This object represents the number of concurrent path discovery
requests that will be active at one time per MPLS VPN control
row. This object is meant for reducing the time for discovery
of all the paths to the target in a large customer network.
However its value should be chosen such that it does not cause
any performance impact.
Note: If the customer network has low end routers in the Core
it is recommended to keep this value low.
Parsed from file CISCO-RTTMON-MIB.mib
Module: CISCO-RTTMON-MIB
This object represents the number of concurrent path discovery
requests that will be active at one time per MPLS VPN control
row. This object is meant for reducing the time for discovery
of all the paths to the target in a large customer network.
However its value should be chosen such that it does not cause
any performance impact.
Note: If the customer network has low end routers in the Core
it is recommended to keep this value low.
This object represents the number of concurrent path discovery
requests that will be active at one time per MPLS VPN control
row. This object is meant for reducing the time for discovery
of all the paths to the target in a large customer network.
However its value should be chosen such that it does not cause
any performance impact.
Note: If the customer network has low end routers in the Core
it is recommended to keep this value low.
Parsed from file cisco-rttmon.mib.txt
Company: None
Module: CISCO-RTTMON-MIB
This object represents the number of concurrent path discovery
requests that will be active at one time per MPLS VPN control
row. This object is meant for reducing the time for discovery
of all the paths to the target in a large customer network.
However its value should be chosen such that it does not cause
any performance impact.
Note: If the customer network has low end routers in the Core
it is recommended to keep this value low.
rttMplsVpnMonTypeLpdMaxSessions OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the number of concurrent path discovery requests that will be active at one time per MPLS VPN control row. This object is meant for reducing the time for discovery of all the paths to the target in a large customer network. However its value should be chosen such that it does not cause any performance impact. Note: If the customer network has low end routers in the Core it is recommended to keep this value low." DEFVAL { 1 } ::= { rttMplsVpnMonTypeEntry 10 }
rttMplsVpnMonTypeLpdMaxSessions OBJECT-TYPE SYNTAX INTEGER(1..15) ACCESS read-write STATUS mandatory DESCRIPTION "This object represents the number of concurrent path discovery requests that will be active at one time per MPLS VPN control row. This object is meant for reducing the time for discovery of all the paths to the target in a large customer network. However its value should be chosen such that it does not cause any performance impact. Note: If the customer network has low end routers in the Core it is recommended to keep this value low." DEFVAL { 1 } ::= { rttMplsVpnMonTypeEntry 10 }
Vendor: Cisco
Module: CISCO-RTTMON-MIB
[Automatically extracted from oidview.com]
rttMplsVpnMonTypeLpdMaxSessions OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the number of concurrent path discovery requests that will be active at one time per MPLS VPN control row. This object is meant for reducing the time for discovery of all the paths to the target in a large customer network. However its value should be chosen such that it does not cause any performance impact. Note: If the customer network has low end routers in the Core it is recommended to keep this value low." DEFVAL { 1 } ::= { rttMplsVpnMonTypeEntry 10 }
rttMplsVpnMonTypeLpdMaxSessions OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the number of concurrent path discovery requests that will be active at one time per MPLS VPN control row. This object is meant for reducing the time for discovery of all the paths to the target in a large customer network. However its value should be chosen such that it does not cause any performance impact. Note: If the customer network has low end routers in the Core it is recommended to keep this value low." DEFVAL { 1 } ::= { rttMplsVpnMonTypeEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.42.1.2.16.1.1 | rttMplsVpnMonTypeInterval | 0 | 0 | This value represents the inter-packet delay between packets and is in milliseconds. This value is currently used for Jitter prob… |
| 1.3.6.1.4.1.9.9.42.1.2.16.1.2 | rttMplsVpnMonTypeNumPackets | 0 | 0 | This value represents the number of packets that need to be transmitted. This value is currently used for Jitter probe. This obje… |
| 1.3.6.1.4.1.9.9.42.1.2.16.1.3 | rttMplsVpnMonTypeDestPort | 0 | 0 | This object represents the target's port number to which the packets need to be sent. This value will be configured as target por… |
| 1.3.6.1.4.1.9.9.42.1.2.16.1.4 | rttMplsVpnMonTypeSecFreqType | 0 | 0 | This object specifies the reaction type for which the rttMplsVpnMonTypeSecFreqValue should be applied. The Value 'timeout' will c… |
| 1.3.6.1.4.1.9.9.42.1.2.16.1.5 | rttMplsVpnMonTypeSecFreqValue | 0 | 0 | This object represents the value that needs to be applied to secondary frequency of individual RTT operations configured by Auto … |
| 1.3.6.1.4.1.9.9.42.1.2.16.1.6 | rttMplsVpnMonTypeLspSelector | 0 | 0 | A string which specifies the address of the local host (127.X.X.X). This object will be used as lsp-selector in MPLS RTT operation… |
| 1.3.6.1.4.1.9.9.42.1.2.16.1.7 | rttMplsVpnMonTypeLSPReplyMode | 0 | 0 | This object specifies the reply mode for the LSP Echo requests originated by the operations configured by the Auto SAA L3 MPLS VP… |
| 1.3.6.1.4.1.9.9.42.1.2.16.1.8 | rttMplsVpnMonTypeLSPTTL | 0 | 0 | This object represents the TTL setting for MPLS echo request packets originated by the operations configured by the Auto SAA L3 M… |
| 1.3.6.1.4.1.9.9.42.1.2.16.1.9 | rttMplsVpnMonTypeLSPReplyDscp | 0 | 0 | This object specifies the DSCP value to be set in the IP header of the LSP echo reply packet. The value of this object will be in… |
| 1.3.6.1.4.1.9.9.42.1.2.16.1.11 | rttMplsVpnMonTypeLpdSessTimeout | 0 | 0 | This object specifies the maximum allowed duration of a particular tree trace request. If no response is received in configured t… |
| 1.3.6.1.4.1.9.9.42.1.2.16.1.12 | rttMplsVpnMonTypeLpdEchoTimeout | 0 | 0 | This object specifies the timeout value for the LSP echo requests which are sent while performing the LSP Path Discovery. |
| 1.3.6.1.4.1.9.9.42.1.2.16.1.13 | rttMplsVpnMonTypeLpdEchoInterval | 0 | 0 | This object specifies the send interval between LSP echo requests which are sent while performing the LSP Path Discovery. |
| 1.3.6.1.4.1.9.9.42.1.2.16.1.14 | rttMplsVpnMonTypeLpdEchoNullShim | 0 | 0 | This object specifies if the explicit-null label is added to LSP echo requests which are sent while performing the LSP Path Disco… |
| 1.3.6.1.4.1.9.9.42.1.2.16.1.15 | rttMplsVpnMonTypeLpdScanPeriod | 0 | 0 | This object specifies the scan time for the completion of LSP Path Discovery for all the PEs discovered for this control row. If … |
| 1.3.6.1.4.1.9.9.42.1.2.16.1.16 | rttMplsVpnMonTypeLpdStatHours | 0 | 0 | The maximum number of hours of data to be kept per LPD group. The LPD group statistics will be kept in an hourly bucket. At the m… |