This table contains the port based VLAN-to-VLAN
associations for the device's physical ports.
The translation is applied in both ingress and egress
sides of the layer 2 trunk on the port. It causes the
traffic arriving on the VLAN cvtPortOriginalVlan on
this port to be mapped to or tagged with the VLAN
cvtPortTranslatedVlan. It also causes all the traffic
internally tagged with the VLAN cvtPortTranslatedVlan
and leaving the port to be tagged with VLAN
cvtPortOriginalVlan.
A VLAN translation configuration that is applied to
Layer 2 ports that are not Layer 2 trunks is inactive.
The port based VLAN translations are mutually exclusive
to the global VLAN translations. The rows in this
table can only be created when the table
cvtGlobalTranslationTable is empty.
A conceptual row is created for a translation on a
particular physical port which supports the feature.
The value of the corresponding instance of
cvtPortTranslationMax determines the maximum number
of rows for the same port.
On some platforms, VLAN translation may be configured
per port group rather than per port. If multiple ports
belong to a port group, the VLAN translation configured
to any of the ports in such group will apply to all
ports in the same group.
Parsed from file CISCO-VLAN-TRANSLATION-MIB.mib
Module: CISCO-VLAN-TRANSLATION-MIB
This table contains the port based VLAN-to-VLAN
associations for the device's physical ports.
The translation is applied in both ingress and egress
sides of the layer 2 trunk on the port. It causes the
traffic arriving on the VLAN cvtPortOriginalVlan on
this port to be mapped to or tagged with the VLAN
cvtPortTranslatedVlan. It also causes all the traffic
internally tagged with the VLAN cvtPortTranslatedVlan
and leaving the port to be tagged with VLAN
cvtPortOriginalVlan.
A VLAN translation configuration that is applied to
Layer 2 ports that are not Layer 2 trunks is inactive.
The port based VLAN translations are mutually exclusive
to the global VLAN translations. The rows in this
table can only be created when the table
cvtGlobalTranslationTable is empty.
A conceptual row is created for a translation on a
particular physical port which supports the feature.
The value of the corresponding instance of
cvtPortTranslationMax determines the maximum number
of rows for the same port.
On some platforms, VLAN translation may be configured
per port group rather than per port. If multiple ports
belong to a port group, the VLAN translation configured
to any of the ports in such group will apply to all
ports in the same group.
This table contains the port based VLAN-to-VLAN
associations for the device's physical ports.
The translation is applied in both ingress and egress
sides of the layer 2 trunk on the port. It causes the
traffic arriving on the VLAN cvtPortOriginalVlan on
this port to be mapped to or tagged with the VLAN
cvtPortTranslatedVlan. It also causes all the traffic
internally tagged with the VLAN cvtPortTranslatedVlan
and leaving the port to be tagged with VLAN
cvtPortOriginalVlan.
A VLAN translation configuration that is applied to
Layer 2 ports that are not Layer 2 trunks is inactive.
The port based VLAN translations are mutually exclusive
to the global VLAN translations. The rows in this
table can only be created when the table
cvtGlobalTranslationTable is empty.
A conceptual row is created for a translation on a
particular physical port which supports the feature.
The value of the corresponding instance of
cvtPortTranslationMax determines the maximum number
of rows for the same port.
On some platforms, VLAN translation may be configured
per port group rather than per port. If multiple ports
belong to a port group, the VLAN translation configured
to any of the ports in such group will apply to all
ports in the same group.
Parsed from file CISCO-VLAN-TRANSLATION-MIB.my.txt
Company: None
Module: CISCO-VLAN-TRANSLATION-MIB
This table contains the port based VLAN-to-VLAN
associations for the device's physical ports.
The translation is applied in both ingress and egress
sides of the layer 2 trunk on the port. It causes the
traffic arriving on the VLAN cvtPortOriginalVlan on
this port to be mapped to or tagged with the VLAN
cvtPortTranslatedVlan. It also causes all the traffic
internally tagged with the VLAN cvtPortTranslatedVlan
and leaving the port to be tagged with VLAN
cvtPortOriginalVlan.
A VLAN translation configuration that is applied to
Layer 2 ports that are not Layer 2 trunks is inactive.
The port based VLAN translations are mutually exclusive
to the global VLAN translations. The rows in this
table can only be created when the table
cvtGlobalTranslationTable is empty.
A conceptual row is created for a translation on a
particular physical port which supports the feature.
The value of the corresponding instance of
cvtPortTranslationMax determines the maximum number
of rows for the same port.
On some platforms, VLAN translation may be configured
per port group rather than per port. If multiple ports
belong to a port group, the VLAN translation configured
to any of the ports in such group will apply to all
ports in the same group.
cvtPortTranslationTable OBJECT-TYPE SYNTAX SEQUENCE OF CvtPortTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the port based VLAN-to-VLAN associations for the device's physical ports. The translation is applied in both ingress and egress sides of the layer 2 trunk on the port. It causes the traffic arriving on the VLAN cvtPortOriginalVlan on this port to be mapped to or tagged with the VLAN cvtPortTranslatedVlan. It also causes all the traffic internally tagged with the VLAN cvtPortTranslatedVlan and leaving the port to be tagged with VLAN cvtPortOriginalVlan. A VLAN translation configuration that is applied to Layer 2 ports that are not Layer 2 trunks is inactive. The port based VLAN translations are mutually exclusive to the global VLAN translations. The rows in this table can only be created when the table cvtGlobalTranslationTable is empty. A conceptual row is created for a translation on a particular physical port which supports the feature. The value of the corresponding instance of cvtPortTranslationMax determines the maximum number of rows for the same port. On some platforms, VLAN translation may be configured per port group rather than per port. If multiple ports belong to a port group, the VLAN translation configured to any of the ports in such group will apply to all ports in the same group." ::= { cvtPortBasedTranslation 2 }
cvtPortTranslationTable OBJECT-TYPE SYNTAX SEQUENCE OF CvtPortTranslationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the port based VLAN-to-VLAN associations for the device's physical ports. The translation is applied in both ingress and egress sides of the layer 2 trunk on the port. It causes the traffic arriving on the VLAN cvtPortOriginalVlan on this port to be mapped to or tagged with the VLAN cvtPortTranslatedVlan. It also causes all the traffic internally tagged with the VLAN cvtPortTranslatedVlan and leaving the port to be tagged with VLAN cvtPortOriginalVlan. A VLAN translation configuration that is applied to Layer 2 ports that are not Layer 2 trunks is inactive. The port based VLAN translations are mutually exclusive to the global VLAN translations. The rows in this table can only be created when the table cvtGlobalTranslationTable is empty. A conceptual row is created for a translation on a particular physical port which supports the feature. The value of the corresponding instance of cvtPortTranslationMax determines the maximum number of rows for the same port. On some platforms, VLAN translation may be configured per port group rather than per port. If multiple ports belong to a port group, the VLAN translation configured to any of the ports in such group will apply to all ports in the same group." ::= { cvtPortBasedTranslation 2 }
Vendor: Cisco
Module: CISCO-VLAN-TRANSLATION-MIB
[Automatically extracted from oidview.com]
cvtPortTranslationTable OBJECT-TYPE SYNTAX SEQUENCE OF CvtPortTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the port based VLAN-to-VLAN associations for the device's physical ports. The translation is applied in both ingress and egress sides of the layer 2 trunk on the port. It causes the traffic arriving on the VLAN cvtPortOriginalVlan on this port to be mapped to or tagged with the VLAN cvtPortTranslatedVlan. It also causes all the traffic internally tagged with the VLAN cvtPortTranslatedVlan and leaving the port to be tagged with VLAN cvtPortOriginalVlan. A VLAN translation configuration that is applied to Layer 2 ports that are not Layer 2 trunks is inactive. The port based VLAN translations are mutually exclusive to the global VLAN translations. The rows in this table can only be created when the table cvtGlobalTranslationTable is empty. A conceptual row is created for a translation on a particular physical port which supports the feature. The value of the corresponding instance of cvtPortTranslationMax determines the maximum number of rows for the same port. On some platforms, VLAN translation may be configured per port group rather than per port. If multiple ports belong to a port group, the VLAN translation configured to any of the ports in such group will apply to all ports in the same group." ::= { cvtPortBasedTranslation 2 }
cvtPortTranslationTable OBJECT-TYPE SYNTAX SEQUENCE OF CvtPortTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the port based VLAN-to-VLAN associations for the device's physical ports. The translation is applied in both ingress and egress sides of the layer 2 trunk on the port. It causes the traffic arriving on the VLAN cvtPortOriginalVlan on this port to be mapped to or tagged with the VLAN cvtPortTranslatedVlan. It also causes all the traffic internally tagged with the VLAN cvtPortTranslatedVlan and leaving the port to be tagged with VLAN cvtPortOriginalVlan. A VLAN translation configuration that is applied to Layer 2 ports that are not Layer 2 trunks is inactive. The port based VLAN translations are mutually exclusive to the global VLAN translations. The rows in this table can only be created when the table cvtGlobalTranslationTable is empty. A conceptual row is created for a translation on a particular physical port which supports the feature. The value of the corresponding instance of cvtPortTranslationMax determines the maximum number of rows for the same port. On some platforms, VLAN translation may be configured per port group rather than per port. If multiple ports belong to a port group, the VLAN translation configured to any of the ports in such group will apply to all ports in the same group." ::= { cvtPortBasedTranslation 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.411.1.2.2.1 | cvtPortTranslationEntry | 3 | 3 | Entry containing VLAN translation Information for a particular VLAN on a specific port. The entry is created and deleted by usin… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.411.1.2.1 | cvtPortConfigTable | 1 | 3 | This table contains information related to the port based VLAN translation on the device. |