List of the possible route state values.
'unknown' : A destination state of unknown
occurs when the destination is a summary route.
Unknown state is presented to indicate the
protocols do not exchange state information for
summary routes in certain configurations.
'accessible' : The destination can be reached by
one or more routes specified for the destination.
When summary routing is enabled, a destination
status will also depend on route table entries that
specify less specific matches. See Example 4 in
the DESCRIPTION section for such a configuration.
'inaccessible' : Destination can not be reached by
any route known to this signalling point.
'restricted' : Traffic has been restricted from
being sent to the destination. The restricted state
indicates that the primary route for the destination
is unavailable or that it is impacted by some network
event or failure of resource.
Parsed from file CISCO-ITP-GRT-MIB.mib
Module: CISCO-ITP-GRT-MIB
List of the possible route state values.
'unknown' : A destination state of unknown
occurs when the destination is a summary route.
Unknown state is presented to indicate the
protocols do not exchange state information for
summary routes in certain configurations.
'accessible' : The destination can be reached by
one or more routes specified for the destination.
When summary routing is enabled, a destination
status will also depend on route table entries that
specify less specific matches. See Example 4 in
the DESCRIPTION section for such a configuration.
'inaccessible' : Destination can not be reached by
any route known to this signalling point.
'restricted' : Traffic has been restricted from
being sent to the destination. The restricted state
indicates that the primary route for the destination
is unavailable or that it is impacted by some network
event or failure of resource.
List of the possible route state values.
'unknown' : A destination state of unknown
occurs when the destination is a summary route.
Unknown state is presented to indicate the
protocols do not exchange state information for
summary routes in certain configurations.
'accessible' : The destination can be reached by
one or more routes specified for the destination.
When summary routing is enabled, a destination
status will also depend on route table entries that
specify less specific matches. See Example 4 in
the DESCRIPTION section for such a configuration.
'inaccessible' : Destination can not be reached by
any route known to this signalling point.
'restricted' : Traffic has been restricted from
being sent to the destination. The restricted state
indicates that the primary route for the destination
is unavailable or that it is impacted by some network
event or failure of resource.
Parsed from file CISCO-ITP-GRT-MIB.my.txt
Company: None
Module: CISCO-ITP-GRT-MIB
List of the possible route state values.
'unknown' : A destination state of unknown
occurs when the destination is a summary route.
Unknown state is presented to indicate the
protocols do not exchange state information for
summary routes in certain configurations.
'accessible' : The destination can be reached by
one or more routes specified for the destination.
When summary routing is enabled, a destination
status will also depend on route table entries that
specify less specific matches. See Example 4 in
the DESCRIPTION section for such a configuration.
'inaccessible' : Destination can not be reached by
any route known to this signalling point.
'restricted' : Traffic has been restricted from
being sent to the destination. The restricted state
indicates that the primary route for the destination
is unavailable or that it is impacted by some network
event or failure of resource.
cgrtDestStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), accessible(2), inaccessible(3), restricted(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "List of the possible route state values. 'unknown' : A destination state of unknown occurs when the destination is a summary route. Unknown state is presented to indicate the protocols do not exchange state information for summary routes in certain configurations. 'accessible' : The destination can be reached by one or more routes specified for the destination. When summary routing is enabled, a destination status will also depend on route table entries that specify less specific matches. See Example 4 in the DESCRIPTION section for such a configuration. 'inaccessible' : Destination can not be reached by any route known to this signalling point. 'restricted' : Traffic has been restricted from being sent to the destination. The restricted state indicates that the primary route for the destination is unavailable or that it is impacted by some network event or failure of resource." ::= { cgrtDestEntry 1 }
cgrtDestStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), accessible(2), inaccessible(3), restricted(4) } ACCESS read-only STATUS mandatory DESCRIPTION "List of the possible route state values. 'unknown' : A destination state of unknown occurs when the destination is a summary route. Unknown state is presented to indicate the protocols do not exchange state information for summary routes in certain configurations. 'accessible' : The destination can be reached by one or more routes specified for the destination. When summary routing is enabled, a destination status will also depend on route table entries that specify less specific matches. See Example 4 in the DESCRIPTION section for such a configuration. 'inaccessible' : Destination can not be reached by any route known to this signalling point. 'restricted' : Traffic has been restricted from being sent to the destination. The restricted state indicates that the primary route for the destination is unavailable or that it is impacted by some network event or failure of resource." ::= { cgrtDestEntry 1 }
Vendor: Cisco
Module: CISCO-ITP-GRT-MIB
[Automatically extracted from oidview.com]
cgrtDestStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), accessible(2), inaccessible(3), restricted(4) } ACCESS read-only STATUS mandatory DESCRIPTION "List of the possible route state values. 'unknown' : A destination state of unknown occurs when the destination is a summary route. Unknown state is presented to indicate the protocols do not exchange state information for summary routes in certain configurations. 'accessible' : The destination can be reached by one or more routes specified for the destination. When summary routing is enabled, a destination status will also depend on route table entries that specify less specific matches. See Example 4 in the DESCRIPTION section for such a configuration. 'inaccessible' : Destination can not be reached by any route known to this signalling point. 'restricted' : Traffic has been restricted from being sent to the destination. The restricted state indicates that the primary route for the destination is unavailable or that it is impacted by some network event or failure of resource." ::= { cgrtDestEntry 1 }
cgrtDestStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), accessible(2), inaccessible(3), restricted(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "List of the possible route state values. 'unknown' : A destination state of unknown occurs when the destination is a summary route. Unknown state is presented to indicate the protocols do not exchange state information for summary routes in certain configurations. 'accessible' : The destination can be reached by one or more routes specified for the destination. When summary routing is enabled, a destination status will also depend on route table entries that specify less specific matches. See Example 4 in the DESCRIPTION section for such a configuration. 'inaccessible' : Destination can not be reached by any route known to this signalling point. 'restricted' : Traffic has been restricted from being sent to the destination. The restricted state indicates that the primary route for the destination is unavailable or that it is impacted by some network event or failure of resource." ::= { cgrtDestEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.334.1.2.2.1.2 | cgrtDestCongestion | 0 | 0 | The congestion status of this destination. The value indicates congestion on one or more links in one of the linksets used to ro… |
| 1.3.6.1.4.1.9.9.334.1.2.2.1.3 | cgrtDestAccessibleSeconds | 0 | 0 | Duration in seconds that this destination was in the accessible state. |
| 1.3.6.1.4.1.9.9.334.1.2.2.1.4 | cgrtDestInaccessibleSeconds | 0 | 0 | Duration in seconds that this destination was in the inaccessible state. |
| 1.3.6.1.4.1.9.9.334.1.2.2.1.5 | cgrtDestRestrictedSeconds | 0 | 0 | Duration in seconds that this destination was in the restricted state. |
| 1.3.6.1.4.1.9.9.334.1.2.2.1.6 | cgrtDestMSUsOut | 0 | 0 | The number of MSUs that were queued to linkset for transmission to this destination. Management MSUs that originate from this sig… |
| 1.3.6.1.4.1.9.9.334.1.2.2.1.7 | cgrtDestOctetsOut | 0 | 0 | The number of Octets in MSUs that were queued to linkset for transmission to this destination. It is important to note that, in r… |
| 1.3.6.1.4.1.9.9.334.1.2.2.1.8 | cgrtDestMSUsIn | 0 | 0 | The number of MSUs that arrived to this signalling point bound for this destination. This includes the received as well as blocke… |
| 1.3.6.1.4.1.9.9.334.1.2.2.1.9 | cgrtDestOctetsIn | 0 | 0 | The number of Octets in MSUs that arrived to this signalling point bound for this destination. |
| 1.3.6.1.4.1.9.9.334.1.2.2.1.10 | cgrtDestInaccessibleDrops | 0 | 0 | The number of MSUs dropped for this destination due to inaccessible route state. |
| 1.3.6.1.4.1.9.9.334.1.2.2.1.11 | cgrtDestRestrictedMSUs | 0 | 0 | The number of MSUs transferred for this destination during a restricted route state. |
| 1.3.6.1.4.1.9.9.334.1.2.2.1.12 | cgrtDestCongestionDrops | 0 | 0 | The number of MSUs dropped for this destination due to local and remote congestion. |
| 1.3.6.1.4.1.9.9.334.1.2.2.1.13 | cgrtDestDisplay | 0 | 0 | The destination point code in display format. |