This object specifies which protocol that the MG
should use to communicate with the MGC when it
try to set up the call.
The value of this object is the same as the value of object
cMediaGwProtocolIndex from protocol table
(cMediaGwProtocolTable).
If the value of cXgcpMgcConfigMgcGrpNum is non-zero, this
object will be ignored because the protocol will be
determined by the MGC group.
The initial value is 1, means the system should have at
least one default protocol between the gateway and the MGC
created in the cMeidaGwProtocolTable when the system is
initialized.
Parsed from file CISCO-XGCP-MIB.mib
Module: CISCO-XGCP-MIB
This object specifies which protocol that the MG
should use to communicate with the MGC when it
try to set up the call.
The value of this object is the same as the value of object
cMediaGwProtocolIndex from protocol table
(cMediaGwProtocolTable).
If the value of cXgcpMgcConfigMgcGrpNum is non-zero, this
object will be ignored because the protocol will be
determined by the MGC group.
The initial value is 1, means the system should have at
least one default protocol between the gateway and the MGC
created in the cMeidaGwProtocolTable when the system is
initialized.
This object specifies which protocol that the MG
should use to communicate with the MGC when it
try to set up the call.
The value of this object is the same as the value of object
cMediaGwProtocolIndex from protocol table
(cMediaGwProtocolTable).
If the value of cXgcpMgcConfigMgcGrpNum is non-zero, this
object will be ignored because the protocol will be
determined by the MGC group.
The initial value is 1, means the system should have at
least one default protocol between the gateway and the MGC
created in the cMeidaGwProtocolTable when the system is
initialized.
Parsed from file CISCO-XGCP-MIB.my.txt
Company: None
Module: CISCO-XGCP-MIB
This object specifies which protocol that the MG
should use to communicate with the MGC when it
try to set up the call.
The value of this object is the same as the value of object
cMediaGwProtocolIndex from protocol table
(cMediaGwProtocolTable).
If the value of cXgcpMgcConfigMgcGrpNum is non-zero, this
object will be ignored because the protocol will be
determined by the MGC group.
The initial value is 1, means the system should have at
least one default protocol between the gateway and the MGC
created in the cMeidaGwProtocolTable when the system is
initialized.
cXgcpMgcConfigProtocolIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies which protocol that the MG should use to communicate with the MGC when it try to set up the call. The value of this object is the same as the value of object cMediaGwProtocolIndex from protocol table (cMediaGwProtocolTable). If the value of cXgcpMgcConfigMgcGrpNum is non-zero, this object will be ignored because the protocol will be determined by the MGC group. The initial value is 1, means the system should have at least one default protocol between the gateway and the MGC created in the cMeidaGwProtocolTable when the system is initialized. " DEFVAL { 1 } ::= { cXgcpMgcConfigEntry 4 }
cXgcpMgcConfigProtocolIndex OBJECT-TYPE SYNTAX INTEGER(1..32) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies which protocol that the MG should use to communicate with the MGC when it try to set up the call. The value of this object is the same as the value of object cMediaGwProtocolIndex from protocol table (cMediaGwProtocolTable). If the value of cXgcpMgcConfigMgcGrpNum is non-zero, this object will be ignored because the protocol will be determined by the MGC group. The initial value is 1, means the system should have at least one default protocol between the gateway and the MGC created in the cMeidaGwProtocolTable when the system is initialized. " DEFVAL { 1 } ::= { cXgcpMgcConfigEntry 4 }
Vendor: Cisco
Module: CISCO-XGCP-MIB
[Automatically extracted from oidview.com]
cXgcpMgcConfigProtocolIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies which protocol that the MG should use to communicate with the MGC when it try to set up the call. The value of this object is the same as the value of object cMediaGwProtocolIndex from protocol table (cMediaGwProtocolTable). If the value of cXgcpMgcConfigMgcGrpNum is non-zero, this object will be ignored because the protocol will be determined by the MGC group. The initial value is 1, means the system should have at least one default protocol between the gateway and the MGC created in the cMeidaGwProtocolTable when the system is initialized. " DEFVAL { 1 } ::= { cXgcpMgcConfigEntry 4 }
cXgcpMgcConfigProtocolIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies which protocol that the MG should use to communicate with the MGC when it try to set up the call. The value of this object is the same as the value of object cMediaGwProtocolIndex from protocol table (cMediaGwProtocolTable). If the value of cXgcpMgcConfigMgcGrpNum is non-zero, this object will be ignored because the protocol will be determined by the MGC group. The initial value is 1, means the system should have at least one default protocol between the gateway and the MGC created in the cMeidaGwProtocolTable when the system is initialized. " DEFVAL { 1 } ::= { cXgcpMgcConfigEntry 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.318.1.1.1.1.1 | cXgcpMgcConfigMgcGrpNum | 0 | 0 | This object specifies which MGC Redundant Group will be used in XGCP. The value of this object refers to the object cMgcGrpIndex f… |
1.3.6.1.4.1.9.9.318.1.1.1.1.2 | cXgcpMgcConfigAddrType | 0 | 0 | This object specifies the address type of the MGC (object cXgcpMgcConfigAddress), either ipv4 or ipv6. |
1.3.6.1.4.1.9.9.318.1.1.1.1.3 | cXgcpMgcConfigAddress | 0 | 0 | This object specifies the address of the MGC the gateway used to communicate with in call setup. This object cXgcpMgcConfigAddres… |
1.3.6.1.4.1.9.9.318.1.1.1.1.5 | cXgcpMgcConfigGatewayUdpPort | 0 | 0 | The UDP port of the MG which is used to communicate with call agent in MGCP. |