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used for specifying the protcol to fallback to if the sending of syslog messages using the protocol configured in 'cseSyslogServerProtocol' fails. If the value of this object is same as the value specified in 'cseSyslogServerProtocol', then protocol fallback in case of failure is not supported." DEFVAL { udp } ::= { cseSyslogServerEntry 9 }
cseSyslogServerProtocolFallback OBJECT-TYPE SYNTAX SyslogProtocol MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used for specifying the protcol to fallback to if the sending of syslog messages using the protocol configured in 'cseSyslogServerProtocol' fails. If the value of this object is same as the value specified in 'cseSyslogServerProtocol', then protocol fallback in case of failure is not supported." DEFVAL { udp } ::= { cseSyslogServerEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.301.1.1.7.1.1 | cseSyslogServerIndex | 0 | 0 | An arbitrary integer value, greater than zero, and less than and equal to cseSyslogServerTableMaxEntries, which identifies a Sysl… |
1.3.6.1.4.1.9.9.301.1.1.7.1.2 | cseSyslogServerAddressType | 0 | 0 | The type of the address of the Syslog server which is given by the corresponding value of cseSyslogServerAddress. |
1.3.6.1.4.1.9.9.301.1.1.7.1.3 | cseSyslogServerAddress | 0 | 0 | The address of the Syslog server. |
1.3.6.1.4.1.9.9.301.1.1.7.1.4 | cseSyslogServerMsgSeverity | 0 | 0 | Minimum severity of the message that are sent to this Syslog server. |
1.3.6.1.4.1.9.9.301.1.1.7.1.5 | cseSyslogServerStatus | 0 | 0 | The status of this row. A row can not become 'active' until the values for cseSyslogServerAddressType and cseSyslogServerAddress … |
1.3.6.1.4.1.9.9.301.1.1.7.1.6 | cseSyslogServerFacility | 0 | 0 | The facility to be used when sending Syslog messages to this server. |
1.3.6.1.4.1.9.9.301.1.1.7.1.7 | cseSyslogServerProtocol | 0 | 0 | The transport protocol used for sending syslog messages to syslog server. |
1.3.6.1.4.1.9.9.301.1.1.7.1.8 | cseSyslogServerPort | 0 | 0 | The port number of the syslog server to which syslog messages are sent. The default value in case of 'cseSyslogServerProtocol' val… |