This object displays the device capabilities with respect to
certain fields in Mediation Device table. This may be dependent
on hardware capabilities, software capabilities.
The following values may be supported:
ipV4SrcInterface: SNMP ifIndex Value may be used to select
the interface (denoted by
cTap2MediationSrcInterface) on the
intercepting device from which to
transmit intercepted data to an IPv4
address Mediation Device.
ipV6SrcInterface: SNMP ifIndex Value may be used to select
the interface (denoted by
cTap2MediationSrcInterface) on the
intercepting device from which to
transmit intercepted data to an IPv6
address Mediation Device.
udp: UDP may be used as transport protocol
(denoted by cTap2MediationTransport) in
transferring intercepted data to the
Mediation Device.
rtcpNack: RTP with Nack resilience may be used
as transport protocol (denoted by
cTap2MediationTransport) in transferring
intercepted data to the Mediation
Device.
tcp: TCP may be used as transport protocol
(denoted by cTap2MediationTransport) in
transferring intercepted data to the
Mediation Device.
sctp: SCTP may be used as transport protocol
(denoted by cTap2MediationTransport) in
transferring intercepted data to the
Mediation Device.
rtp: RTP may be used as transport protocol
(denoted by cTap2MediationTransport) in
transferring intercepted data to the
Mediation Device.
This object displays the device capabilities with respect to
certain fields in Mediation Device table. This may be dependent
on hardware capabilities, software capabilities.
The following values may be supported:
ipV4SrcInterface: SNMP ifIndex Value may be used to select
the interface (denoted by
cTap2MediationSrcInterface) on the
intercepting device from which to
transmit intercepted data to an IPv4
address Mediation Device.
ipV6SrcInterface: SNMP ifIndex Value may be used to select
the interface (denoted by
cTap2MediationSrcInterface) on the
intercepting device from which to
transmit intercepted data to an IPv6
address Mediation Device.
udp: UDP may be used as transport protocol
(denoted by cTap2MediationTransport) in
transferring intercepted data to the
Mediation Device.
rtcpNack: RTP with Nack resilience may be used
as transport protocol (denoted by
cTap2MediationTransport) in transferring
intercepted data to the Mediation
Device.
tcp: TCP may be used as transport protocol
(denoted by cTap2MediationTransport) in
transferring intercepted data to the
Mediation Device.
sctp: SCTP may be used as transport protocol
(denoted by cTap2MediationTransport) in
transferring intercepted data to the
Mediation Device.
rtp: RTP may be used as transport protocol
(denoted by cTap2MediationTransport) in
transferring intercepted data to the
Mediation Device.
Parsed from file CISCO-TAP2-MIB.my.txt
Company: None
Module: CISCO-TAP2-MIB
This object displays the device capabilities with respect to
certain fields in Mediation Device table. This may be dependent
on hardware capabilities, software capabilities.
The following values may be supported:
ipV4SrcInterface: SNMP ifIndex Value may be used to select
the interface (denoted by
cTap2MediationSrcInterface) on the
intercepting device from which to
transmit intercepted data to an IPv4
address Mediation Device.
ipV6SrcInterface: SNMP ifIndex Value may be used to select
the interface (denoted by
cTap2MediationSrcInterface) on the
intercepting device from which to
transmit intercepted data to an IPv6
address Mediation Device.
udp: UDP may be used as transport protocol
(denoted by cTap2MediationTransport) in
transferring intercepted data to the
Mediation Device.
rtcpNack: RTP with Nack resilience may be used
as transport protocol (denoted by
cTap2MediationTransport) in transferring
intercepted data to the Mediation
Device.
tcp: TCP may be used as transport protocol
(denoted by cTap2MediationTransport) in
transferring intercepted data to the
Mediation Device.
sctp: SCTP may be used as transport protocol
(denoted by cTap2MediationTransport) in
transferring intercepted data to the
Mediation Device.
rtp: RTP may be used as transport protocol
(denoted by cTap2MediationTransport) in
transferring intercepted data to the
Mediation Device.
Parsed from file CISCO-TAP2-MIB.mib
Module: CISCO-TAP2-MIB
cTap2MediationCapabilities OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) ACCESS read-only STATUS mandatory DESCRIPTION "This object displays the device capabilities with respect to certain fields in Mediation Device table. This may be dependent on hardware capabilities, software capabilities. The following values may be supported: ipV4SrcInterface: SNMP ifIndex Value may be used to select the interface (denoted by cTap2MediationSrcInterface) on the intercepting device from which to transmit intercepted data to an IPv4 address Mediation Device. ipV6SrcInterface: SNMP ifIndex Value may be used to select the interface (denoted by cTap2MediationSrcInterface) on the intercepting device from which to transmit intercepted data to an IPv6 address Mediation Device. udp: UDP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. rtcpNack: RTP with Nack resilience may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. tcp: TCP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. sctp: SCTP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. rtp: RTP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device." ::= { cTap2MediationGroup 3 }
Vendor: Cisco
Module: CISCO-TAP2-MIB
[Automatically extracted from oidview.com]
cTap2MediationCapabilities OBJECT-TYPE SYNTAX BITS { ipV4SrcInterface(0), ipV6SrcInterface(1), udp(2), rtpNack(3), tcp(4), sctp(5), rtp(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the device capabilities with respect to certain fields in Mediation Device table. This may be dependent on hardware capabilities, software capabilities. The following values may be supported: ipV4SrcInterface: SNMP ifIndex Value may be used to select the interface (denoted by cTap2MediationSrcInterface) on the intercepting device from which to transmit intercepted data to an IPv4 address Mediation Device. ipV6SrcInterface: SNMP ifIndex Value may be used to select the interface (denoted by cTap2MediationSrcInterface) on the intercepting device from which to transmit intercepted data to an IPv6 address Mediation Device. udp: UDP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. rtcpNack: RTP with Nack resilience may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. tcp: TCP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. sctp: SCTP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. rtp: RTP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device." ::= { cTap2MediationGroup 3 }
cTap2MediationCapabilities OBJECT-TYPE SYNTAX BITS { ipV4SrcInterface(0), ipV6SrcInterface(1), udp(2), rtpNack(3), tcp(4), sctp(5), rtp(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the device capabilities with respect to certain fields in Mediation Device table. This may be dependent on hardware capabilities, software capabilities. The following values may be supported: ipV4SrcInterface: SNMP ifIndex Value may be used to select the interface (denoted by cTap2MediationSrcInterface) on the intercepting device from which to transmit intercepted data to an IPv4 address Mediation Device. ipV6SrcInterface: SNMP ifIndex Value may be used to select the interface (denoted by cTap2MediationSrcInterface) on the intercepting device from which to transmit intercepted data to an IPv6 address Mediation Device. udp: UDP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. rtcpNack: RTP with Nack resilience may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. tcp: TCP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. sctp: SCTP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device. rtp: RTP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device." ::= { cTap2MediationGroup 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.399.1.1.3.0 | cTap2MediationCapabilities | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.399.1.1.1 | cTap2MediationNewIndex | 1 | 1 | This object contains a value which may be used as an index value for a new cTap2MediationEntry. Whenever read, the agent will cha… |
| 1.3.6.1.4.1.9.9.399.1.1.2 | cTap2MediationTable | 1 | 14 | This table lists the Mediation Devices with which the intercepting device communicates. These may be on the same or different Med… |