This object reflects the actual state of the LECS
which may differ from that of the lecsAdminStatus
object. This can occur when the interface
ifOperStatus is 'down' but the corresponding
lecsAdminStatus is 'active'.
Parsed from file CISCO-LECS-MIB.mib
Module: CISCO-LECS-MIB
This object reflects the actual state of the LECS
which may differ from that of the lecsAdminStatus
object. This can occur when the interface
ifOperStatus is 'down' but the corresponding
lecsAdminStatus is 'active'.
lecsOperStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), inactive(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object reflects the actual state of the LECS
which may differ from that of the lecsAdminStatus
object. This can occur when the interface
ifOperStatus is down but the corresponding
lecsAdminStatus is active."
View at oid-info.com
This object reflects the actual state of the LECS
which may differ from that of the lecsAdminStatus
object. This can occur when the interface
ifOperStatus is 'down' but the corresponding
lecsAdminStatus is 'active'.
Parsed from file CISCO-LECS-MIB.my.txt
Company: None
Module: CISCO-LECS-MIB
This object reflects the actual state of the LECS
which may differ from that of the lecsAdminStatus
object. This can occur when the interface
ifOperStatus is 'down' but the corresponding
lecsAdminStatus is 'active'.
lecsOperStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } ACCESS read-only STATUS mandatory DESCRIPTION " This object reflects the actual state of the LECS which may differ from that of the lecsAdminStatus object. This can occur when the interface ifOperStatus is 'down' but the corresponding lecsAdminStatus is 'active'." ::= { lecsEntry 8 }
lecsOperStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } ACCESS read-only STATUS mandatory DESCRIPTION " This object reflects the actual state of the LECS which may differ from that of the lecsAdminStatus object. This can occur when the interface ifOperStatus is 'down' but the corresponding lecsAdminStatus is 'active'." ::= { lecsEntry 8 }
Automatically extracted from Cisco "SNMP v2 MIBs".
lecsOperStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " This object reflects the actual state of the LECS which may differ from that of the lecsAdminStatus object. This can occur when the interface ifOperStatus is 'down' but the corresponding lecsAdminStatus is 'active'." ::= { lecsEntry 8 }
lecsOperStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " This object reflects the actual state of the LECS which may differ from that of the lecsAdminStatus object. This can occur when the interface ifOperStatus is 'down' but the corresponding lecsAdminStatus is 'active'." ::= { lecsEntry 8 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.38.1.1.1.1.1 | lecsConfigTableName | 0 | 0 | The textual name used to identify a configuration table in use by the designated LECS. Note that this value must be a r… |
1.3.6.1.4.1.9.9.38.1.1.1.1.2 | lecsUpTime | 0 | 0 | The value of sysUpTime when this entry was created. Note that changing the value of the lecsAdminStatus will not affect the v… |
1.3.6.1.4.1.9.9.38.1.1.1.1.3 | lecsInConfigReqs | 0 | 0 | The number of LE_CONFIGURE_REQUESTs that have been received by this LECS on this designated interface. |
1.3.6.1.4.1.9.9.38.1.1.1.1.4 | lecsInConfigErrors | 0 | 0 | Then number of packets sent to the LECS from the lower layers but which were not correctly formatted configure requests. |
1.3.6.1.4.1.9.9.38.1.1.1.1.5 | lecsOutConfigFails | 0 | 0 | The number of LE_CONFIGURE_RESPONSEs sent by this particular LECS whose status was other than success. |
1.3.6.1.4.1.9.9.38.1.1.1.1.6 | lecsLastFailCause | 0 | 0 | The cause for rejection of the last LE_CONFIGURE_REQUEST. This will be the value of the status field that … |
1.3.6.1.4.1.9.9.38.1.1.1.1.7 | lecsLastFailLec | 0 | 0 | The ATM address of the LE client whose last configuration request was rejected. This ATM address will be for the LE cli… |
1.3.6.1.4.1.9.9.38.1.1.1.1.9 | lecsAdminStatus | 0 | 0 | The desired state of the LECS on this interface as prescribed by the operator. The actions of the agent will, if at all pos… |
1.3.6.1.4.1.9.9.38.1.1.1.1.10 | lecsStatus | 0 | 0 | The status object for the lecsEntry. Note that the lecsConfigTableName must be specified at row creation time. |
1.3.6.1.4.1.9.9.38.1.1.1.1.11 | lecsMasterState | 0 | 0 | An indication of whether the LECS is acting as the operative master or is a redundant slave. |