The following options define the source and
processing of triggers.
'block' : Indicates that message signal units will be
dropped when they match the specified trigger.
When sub-trigger(secondary triggers) exist
the option will be ignored.
'continue' : Indicates that message signal units will be
processed by the normal SCCP routing.
The continue, block and ruleset are mutually
exclusive.
'matchAll': Indicates the trigger will match all
message signal unit.
'cdpa' : Indicates that the trigger is found within
the SCCP called party address field(cdpa).
'cgpa' : Indicates that the trigger is found within
the SCCP calling party address field(cgpa).
'pc' : Indicates that the trigger will be matched if
it contains the specified point-code. The
point-code within the SCCP Cdpa or CgPa will
be inspected first. If the point code is not
present, then the DPC in the routing label is
used if CdPA, and the OPC is used for CgPA.
'gt' : Indicates that the Cgpa or CdPA trigger is to
be applied to packet when routing indicator
specifies global title translation(RI=GT).
'tt' : Indicates that the translation type has been
specified in the cmlrTriggerTransType object.
'gti' : Indicates that the global title indicator has
been specified in the cmlrTriggerGti
object.
'np' : Indicates that the numbering plan has been
specified in the cmlrTriggerNp object.
'nai : Indicates that the nature of specified address
has been specified in the cmlrTriggerNai object.
'ssn' : Indicates that the subsystem number has been
in the cmlrTriggerSsn object.
'network' : Indicates the network name has been specified
in the cmlrTriggerNetwork object.
'ruleset' : Indicates the set of rules to be processed as
specified in the cmlrTriggerRuleset object.
'dpc' : Indicates that the destination point-code is
one of MTP3 trigger parameters. The DPC is
specified in the cmlrTriggerDpc object.
'opc' : Indicates that the origination point-code is
one of MTP3 trigger parameters. The OPC is
specified in the cmlrTriggerOpc object.
'opcMask': Indicates that the origination point-code is
qualified with a mask.
one of MTP3 trigger parameters. The OPC is
specified in the cmlrTriggerOpc object.
'si': Indicates that the service indicator has
been specified in the cmlrTriggerSi object
Parsed from file CISCO-ITP-MLR-MIB.mib
Module: CISCO-ITP-MLR-MIB
The following options define the source and
processing of triggers.
'block' : Indicates that message signal units will be
dropped when they match the specified trigger.
When sub-trigger(secondary triggers) exist
the option will be ignored.
'continue' : Indicates that message signal units will be
processed by the normal SCCP routing.
The continue, block and ruleset are mutually
exclusive.
'matchAll': Indicates the trigger will match all
message signal unit.
'cdpa' : Indicates that the trigger is found within
the SCCP called party address field(cdpa).
'cgpa' : Indicates that the trigger is found within
the SCCP calling party address field(cgpa).
'pc' : Indicates that the trigger will be matched if
it contains the specified point-code. The
point-code within the SCCP Cdpa or CgPa will
be inspected first. If the point code is not
present, then the DPC in the routing label is
used if CdPA, and the OPC is used for CgPA.
'gt' : Indicates that the Cgpa or CdPA trigger is to
be applied to packet when routing indicator
specifies global title translation(RI=GT).
'tt' : Indicates that the translation type has been
specified in the cmlrTriggerTransType object.
'gti' : Indicates that the global title indicator has
been specified in the cmlrTriggerGti
object.
'np' : Indicates that the numbering plan has been
specified in the cmlrTriggerNp object.
'nai : Indicates that the nature of specified address
has been specified in the cmlrTriggerNai object.
'ssn' : Indicates that the subsystem number has been
in the cmlrTriggerSsn object.
'network' : Indicates the network name has been specified
in the cmlrTriggerNetwork object.
'ruleset' : Indicates the set of rules to be processed as
specified in the cmlrTriggerRuleset object.
'dpc' : Indicates that the destination point-code is
one of MTP3 trigger parameters. The DPC is
specified in the cmlrTriggerDpc object.
'opc' : Indicates that the origination point-code is
one of MTP3 trigger parameters. The OPC is
specified in the cmlrTriggerOpc object.
'opcMask': Indicates that the origination point-code is
qualified with a mask.
one of MTP3 trigger parameters. The OPC is
specified in the cmlrTriggerOpc object.
'si': Indicates that the service indicator has
been specified in the cmlrTriggerSi object
The following options define the source and
processing of triggers.
'block' : Indicates that message signal units will be
dropped when they match the specified trigger.
When sub-trigger(secondary triggers) exist
the option will be ignored.
'continue' : Indicates that message signal units will be
processed by the normal SCCP routing.
The continue, block and ruleset are mutually
exclusive.
'matchAll': Indicates the trigger will match all
message signal unit.
'cdpa' : Indicates that the trigger is found within
the SCCP called party address field(cdpa).
'cgpa' : Indicates that the trigger is found within
the SCCP calling party address field(cgpa).
'pc' : Indicates that the trigger will be matched if
it contains the specified point-code. The
point-code within the SCCP Cdpa or CgPa will
be inspected first. If the point code is not
present, then the DPC in the routing label is
used if CdPA, and the OPC is used for CgPA.
'gt' : Indicates that the Cgpa or CdPA trigger is to
be applied to packet when routing indicator
specifies global title translation(RI=GT).
'tt' : Indicates that the translation type has been
specified in the cmlrTriggerTransType object.
'gti' : Indicates that the global title indicator has
been specified in the cmlrTriggerGti
object.
'np' : Indicates that the numbering plan has been
specified in the cmlrTriggerNp object.
'nai : Indicates that the nature of specified address
has been specified in the cmlrTriggerNai object.
'ssn' : Indicates that the subsystem number has been
in the cmlrTriggerSsn object.
'network' : Indicates the network name has been specified
in the cmlrTriggerNetwork object.
'ruleset' : Indicates the set of rules to be processed as
specified in the cmlrTriggerRuleset object.
'dpc' : Indicates that the destination point-code is
one of MTP3 trigger parameters. The DPC is
specified in the cmlrTriggerDpc object.
'opc' : Indicates that the origination point-code is
one of MTP3 trigger parameters. The OPC is
specified in the cmlrTriggerOpc object.
'opcMask': Indicates that the origination point-code is
qualified with a mask.
one of MTP3 trigger parameters. The OPC is
specified in the cmlrTriggerOpc object.
'si': Indicates that the service indicator has
been specified in the cmlrTriggerSi object
Parsed from file CISCO-ITP-MLR-MIB.my.txt
Company: None
Module: CISCO-ITP-MLR-MIB
The following options define the source and
processing of triggers.
'block' : Indicates that message signal units will be
dropped when they match the specified trigger.
When sub-trigger(secondary triggers) exist
the option will be ignored.
'continue' : Indicates that message signal units will be
processed by the normal SCCP routing.
The continue, block and ruleset are mutually
exclusive.
'matchAll': Indicates the trigger will match all
message signal unit.
'cdpa' : Indicates that the trigger is found within
the SCCP called party address field(cdpa).
'cgpa' : Indicates that the trigger is found within
the SCCP calling party address field(cgpa).
'pc' : Indicates that the trigger will be matched if
it contains the specified point-code. The
point-code within the SCCP Cdpa or CgPa will
be inspected first. If the point code is not
present, then the DPC in the routing label is
used if CdPA, and the OPC is used for CgPA.
'gt' : Indicates that the Cgpa or CdPA trigger is to
be applied to packet when routing indicator
specifies global title translation(RI=GT).
'tt' : Indicates that the translation type has been
specified in the cmlrTriggerTransType object.
'gti' : Indicates that the global title indicator has
been specified in the cmlrTriggerGti
object.
'np' : Indicates that the numbering plan has been
specified in the cmlrTriggerNp object.
'nai : Indicates that the nature of specified address
has been specified in the cmlrTriggerNai object.
'ssn' : Indicates that the subsystem number has been
in the cmlrTriggerSsn object.
'network' : Indicates the network name has been specified
in the cmlrTriggerNetwork object.
'ruleset' : Indicates the set of rules to be processed as
specified in the cmlrTriggerRuleset object.
'dpc' : Indicates that the destination point-code is
one of MTP3 trigger parameters. The DPC is
specified in the cmlrTriggerDpc object.
'opc' : Indicates that the origination point-code is
one of MTP3 trigger parameters. The OPC is
specified in the cmlrTriggerOpc object.
'opcMask': Indicates that the origination point-code is
qualified with a mask.
one of MTP3 trigger parameters. The OPC is
specified in the cmlrTriggerOpc object.
'si': Indicates that the service indicator has
been specified in the cmlrTriggerSi object
cmlrTriggerParameters OBJECT-TYPE SYNTAX BITS { block(0), continue(1), matchAll(2), cdpa(3), cgpa(4), pc(5), gt(6), tt(7), gti(8), np(9), nai(10), ssn(11), pid(12), network(13), ruleset(14), dpc(15), opc(16), opcMask(17), si(18) } MAX-ACCESS read-create STATUS current DESCRIPTION "The following options define the source and processing of triggers. 'block' : Indicates that message signal units will be dropped when they match the specified trigger. When sub-trigger(secondary triggers) exist the option will be ignored. 'continue' : Indicates that message signal units will be processed by the normal SCCP routing. The continue, block and ruleset are mutually exclusive. 'matchAll': Indicates the trigger will match all message signal unit. 'cdpa' : Indicates that the trigger is found within the SCCP called party address field(cdpa). 'cgpa' : Indicates that the trigger is found within the SCCP calling party address field(cgpa). 'pc' : Indicates that the trigger will be matched if it contains the specified point-code. The point-code within the SCCP Cdpa or CgPa will be inspected first. If the point code is not present, then the DPC in the routing label is used if CdPA, and the OPC is used for CgPA. 'gt' : Indicates that the Cgpa or CdPA trigger is to be applied to packet when routing indicator specifies global title translation(RI=GT). 'tt' : Indicates that the translation type has been specified in the cmlrTriggerTransType object. 'gti' : Indicates that the global title indicator has been specified in the cmlrTriggerGti object. 'np' : Indicates that the numbering plan has been specified in the cmlrTriggerNp object. 'nai : Indicates that the nature of specified address has been specified in the cmlrTriggerNai object. 'ssn' : Indicates that the subsystem number has been in the cmlrTriggerSsn object. 'network' : Indicates the network name has been specified in the cmlrTriggerNetwork object. 'ruleset' : Indicates the set of rules to be processed as specified in the cmlrTriggerRuleset object. 'dpc' : Indicates that the destination point-code is one of MTP3 trigger parameters. The DPC is specified in the cmlrTriggerDpc object. 'opc' : Indicates that the origination point-code is one of MTP3 trigger parameters. The OPC is specified in the cmlrTriggerOpc object. 'opcMask': Indicates that the origination point-code is qualified with a mask. one of MTP3 trigger parameters. The OPC is specified in the cmlrTriggerOpc object. 'si': Indicates that the service indicator has been specified in the cmlrTriggerSi object" DEFVAL { {} } ::= { cmlrTriggerTableEntry 3 }
cmlrTriggerParameters OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..3)) ACCESS read-write STATUS mandatory DESCRIPTION "The following options define the source and processing of triggers. 'block' : Indicates that message signal units will be dropped when they match the specified trigger. When sub-trigger(secondary triggers) exist the option will be ignored. 'continue' : Indicates that message signal units will be processed by the normal SCCP routing. The continue, block and ruleset are mutually exclusive. 'matchAll': Indicates the trigger will match all message signal unit. 'cdpa' : Indicates that the trigger is found within the SCCP called party address field(cdpa). 'cgpa' : Indicates that the trigger is found within the SCCP calling party address field(cgpa). 'pc' : Indicates that the trigger will be matched if it contains the specified point-code. The point-code within the SCCP Cdpa or CgPa will be inspected first. If the point code is not present, then the DPC in the routing label is used if CdPA, and the OPC is used for CgPA. 'gt' : Indicates that the Cgpa or CdPA trigger is to be applied to packet when routing indicator specifies global title translation(RI=GT). 'tt' : Indicates that the translation type has been specified in the cmlrTriggerTransType object. 'gti' : Indicates that the global title indicator has been specified in the cmlrTriggerGti object. 'np' : Indicates that the numbering plan has been specified in the cmlrTriggerNp object. 'nai : Indicates that the nature of specified address has been specified in the cmlrTriggerNai object. 'ssn' : Indicates that the subsystem number has been in the cmlrTriggerSsn object. 'network' : Indicates the network name has been specified in the cmlrTriggerNetwork object. 'ruleset' : Indicates the set of rules to be processed as specified in the cmlrTriggerRuleset object. 'dpc' : Indicates that the destination point-code is one of MTP3 trigger parameters. The DPC is specified in the cmlrTriggerDpc object. 'opc' : Indicates that the origination point-code is one of MTP3 trigger parameters. The OPC is specified in the cmlrTriggerOpc object. 'opcMask': Indicates that the origination point-code is qualified with a mask. one of MTP3 trigger parameters. The OPC is specified in the cmlrTriggerOpc object. 'si': Indicates that the service indicator has been specified in the cmlrTriggerSi object" DEFVAL { '000000'h } ::= { cmlrTriggerTableEntry 3 }
Vendor: Cisco
Module: CISCO-ITP-MLR-MIB
[Automatically extracted from oidview.com]
cmlrTriggerParameters OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..3)) ACCESS read-write STATUS mandatory DESCRIPTION "The following options define the source and processing of triggers. 'block' : Indicates that message signal units will be dropped when they match the specified trigger. When sub-trigger(secondary triggers) exist the option will be ignored. 'continue' : Indicates that message signal units will be processed by the normal SCCP routing. The continue, block and ruleset are mutually exclusive. 'matchAll': Indicates the trigger will match all message signal unit. 'cdpa' : Indicates that the trigger is found within the SCCP called party address field(cdpa). 'cgpa' : Indicates that the trigger is found within the SCCP calling party address field(cgpa). 'pc' : Indicates that the trigger will be matched if it contains the specified point-code. The point-code within the SCCP Cdpa or CgPa will be inspected first. If the point code is not present, then the DPC in the routing label is used if CdPA, and the OPC is used for CgPA. 'gt' : Indicates that the Cgpa or CdPA trigger is to be applied to packet when routing indicator specifies global title translation(RI=GT). 'tt' : Indicates that the translation type has been specified in the cmlrTriggerTransType object. 'gti' : Indicates that the global title indicator has been specified in the cmlrTriggerGti object. 'np' : Indicates that the numbering plan has been specified in the cmlrTriggerNp object. 'nai : Indicates that the nature of specified address has been specified in the cmlrTriggerNai object. 'ssn' : Indicates that the subsystem number has been in the cmlrTriggerSsn object. 'network' : Indicates the network name has been specified in the cmlrTriggerNetwork object. 'ruleset' : Indicates the set of rules to be processed as specified in the cmlrTriggerRuleset object. 'dpc' : Indicates that the destination point-code is one of MTP3 trigger parameters. The DPC is specified in the cmlrTriggerDpc object. 'opc' : Indicates that the origination point-code is one of MTP3 trigger parameters. The OPC is specified in the cmlrTriggerOpc object. 'opcMask': Indicates that the origination point-code is qualified with a mask. one of MTP3 trigger parameters. The OPC is specified in the cmlrTriggerOpc object. 'si': Indicates that the service indicator has been specified in the cmlrTriggerSi object" DEFVAL { '000000'h } ::= { cmlrTriggerTableEntry 3 }
cmlrTriggerParameters OBJECT-TYPE SYNTAX BITS { block(0), continue(1), matchAll(2), cdpa(3), cgpa(4), pc(5), gt(6), tt(7), gti(8), np(9), nai(10), ssn(11), pid(12), network(13), ruleset(14), dpc(15), opc(16), opcMask(17), si(18) } MAX-ACCESS read-create STATUS current DESCRIPTION "The following options define the source and processing of triggers. 'block' : Indicates that message signal units will be dropped when they match the specified trigger. When sub-trigger(secondary triggers) exist the option will be ignored. 'continue' : Indicates that message signal units will be processed by the normal SCCP routing. The continue, block and ruleset are mutually exclusive. 'matchAll': Indicates the trigger will match all message signal unit. 'cdpa' : Indicates that the trigger is found within the SCCP called party address field(cdpa). 'cgpa' : Indicates that the trigger is found within the SCCP calling party address field(cgpa). 'pc' : Indicates that the trigger will be matched if it contains the specified point-code. The point-code within the SCCP Cdpa or CgPa will be inspected first. If the point code is not present, then the DPC in the routing label is used if CdPA, and the OPC is used for CgPA. 'gt' : Indicates that the Cgpa or CdPA trigger is to be applied to packet when routing indicator specifies global title translation(RI=GT). 'tt' : Indicates that the translation type has been specified in the cmlrTriggerTransType object. 'gti' : Indicates that the global title indicator has been specified in the cmlrTriggerGti object. 'np' : Indicates that the numbering plan has been specified in the cmlrTriggerNp object. 'nai : Indicates that the nature of specified address has been specified in the cmlrTriggerNai object. 'ssn' : Indicates that the subsystem number has been in the cmlrTriggerSsn object. 'network' : Indicates the network name has been specified in the cmlrTriggerNetwork object. 'ruleset' : Indicates the set of rules to be processed as specified in the cmlrTriggerRuleset object. 'dpc' : Indicates that the destination point-code is one of MTP3 trigger parameters. The DPC is specified in the cmlrTriggerDpc object. 'opc' : Indicates that the origination point-code is one of MTP3 trigger parameters. The OPC is specified in the cmlrTriggerOpc object. 'opcMask': Indicates that the origination point-code is qualified with a mask. one of MTP3 trigger parameters. The OPC is specified in the cmlrTriggerOpc object. 'si': Indicates that the service indicator has been specified in the cmlrTriggerSi object" DEFVAL { {} } ::= { cmlrTriggerTableEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.396.1.2.1.1 | cmlrTableName | 0 | 0 | A name used to define a collection of multi-layer routing statements. |
| 1.3.6.1.4.1.9.9.396.1.2.1.2 | cmlrTriggerNumber | 0 | 0 | This object specifies the index for a list of triggers specified per routing table. |
| 1.3.6.1.4.1.9.9.396.1.2.1.4 | cmlrTriggerGt | 0 | 0 | The global title address to be matched when either the 'cdpa' or 'cgpa' bits are set in the cmlrTriggerParameters object. This o… |
| 1.3.6.1.4.1.9.9.396.1.2.1.5 | cmlrTriggerTransType | 0 | 0 | The translation type specified within the address in the message signal unit. This object will default to value based on variant… |
| 1.3.6.1.4.1.9.9.396.1.2.1.6 | cmlrTriggerGti | 0 | 0 | The global title indicator value for the global tile address specified within the message signal unit. This object will default t… |
| 1.3.6.1.4.1.9.9.396.1.2.1.7 | cmlrTriggerNp | 0 | 0 | The numbering plan of the specified global title address. This object will default to value based on variant unless the 'np' bit … |
| 1.3.6.1.4.1.9.9.396.1.2.1.8 | cmlrTriggerNai | 0 | 0 | Nature of Address Indicator (NAI) for GTT Selector. This object will default to value based on variant unless the 'nai' bit is s… |
| 1.3.6.1.4.1.9.9.396.1.2.1.9 | cmlrTriggerPc | 0 | 0 | The point-code in variant-specific format. This object only has meaning when the 'pc' bit is set in the cmlrTriggerParameters ob… |
| 1.3.6.1.4.1.9.9.396.1.2.1.10 | cmlrTriggerSsn | 0 | 0 | The subsystem number to be matched when the when the 'pc' bit is set in the cmlrTriggerParameters object. |
| 1.3.6.1.4.1.9.9.396.1.2.1.11 | cmlrTriggerDpc | 0 | 0 | The destination MTP3 point-code to be matched when the when the 'dpc' bit is set in the cmlrTriggerParameters object. |
| 1.3.6.1.4.1.9.9.396.1.2.1.12 | cmlrTriggerOpc | 0 | 0 | The origination MTP3 point-code to be matched when the when the 'opc' bit is set in the cmlrTriggerParameters object. |
| 1.3.6.1.4.1.9.9.396.1.2.1.13 | cmlrTriggerOpcMask | 0 | 0 | The origination MTP3 point-code mask to be applied in combination with cmlrTriggerOpc object. The mask will be applied when 'opc… |
| 1.3.6.1.4.1.9.9.396.1.2.1.14 | cmlrTriggerSi | 0 | 0 | The Service Indicator to be matched when the when the 'si' bit is set in the cmlrTriggerParameters object. |
| 1.3.6.1.4.1.9.9.396.1.2.1.15 | cmlrTriggerNetwork | 0 | 0 | The network name is used to indicate the network in which the ruleset will be invoked. This object only has meaning when the 'ne… |
| 1.3.6.1.4.1.9.9.396.1.2.1.16 | cmlrTriggerRuleset | 0 | 0 | Specifies the ruleset table that should be used if the trigger is matched and not overruled by a secondary trigger ruleset. This… |
| 1.3.6.1.4.1.9.9.396.1.2.1.17 | cmlrTriggerActive | 0 | 0 | This object indicates whether this trigger is active. The trigger will be active when the corresponding GTA entry exists and has … |
| 1.3.6.1.4.1.9.9.396.1.2.1.18 | cmlrTriggerStartDateAndTime | 0 | 0 | The local date and time when this trigger and sub-triggers will become active. When all bytes of octet string are set to zero th… |
| 1.3.6.1.4.1.9.9.396.1.2.1.19 | cmlrTriggerEndDateAndTime | 0 | 0 | The local date and time this trigger and sub-triggers will become inactive. When all bytes of octet string are set to zero then … |
| 1.3.6.1.4.1.9.9.396.1.2.1.20 | cmlTriggerPreliminaryMatchCounts | 0 | 0 | This counter indicates that a packet has matched the contents of the primary trigger. This counter indicates which triggers are … |
| 1.3.6.1.4.1.9.9.396.1.2.1.21 | cmlrTriggerMatchCounts | 0 | 0 | This counter indicates that a packet has matched the trigger and the result action was performed. When a primary trigger has seco… |
| 1.3.6.1.4.1.9.9.396.1.2.1.22 | cmlrTriggerRowStatus | 0 | 0 | The object is used by a management station to create or delete the row entry in cmlrTriggerTable following the RowStatus textual … |