This table lists all the FC nodes which the gateway
presents as iSCSI nodes to the iSCSI domain.
Entries in this table are automatically created when
FC nodes are discovered.
Entries in this table are automatically removed when
FC nodes go offline.
Entries also can be created/deleted using the
fc2IscsiNodeRowStatus object. An entry can be created by
to configure a node statically instead of allowing it to
be discovered.
A row in this table can not be made 'active' until values
are explicitly provided for that row's instances of
fc2IscsiNodeName and fc2IscsiNodeRole.
The following objects cannot be modified when the
fc2IscsiNodeRowStatus is 'active' :
- fc2IscsiNodeRole
- fc2IscsiNodeName
To modify the above objects, the entry must be deleted
and re-created with new values of above objects.
To create an iSCSI target from whole a FC target, use
fc2ScsiPortFCAddrListIndex.
To create an iSCSI target from Logical Units on the
FC targets, create an entry in this table. And
then create an entry (s) in the scsiLuExtTable using
fc2IscsiNodeName of an entry in this table as
scsiLuExtLocalTargetAddress value.
Parsed from file CISCO-ISCSI-GW-MIB.mib
Module: CISCO-ISCSI-GW-MIB
This table lists all the FC nodes which the gateway
presents as iSCSI nodes to the iSCSI domain.
Entries in this table are automatically created when
FC nodes are discovered.
Entries in this table are automatically removed when
FC nodes go offline.
Entries also can be created/deleted using the
fc2IscsiNodeRowStatus object. An entry can be created by
to configure a node statically instead of allowing it to
be discovered.
A row in this table can not be made 'active' until values
are explicitly provided for that row's instances of
fc2IscsiNodeName and fc2IscsiNodeRole.
The following objects cannot be modified when the
fc2IscsiNodeRowStatus is 'active' :
- fc2IscsiNodeRole
- fc2IscsiNodeName
To modify the above objects, the entry must be deleted
and re-created with new values of above objects.
To create an iSCSI target from whole a FC target, use
fc2ScsiPortFCAddrListIndex.
To create an iSCSI target from Logical Units on the
FC targets, create an entry in this table. And
then create an entry (s) in the scsiLuExtTable using
fc2IscsiNodeName of an entry in this table as
scsiLuExtLocalTargetAddress value.
This table lists all the FC nodes which the gateway
presents as iSCSI nodes to the iSCSI domain.
Entries in this table are automatically created when
FC nodes are discovered.
Entries in this table are automatically removed when
FC nodes go offline.
Entries also can be created/deleted using the
fc2IscsiNodeRowStatus object. An entry can be created by
to configure a node statically instead of allowing it to
be discovered.
A row in this table can not be made 'active' until values
are explicitly provided for that row's instances of
fc2IscsiNodeName and fc2IscsiNodeRole.
The following objects cannot be modified when the
fc2IscsiNodeRowStatus is 'active' :
- fc2IscsiNodeRole
- fc2IscsiNodeName
To modify the above objects, the entry must be deleted
and re-created with new values of above objects.
To create an iSCSI target from whole a FC target, use
fc2ScsiPortFCAddrListIndex.
To create an iSCSI target from Logical Units on the
FC targets, create an entry in this table. And
then create an entry (s) in the scsiLuExtTable using
fc2IscsiNodeName of an entry in this table as
scsiLuExtLocalTargetAddress value.
Parsed from file CISCO-ISCSI-GW-MIB.my.txt
Company: None
Module: CISCO-ISCSI-GW-MIB
This table lists all the FC nodes which the gateway
presents as iSCSI nodes to the iSCSI domain.
Entries in this table are automatically created when
FC nodes are discovered.
Entries in this table are automatically removed when
FC nodes go offline.
Entries also can be created/deleted using the
fc2IscsiNodeRowStatus object. An entry can be created by
to configure a node statically instead of allowing it to
be discovered.
A row in this table can not be made 'active' until values
are explicitly provided for that row's instances of
fc2IscsiNodeName and fc2IscsiNodeRole.
The following objects cannot be modified when the
fc2IscsiNodeRowStatus is 'active' :
- fc2IscsiNodeRole
- fc2IscsiNodeName
To modify the above objects, the entry must be deleted
and re-created with new values of above objects.
To create an iSCSI target from whole a FC target, use
fc2ScsiPortFCAddrListIndex.
To create an iSCSI target from Logical Units on the
FC targets, create an entry in this table. And
then create an entry (s) in the scsiLuExtTable using
fc2IscsiNodeName of an entry in this table as
scsiLuExtLocalTargetAddress value.
fc2IscsiNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF Fc2IscsiNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all the FC nodes which the gateway presents as iSCSI nodes to the iSCSI domain. Entries in this table are automatically created when FC nodes are discovered. Entries in this table are automatically removed when FC nodes go offline. Entries also can be created/deleted using the fc2IscsiNodeRowStatus object. An entry can be created by to configure a node statically instead of allowing it to be discovered. A row in this table can not be made 'active' until values are explicitly provided for that row's instances of fc2IscsiNodeName and fc2IscsiNodeRole. The following objects cannot be modified when the fc2IscsiNodeRowStatus is 'active' : - fc2IscsiNodeRole - fc2IscsiNodeName To modify the above objects, the entry must be deleted and re-created with new values of above objects. To create an iSCSI target from whole a FC target, use fc2ScsiPortFCAddrListIndex. To create an iSCSI target from Logical Units on the FC targets, create an entry in this table. And then create an entry (s) in the scsiLuExtTable using fc2IscsiNodeName of an entry in this table as scsiLuExtLocalTargetAddress value." ::= { ciScsiConfig 4 }
fc2IscsiNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF Fc2IscsiNodeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table lists all the FC nodes which the gateway presents as iSCSI nodes to the iSCSI domain. Entries in this table are automatically created when FC nodes are discovered. Entries in this table are automatically removed when FC nodes go offline. Entries also can be created/deleted using the fc2IscsiNodeRowStatus object. An entry can be created by to configure a node statically instead of allowing it to be discovered. A row in this table can not be made 'active' until values are explicitly provided for that row's instances of fc2IscsiNodeName and fc2IscsiNodeRole. The following objects cannot be modified when the fc2IscsiNodeRowStatus is 'active' : - fc2IscsiNodeRole - fc2IscsiNodeName To modify the above objects, the entry must be deleted and re-created with new values of above objects. To create an iSCSI target from whole a FC target, use fc2ScsiPortFCAddrListIndex. To create an iSCSI target from Logical Units on the FC targets, create an entry in this table. And then create an entry (s) in the scsiLuExtTable using fc2IscsiNodeName of an entry in this table as scsiLuExtLocalTargetAddress value." ::= { ciScsiConfig 4 }
Vendor: Cisco
Module: CISCO-ISCSI-GW-MIB
[Automatically extracted from oidview.com]
fc2IscsiNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF Fc2IscsiNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all the FC nodes which the gateway presents as iSCSI nodes to the iSCSI domain. Entries in this table are automatically created when FC nodes are discovered. Entries in this table are automatically removed when FC nodes go offline. Entries also can be created/deleted using the fc2IscsiNodeRowStatus object. An entry can be created by to configure a node statically instead of allowing it to be discovered. A row in this table can not be made 'active' until values are explicitly provided for that row's instances of fc2IscsiNodeName and fc2IscsiNodeRole. The following objects cannot be modified when the fc2IscsiNodeRowStatus is 'active' : - fc2IscsiNodeRole - fc2IscsiNodeName To modify the above objects, the entry must be deleted and re-created with new values of above objects. To create an iSCSI target from whole a FC target, use fc2ScsiPortFCAddrListIndex. To create an iSCSI target from Logical Units on the FC targets, create an entry in this table. And then create an entry (s) in the scsiLuExtTable using fc2IscsiNodeName of an entry in this table as scsiLuExtLocalTargetAddress value." ::= { ciScsiConfig 4 }
fc2IscsiNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF Fc2IscsiNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all the FC nodes which the gateway presents as iSCSI nodes to the iSCSI domain. Entries in this table are automatically created when FC nodes are discovered. Entries in this table are automatically removed when FC nodes go offline. Entries also can be created/deleted using the fc2IscsiNodeRowStatus object. An entry can be created by to configure a node statically instead of allowing it to be discovered. A row in this table can not be made 'active' until values are explicitly provided for that row's instances of fc2IscsiNodeName and fc2IscsiNodeRole. The following objects cannot be modified when the fc2IscsiNodeRowStatus is 'active' : - fc2IscsiNodeRole - fc2IscsiNodeName To modify the above objects, the entry must be deleted and re-created with new values of above objects. To create an iSCSI target from whole a FC target, use fc2ScsiPortFCAddrListIndex. To create an iSCSI target from Logical Units on the FC targets, create an entry in this table. And then create an entry (s) in the scsiLuExtTable using fc2IscsiNodeName of an entry in this table as scsiLuExtLocalTargetAddress value." ::= { ciScsiConfig 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.317.1.1.4.1 | fc2IscsiNodeEntry | 10 | 10 | An entry representing a FC node which is presented as an iSCSI node to the iSCSI domain. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.317.1.1.1 | iscsiImprtExprtTgtsConfTable | 1 | 3 | iscsiImprtExprtTgtsConftable |
| 1.3.6.1.4.1.9.9.317.1.1.2 | iscsiAuthMethod | 1 | 1 | The global authentication method for iSCSI. |
| 1.3.6.1.4.1.9.9.317.1.1.3 | iscsi2FcNodeTable | 1 | 17 | This table lists all the nodes in the iSCSI domain which are currently represented in the FC domain. Entries in this table are a… |
| 1.3.6.1.4.1.9.9.317.1.1.5 | fcAddressListTable | 1 | 6 | This table contains the list of FC addresses. Entries in this table are automatically created/deleted when the FC addresses are a… |
| 1.3.6.1.4.1.9.9.317.1.1.6 | iscsiNodeNameListTable | 1 | 5 | This table contains the list of iSCSI node names. A row in this table can not be made 'active' until a value is explicitly provid… |
| 1.3.6.1.4.1.9.9.317.1.1.7 | nodeAdvIntfListTable | 1 | 5 | This table contains the list of advertised interface list. A FC node represented in the iSCSI domain as an iSCSI node is advertise… |
| 1.3.6.1.4.1.9.9.317.1.1.8 | scsiLuExtTable | 1 | 8 | An extension of the scsiLuTable to support creation of iSCSI virtual targets from LUs on remote FC targets. To create iSCSI virtu… |
| 1.3.6.1.4.1.9.9.317.1.1.9 | iscsiIfTable | 1 | 25 | iscsiIftable |
| 1.3.6.1.4.1.9.9.317.1.1.10 | iscsiGigEIfTable | 1 | 4 | iscsiGigEIftable |
| 1.3.6.1.4.1.9.9.317.1.1.11 | iscsiInitiatorIdleTimeout | 1 | 1 | The time for which the gateway (representing a FC target) waits from the time of last iSCSI session to a iSCSI initiator went dow… |
| 1.3.6.1.4.1.9.9.317.1.1.12 | iscsiIntrIdentificationMode | 1 | 1 | This objects indicates how the initiator is identified on local device, either by its iSCSI name (name) or by its IP address (ipa… |
| 1.3.6.1.4.1.9.9.317.1.1.13 | iscsiTargetUserName | 1 | 1 | The global user name to be used during the login authentication. If the initiator specific username is specified by iscsi2FcTarge… |
| 1.3.6.1.4.1.9.9.317.1.1.14 | iscsiTargetPassword | 1 | 1 | The password to be used during the login authentication. If the initiator specific password is specified by iscsi2FcTargetPasswo… |