This object specifies the type of LPD notifications to be
generated for the current Auto SAA L3 MPLS VPN control row.
This object will be applicable only when LSP Path Discovery is
enabled for this row.
There are two types of notifications supported for the LPD -
(a) rttMonLpdDiscoveryNotification - This notification will
be sent on the failure of LSP Path Discovery to the
particular PE. Reversal of the failure will also result in
sending the notification.
(b) rttMonLpdGrpStatusNotification - Individual probes in an LPD
group will not generate notifications independently but will
be generating dependent on the state of the group. Any
individual probe can initiate the generation of a
notification, dependent on the state of the group.
Notifications are only generated if the failure/restoration
of an individual probe causes the state of the group to
change.
The Value 'none' will not cause any notifications to be sent.
The Value 'lpdPathDiscovery' will cause (a) to be sent.
The Value 'lpdGroupStatus' will cause (b) to be sent.
The Value 'lpdAll' will cause both (a) and (b) to sent
depending on the failure conditions.
Parsed from file CISCO-RTTMON-MIB.mib
Module: CISCO-RTTMON-MIB
This object specifies the type of LPD notifications to be
generated for the current Auto SAA L3 MPLS VPN control row.
This object will be applicable only when LSP Path Discovery is
enabled for this row.
There are two types of notifications supported for the LPD -
(a) rttMonLpdDiscoveryNotification - This notification will
be sent on the failure of LSP Path Discovery to the
particular PE. Reversal of the failure will also result in
sending the notification.
(b) rttMonLpdGrpStatusNotification - Individual probes in an LPD
group will not generate notifications independently but will
be generating dependent on the state of the group. Any
individual probe can initiate the generation of a
notification, dependent on the state of the group.
Notifications are only generated if the failure/restoration
of an individual probe causes the state of the group to
change.
The Value 'none' will not cause any notifications to be sent.
The Value 'lpdPathDiscovery' will cause (a) to be sent.
The Value 'lpdGroupStatus' will cause (b) to be sent.
The Value 'lpdAll' will cause both (a) and (b) to sent
depending on the failure conditions.
This object specifies the type of LPD notifications to be
generated for the current Auto SAA L3 MPLS VPN control row.
This object will be applicable only when LSP Path Discovery is
enabled for this row.
There are two types of notifications supported for the LPD -
(a) rttMonLpdDiscoveryNotification - This notification will
be sent on the failure of LSP Path Discovery to the
particular PE. Reversal of the failure will also result in
sending the notification.
(b) rttMonLpdGrpStatusNotification - Individual probes in an LPD
group will not generate notifications independently but will
be generating dependent on the state of the group. Any
individual probe can initiate the generation of a
notification, dependent on the state of the group.
Notifications are only generated if the failure/restoration
of an individual probe causes the state of the group to
change.
The Value 'none' will not cause any notifications to be sent.
The Value 'lpdPathDiscovery' will cause (a) to be sent.
The Value 'lpdGroupStatus' will cause (b) to be sent.
The Value 'lpdAll' will cause both (a) and (b) to sent
depending on the failure conditions.
Parsed from file cisco-rttmon.mib.txt
Company: None
Module: CISCO-RTTMON-MIB
This object specifies the type of LPD notifications to be
generated for the current Auto SAA L3 MPLS VPN control row.
This object will be applicable only when LSP Path Discovery is
enabled for this row.
There are two types of notifications supported for the LPD -
(a) rttMonLpdDiscoveryNotification - This notification will
be sent on the failure of LSP Path Discovery to the
particular PE. Reversal of the failure will also result in
sending the notification.
(b) rttMonLpdGrpStatusNotification - Individual probes in an LPD
group will not generate notifications independently but will
be generating dependent on the state of the group. Any
individual probe can initiate the generation of a
notification, dependent on the state of the group.
Notifications are only generated if the failure/restoration
of an individual probe causes the state of the group to
change.
The Value 'none' will not cause any notifications to be sent.
The Value 'lpdPathDiscovery' will cause (a) to be sent.
The Value 'lpdGroupStatus' will cause (b) to be sent.
The Value 'lpdAll' will cause both (a) and (b) to sent
depending on the failure conditions.
rttMplsVpnMonReactLpdNotifyType OBJECT-TYPE SYNTAX INTEGER { none(1), lpdPathDiscovery(2), lpdGroupStatus(3), lpdAll(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the type of LPD notifications to be generated for the current Auto SAA L3 MPLS VPN control row. This object will be applicable only when LSP Path Discovery is enabled for this row. There are two types of notifications supported for the LPD - (a) rttMonLpdDiscoveryNotification - This notification will be sent on the failure of LSP Path Discovery to the particular PE. Reversal of the failure will also result in sending the notification. (b) rttMonLpdGrpStatusNotification - Individual probes in an LPD group will not generate notifications independently but will be generating dependent on the state of the group. Any individual probe can initiate the generation of a notification, dependent on the state of the group. Notifications are only generated if the failure/restoration of an individual probe causes the state of the group to change. The Value 'none' will not cause any notifications to be sent. The Value 'lpdPathDiscovery' will cause (a) to be sent. The Value 'lpdGroupStatus' will cause (b) to be sent. The Value 'lpdAll' will cause both (a) and (b) to sent depending on the failure conditions." DEFVAL { none } ::= { rttMplsVpnMonReactEntry 6 }
rttMplsVpnMonReactLpdNotifyType OBJECT-TYPE SYNTAX INTEGER { none(1), lpdPathDiscovery(2), lpdGroupStatus(3), lpdAll(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the type of LPD notifications to be generated for the current Auto SAA L3 MPLS VPN control row. This object will be applicable only when LSP Path Discovery is enabled for this row. There are two types of notifications supported for the LPD - (a) rttMonLpdDiscoveryNotification - This notification will be sent on the failure of LSP Path Discovery to the particular PE. Reversal of the failure will also result in sending the notification. (b) rttMonLpdGrpStatusNotification - Individual probes in an LPD group will not generate notifications independently but will be generating dependent on the state of the group. Any individual probe can initiate the generation of a notification, dependent on the state of the group. Notifications are only generated if the failure/restoration of an individual probe causes the state of the group to change. The Value 'none' will not cause any notifications to be sent. The Value 'lpdPathDiscovery' will cause (a) to be sent. The Value 'lpdGroupStatus' will cause (b) to be sent. The Value 'lpdAll' will cause both (a) and (b) to sent depending on the failure conditions." DEFVAL { none } ::= { rttMplsVpnMonReactEntry 6 }
Vendor: Cisco
Module: CISCO-RTTMON-MIB
[Automatically extracted from oidview.com]
rttMplsVpnMonReactLpdNotifyType OBJECT-TYPE SYNTAX INTEGER { none(1), lpdPathDiscovery(2), lpdGroupStatus(3), lpdAll(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the type of LPD notifications to be generated for the current Auto SAA L3 MPLS VPN control row. This object will be applicable only when LSP Path Discovery is enabled for this row. There are two types of notifications supported for the LPD - (a) rttMonLpdDiscoveryNotification - This notification will be sent on the failure of LSP Path Discovery to the particular PE. Reversal of the failure will also result in sending the notification. (b) rttMonLpdGrpStatusNotification - Individual probes in an LPD group will not generate notifications independently but will be generating dependent on the state of the group. Any individual probe can initiate the generation of a notification, dependent on the state of the group. Notifications are only generated if the failure/restoration of an individual probe causes the state of the group to change. The Value 'none' will not cause any notifications to be sent. The Value 'lpdPathDiscovery' will cause (a) to be sent. The Value 'lpdGroupStatus' will cause (b) to be sent. The Value 'lpdAll' will cause both (a) and (b) to sent depending on the failure conditions." DEFVAL { none } ::= { rttMplsVpnMonReactEntry 6 }
rttMplsVpnMonReactLpdNotifyType OBJECT-TYPE SYNTAX INTEGER { none(1), lpdPathDiscovery(2), lpdGroupStatus(3), lpdAll(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the type of LPD notifications to be generated for the current Auto SAA L3 MPLS VPN control row. This object will be applicable only when LSP Path Discovery is enabled for this row. There are two types of notifications supported for the LPD - (a) rttMonLpdDiscoveryNotification - This notification will be sent on the failure of LSP Path Discovery to the particular PE. Reversal of the failure will also result in sending the notification. (b) rttMonLpdGrpStatusNotification - Individual probes in an LPD group will not generate notifications independently but will be generating dependent on the state of the group. Any individual probe can initiate the generation of a notification, dependent on the state of the group. Notifications are only generated if the failure/restoration of an individual probe causes the state of the group to change. The Value 'none' will not cause any notifications to be sent. The Value 'lpdPathDiscovery' will cause (a) to be sent. The Value 'lpdGroupStatus' will cause (b) to be sent. The Value 'lpdAll' will cause both (a) and (b) to sent depending on the failure conditions." DEFVAL { none } ::= { rttMplsVpnMonReactEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.42.1.2.18.1.1 | rttMplsVpnMonReactConnectionEnable | 0 | 0 | The value set for this will be applied as rttMonReactAdminConnectionEnable for individual probes created by the Auto SAA L3 MPLS … |
| 1.3.6.1.4.1.9.9.42.1.2.18.1.2 | rttMplsVpnMonReactTimeoutEnable | 0 | 0 | The value set for this will be applied as rttMonReactAdminTimeoutEnable for individual probes created by the Auto SAA L3 MPLS VPN… |
| 1.3.6.1.4.1.9.9.42.1.2.18.1.3 | rttMplsVpnMonReactThresholdType | 0 | 0 | The value corresponding to this object will be applied as rttMonReactAdminThresholdType for individual probes created by the Auto… |
| 1.3.6.1.4.1.9.9.42.1.2.18.1.4 | rttMplsVpnMonReactThresholdCount | 0 | 0 | This object value will be applied as rttMonReactAdminThresholdCount for individual probes created by the Auto SAA L3 MPLS VPN. Thi… |
| 1.3.6.1.4.1.9.9.42.1.2.18.1.5 | rttMplsVpnMonReactActionType | 0 | 0 | The value corresponding to this object will be applied as rttMonReactAdminActionType of individual probes created by this Auto SA… |
| 1.3.6.1.4.1.9.9.42.1.2.18.1.7 | rttMplsVpnMonReactLpdRetryCount | 0 | 0 | This object value specifies the number of attempts to be performed before declaring the path as 'down'. Each 'single probe' which… |