This object specifies the payload type of the CODEC in
voice application as specified in RFC1890.
The values (0..95) are static payload type.
The values (96..127) are dynamic payload type and it is
specified dynamically through the control protocol during
call setup.
If more than one CODEC have the same payload type,
the CODEC with the highest preference (the lowest value of
cvapCodecConfigPreference) will be selected.
Parsed from file CISCO-VOICE-AALX-PROFILE-MIB.mib
Module: CISCO-VOICE-AALX-PROFILE-MIB
This object specifies the payload type of the CODEC in
voice application as specified in RFC1890.
The values (0..95) are static payload type.
The values (96..127) are dynamic payload type and it is
specified dynamically through the control protocol during
call setup.
If more than one CODEC have the same payload type,
the CODEC with the highest preference (the lowest value of
cvapCodecConfigPreference) will be selected.
This object specifies the payload type of the CODEC in
voice application as specified in RFC1890.
The values (0..95) are static payload type.
The values (96..127) are dynamic payload type and it is
specified dynamically through the control protocol during
call setup.
If more than one CODEC have the same payload type,
the CODEC with the highest preference (the lowest value of
cvapCodecConfigPreference) will be selected.
Parsed from file CISCO-VOICE-AALX-PROFILE-MIB.my.txt
Company: None
Module: CISCO-VOICE-AALX-PROFILE-MIB
This object specifies the payload type of the CODEC in
voice application as specified in RFC1890.
The values (0..95) are static payload type.
The values (96..127) are dynamic payload type and it is
specified dynamically through the control protocol during
call setup.
If more than one CODEC have the same payload type,
the CODEC with the highest preference (the lowest value of
cvapCodecConfigPreference) will be selected.
cvapCodecConfigPayloadType OBJECT-TYPE SYNTAX Unsigned32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the payload type of the CODEC in voice application as specified in RFC1890. The values (0..95) are static payload type. The values (96..127) are dynamic payload type and it is specified dynamically through the control protocol during call setup. If more than one CODEC have the same payload type, the CODEC with the highest preference (the lowest value of cvapCodecConfigPreference) will be selected." REFERENCE "RFC 1890 - RTP Profile for Audio and Video Conferences with Minimal Control." ::= { cvapCodecConfigEntry 11 }
cvapCodecConfigPayloadType OBJECT-TYPE SYNTAX Gauge(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the payload type of the CODEC in voice application as specified in RFC1890. The values (0..95) are static payload type. The values (96..127) are dynamic payload type and it is specified dynamically through the control protocol during call setup. If more than one CODEC have the same payload type, the CODEC with the highest preference (the lowest value of cvapCodecConfigPreference) will be selected." REFERENCE "RFC 1890 - RTP Profile for Audio and Video Conferences with Minimal Control." ::= { cvapCodecConfigEntry 11 }
Vendor: Cisco
Module: CISCO-VOICE-AALX-PROFILE-MIB
[Automatically extracted from oidview.com]
cvapCodecConfigPayloadType OBJECT-TYPE SYNTAX Unsigned32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the payload type of the CODEC in voice application as specified in RFC1890. The values (0..95) are static payload type. The values (96..127) are dynamic payload type and it is specified dynamically through the control protocol during call setup. If more than one CODEC have the same payload type, the CODEC with the highest preference (the lowest value of cvapCodecConfigPreference) will be selected." REFERENCE "RFC 1890 - RTP Profile for Audio and Video Conferences with Minimal Control." ::= { cvapCodecConfigEntry 11 }
cvapCodecConfigPayloadType OBJECT-TYPE SYNTAX Unsigned32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the payload type of the CODEC in voice application as specified in RFC1890. The values (0..95) are static payload type. The values (96..127) are dynamic payload type and it is specified dynamically through the control protocol during call setup. If more than one CODEC have the same payload type, the CODEC with the highest preference (the lowest value of cvapCodecConfigPreference) will be selected." REFERENCE "RFC 1890 - RTP Profile for Audio and Video Conferences with Minimal Control." ::= { cvapCodecConfigEntry 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.323.1.1.2.1.1 | cvapCodecConfigAdaptType | 0 | 0 | An unique index identifying the adaptation layer supported by voice applications in the media gateway. The adaptation types inclu… |
1.3.6.1.4.1.9.9.323.1.1.2.1.2 | cvapCodecConfigType | 0 | 0 | This object specifies the CODEC rate defined in CvcSpeechCoderRate. |
1.3.6.1.4.1.9.9.323.1.1.2.1.3 | cvapCodecConfigPreference | 0 | 0 | This object specified the preference configured by the user for each CODEC. Lower the number, higher the preference of the CODEC.… |
1.3.6.1.4.1.9.9.323.1.1.2.1.4 | cvapCodecConfigVoicePacketPeriod | 0 | 0 | This object specifies the packetization period for a particular CODEC in voice application. The packetization period represents t… |
1.3.6.1.4.1.9.9.323.1.1.2.1.5 | cvapCodecConfigVbdPacketPeriod | 0 | 0 | This object specifies the packetization period for a particular CODEC in VBD (Voice Band Data) upspeed. The packetization period … |
1.3.6.1.4.1.9.9.323.1.1.2.1.6 | cvapCodecConfigJitterDelayMode | 0 | 0 | The object specifies the jitter buffer mode applied to a call connection. adaptive - means to use cvapCodecConfigNewJtrNomDelay a… |
1.3.6.1.4.1.9.9.323.1.1.2.1.7 | cvapCodecConfigJitterMaxDelay | 0 | 0 | This object specifies the maximum jitter buffer size. If cvapCodecConfigJitterDelayMode is set to adaptive(1), the DSP will dynam… |
1.3.6.1.4.1.9.9.323.1.1.2.1.8 | cvapCodecConfigJitterNomDelay | 0 | 0 | This object specifies the nominal jitter buffer size. If cvapCodecConfigJitterDelayMode is set to fixed(2), the jitter buffer is … |
1.3.6.1.4.1.9.9.323.1.1.2.1.9 | cvapCodecConfigJitterMinDelay | 0 | 0 | This object specifies the minimum jitter buffer size. If cvapCodecConfigJitterDelayMode is set to adaptive(1), the DSP will dynam… |
1.3.6.1.4.1.9.9.323.1.1.2.1.10 | cvapCodecConfigDtmfRelay | 0 | 0 | When this object is set to 'true', the digits will be sent as peer-to-peer packet in the bearer. When this object is set to 'fals… |
1.3.6.1.4.1.9.9.323.1.1.2.1.12 | cvapCodecConfigNewJtrNomDelay | 0 | 0 | This object specifies the nominal jitter buffer size. If cvapCodecConfigJitterDelayMode is set to fixed(2), the jitter buffer is … |