This object contains the number of external AIS AAL2 Type3
packets received.
External AIS : alarm indication signal associated with
a maintenance alarm detected on a defective maintenance
span, that is transmitted in the direction of the defect
as a substitute for normal signal. The purpose is to show
the downstream entities that a defect has been identified
and to prevent other maintenance alarms consequent to this
first defect.
Parsed from file CISCO-ATM-TRUNK-MIB.mib
Module: CISCO-ATM-TRUNK-MIB
This object contains the number of external AIS AAL2 Type3
packets received.
External AIS : alarm indication signal associated with
a maintenance alarm detected on a defective maintenance
span, that is transmitted in the direction of the defect
as a substitute for normal signal. The purpose is to show
the downstream entities that a defect has been identified
and to prevent other maintenance alarms consequent to this
first defect.
This object contains the number of external AIS AAL2 Type3
packets received.
External AIS : alarm indication signal associated with
a maintenance alarm detected on a defective maintenance
span, that is transmitted in the direction of the defect
as a substitute for normal signal. The purpose is to show
the downstream entities that a defect has been identified
and to prevent other maintenance alarms consequent to this
first defect.
Parsed from file CISCO-ATM-TRUNK-MIB.my.txt
Company: None
Module: CISCO-ATM-TRUNK-MIB
This object contains the number of external AIS AAL2 Type3
packets received.
External AIS : alarm indication signal associated with
a maintenance alarm detected on a defective maintenance
span, that is transmitted in the direction of the defect
as a substitute for normal signal. The purpose is to show
the downstream entities that a defect has been identified
and to prevent other maintenance alarms consequent to this
first defect.
catmtCidExtAISCnts OBJECT-TYPE SYNTAX Counter32SinceReset MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of external AIS AAL2 Type3 packets received. External AIS : alarm indication signal associated with a maintenance alarm detected on a defective maintenance span, that is transmitted in the direction of the defect as a substitute for normal signal. The purpose is to show the downstream entities that a defect has been identified and to prevent other maintenance alarms consequent to this first defect. " REFERENCE "ITU-T G.366.2 Annex N" ::= { catmtCidStatsEntry 7 }
catmtCidExtAISCnts OBJECT-TYPE SYNTAX Counter32SinceReset ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of external AIS AAL2 Type3 packets received. External AIS : alarm indication signal associated with a maintenance alarm detected on a defective maintenance span, that is transmitted in the direction of the defect as a substitute for normal signal. The purpose is to show the downstream entities that a defect has been identified and to prevent other maintenance alarms consequent to this first defect." REFERENCE "ITU-T G.366.2 Annex N" ::= { catmtCidStatsEntry 7 }
Vendor: Cisco
Module: CISCO-ATM-TRUNK-MIB
[Automatically extracted from oidview.com]
catmtCidExtAISCnts OBJECT-TYPE SYNTAX Counter32SinceReset MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of external AIS AAL2 Type3 packets received. External AIS : alarm indication signal associated with a maintenance alarm detected on a defective maintenance span, that is transmitted in the direction of the defect as a substitute for normal signal. The purpose is to show the downstream entities that a defect has been identified and to prevent other maintenance alarms consequent to this first defect. " REFERENCE "ITU-T G.366.2 Annex N" ::= { catmtCidStatsEntry 7 }
catmtCidExtAISCnts OBJECT-TYPE SYNTAX Counter32SinceReset MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of external AIS AAL2 Type3 packets received. External AIS : alarm indication signal associated with a maintenance alarm detected on a defective maintenance span, that is transmitted in the direction of the defect as a substitute for normal signal. The purpose is to show the downstream entities that a defect has been identified and to prevent other maintenance alarms consequent to this first defect. " REFERENCE "ITU-T G.366.2 Annex N" ::= { catmtCidStatsEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.351.1.2.1.1.1 | catmtCidSentPackets | 0 | 0 | This object indicates the number of packets sent towards network side since the connection setup. |
1.3.6.1.4.1.9.9.351.1.2.1.1.2 | catmtCidRcvdPackets | 0 | 0 | This object indicates the count of packets received from network side since the connection setup. |
1.3.6.1.4.1.9.9.351.1.2.1.1.3 | catmtCidSentOctets | 0 | 0 | This object indicates the count of bytes sent towards network side since connection setup. |
1.3.6.1.4.1.9.9.351.1.2.1.1.4 | catmtCidRcvdOctets | 0 | 0 | This object indicates the count of bytes received from network since connection setup. |
1.3.6.1.4.1.9.9.351.1.2.1.1.5 | catmtCidLostPackets | 0 | 0 | This object indicates the count of packets lost in the egress direction (from the network). This number is computed based on the … |
1.3.6.1.4.1.9.9.351.1.2.1.1.6 | catmtCidJitter | 0 | 0 | This object indicates the jitter (a.k.a interarrival jitter). This value is determined by the gateway DSP and obtained by the pro… |
1.3.6.1.4.1.9.9.351.1.2.1.1.8 | catmtCidExtRAICnts | 0 | 0 | This object contains the number of external RAI AAL2 Type3 packets received. External RAI is transmitted upstream from an entity … |
1.3.6.1.4.1.9.9.351.1.2.1.1.9 | catmtCidConnAISCnts | 0 | 0 | This object contains the number of external connection AIS AAL2 packets received. External Conn AIS is a Alarm Indicating Signal … |
1.3.6.1.4.1.9.9.351.1.2.1.1.10 | catmtCidConnRDICnts | 0 | 0 | This object contains the number of external connection RDI AAL2 packets received. External Connection RDI - is a signal transmit… |
1.3.6.1.4.1.9.9.351.1.2.1.1.11 | catmtCidNx64FramesTxToTDM | 0 | 0 | This object contains the number of frames transmitted to the TDM interface. This object is only applicable when catmtCidNx64Mode i… |
1.3.6.1.4.1.9.9.351.1.2.1.1.12 | catmtCidNx64FramesRxFromTDM | 0 | 0 | This object contains the number of frames received from the TDM interface. This object is only applicable when catmtCidNx64Mode i… |
1.3.6.1.4.1.9.9.351.1.2.1.1.13 | catmtCidNx64EncBytesTxToTDM | 0 | 0 | This object contains the number of encoded bytes transmitted to the TDM interface. |
1.3.6.1.4.1.9.9.351.1.2.1.1.14 | catmtCidNx64EncBytesRxFromTDM | 0 | 0 | This object contains the number of encoded bytes received from the TDM interface. |
1.3.6.1.4.1.9.9.351.1.2.1.1.15 | catmtCidNx64InvalidFCSFrames | 0 | 0 | This object contains the number of invalid frames received with invalid Frame Check Sequence (FCS) error. This object is only app… |
1.3.6.1.4.1.9.9.351.1.2.1.1.16 | catmtCidNx64AbortSeqFrames | 0 | 0 | This object contains the number of invalid frames received with invalid frame abort sequence error. This object is only applicabl… |
1.3.6.1.4.1.9.9.351.1.2.1.1.17 | catmtCidNx64InvalidShortFrames | 0 | 0 | This object contains the number of invalid short frames (length less than minimum length) received. This object is only applicabl… |
1.3.6.1.4.1.9.9.351.1.2.1.1.18 | catmtCidNx64InvalidLongFrames | 0 | 0 | This object contains the number of invalid long frames (length greater than maximum length) received. This object is only applica… |
1.3.6.1.4.1.9.9.351.1.2.1.1.19 | catmtCidNx64NoByteAlignErrorFrames | 0 | 0 | This object contains the number of invalid frames received with no byte alignment. This object is only applicable when catmtCidNx… |
1.3.6.1.4.1.9.9.351.1.2.1.1.20 | catmtCidNx64RASTimeOutFrames | 0 | 0 | This object contains the number of frames received with RAS timer timeout. This object is only applicable when catmtCidNx64Mode is… |
1.3.6.1.4.1.9.9.351.1.2.1.1.21 | catmtCidLastResetTime | 0 | 0 | This object contains the value of sysUpTime when the last counter reset occurred. If no counter reset has occurred since the last… |
1.3.6.1.4.1.9.9.351.1.2.1.1.22 | catmtCidCounterClear | 0 | 0 | When this object is set to value of true(1), all statistics counters with type of Counter32SinceReset in the table catmtCidStatsT… |