This object specifies an IP protocol filter,
cippfIpProfileName
(defined in CISCO-IP-PROTOCOL-FILTER-MIB),
to be secured using this cryptomap entry.
When this object has a value of zero-length
string, this object is not valid/applicable.
Parsed from file CISCO-IPSEC-PROVISIONING-MIB.mib
Module: CISCO-IPSEC-PROVISIONING-MIB
This object specifies an IP protocol filter,
cippfIpProfileName
(defined in CISCO-IP-PROTOCOL-FILTER-MIB),
to be secured using this cryptomap entry.
When this object has a value of zero-length
string, this object is not valid/applicable.
This object specifies an IP protocol filter,
cippfIpProfileName
(defined in CISCO-IP-PROTOCOL-FILTER-MIB),
to be secured using this cryptomap entry.
When this object has a value of zero-length
string, this object is not valid/applicable.
Parsed from file CISCO-IPSEC-PROVISIONING-MIB.my.txt
Company: None
Module: CISCO-IPSEC-PROVISIONING-MIB
This object specifies an IP protocol filter,
cippfIpProfileName
(defined in CISCO-IP-PROTOCOL-FILTER-MIB),
to be secured using this cryptomap entry.
When this object has a value of zero-length
string, this object is not valid/applicable.
cipsStaticCryptomapIpFilter OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies an IP protocol filter, cippfIpProfileName (defined in CISCO-IP-PROTOCOL-FILTER-MIB), to be secured using this cryptomap entry. When this object has a value of zero-length string, this object is not valid/applicable. " ::= { cipsStaticCryptomapEntry 5 }
cipsStaticCryptomapIpFilter OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies an IP protocol filter, cippfIpProfileName (defined in CISCO-IP-PROTOCOL-FILTER-MIB), to be secured using this cryptomap entry. When this object has a value of zero-length string, this object is not valid/applicable." ::= { cipsStaticCryptomapEntry 5 }
Vendor: Cisco
Module: CISCO-IPSEC-PROVISIONING-MIB
[Automatically extracted from oidview.com]
cipsStaticCryptomapIpFilter OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies an IP protocol filter, cippfIpProfileName (defined in CISCO-IP-PROTOCOL-FILTER-MIB), to be secured using this cryptomap entry. When this object has a value of zero-length string, this object is not valid/applicable. " ::= { cipsStaticCryptomapEntry 5 }
cipsStaticCryptomapIpFilter OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies an IP protocol filter, cippfIpProfileName (defined in CISCO-IP-PROTOCOL-FILTER-MIB), to be secured using this cryptomap entry. When this object has a value of zero-length string, this object is not valid/applicable. " ::= { cipsStaticCryptomapEntry 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.431.1.4.3.1.1 | cipsStaticCryptomapSetName | 0 | 0 | The index of the static cryptomap table. The value of the string is the name string assigned by the NMS when defining a cryptomap… |
1.3.6.1.4.1.9.9.431.1.4.3.1.2 | cipsStaticCryptomapPriority | 0 | 0 | The priority of the cryptomap entry in the cryptomap set. A cryptomap entry with smaller cipsStaticCryptomapPriority value takes… |
1.3.6.1.4.1.9.9.431.1.4.3.1.3 | cipsStaticCryptomapType | 0 | 0 | The type of the cryptomap entry. This can be an ISAKMP cryptomap or manual. Dynamic cryptomaps are not counted in this table. |
1.3.6.1.4.1.9.9.431.1.4.3.1.4 | cipsStaticCryptomapDescr | 0 | 0 | The description string created by the SNMP agent while creating this cryptomap. The string generally identifies a description and… |
1.3.6.1.4.1.9.9.431.1.4.3.1.6 | cipsStaticCryptomapXformSetList | 0 | 0 | The list of cipsXformSetId that are members of this CipsStaticCryptomapEntry. The value of this object is a concatenation of zero… |
1.3.6.1.4.1.9.9.431.1.4.3.1.7 | cipsStaticCryptomapNumPeers | 0 | 0 | This object reflects the number of peers associated with this cryptomap entry. The other peers listed in table cipsIPsecCryMapPee… |
1.3.6.1.4.1.9.9.431.1.4.3.1.8 | cipsStaticCryotomapNextPIndex | 0 | 0 | This object specifies the next available index for object cipsCryMapPeerIndex which can be used for creating an entry in cipsIPse… |
1.3.6.1.4.1.9.9.431.1.4.3.1.9 | cipsStaticCryptomapCurPAddrType | 0 | 0 | This object represents the address type of cipsStaticCryptomapCurPAddr to which this cryptomap entry is currently connected. |
1.3.6.1.4.1.9.9.431.1.4.3.1.10 | cipsStaticCryptomapCurPAddr | 0 | 0 | The IP address of the peer to which this cryptomap entry is currently connected. The value of cipsStaticCryptomapCurPAddrType is '… |
1.3.6.1.4.1.9.9.431.1.4.3.1.11 | cipsStaticCryptomapPfs | 0 | 0 | This object identifies if the tunnels instantiated due to this policy item should use Perfect Forward Secrecy (PFS) and if so, wh… |
1.3.6.1.4.1.9.9.431.1.4.3.1.12 | cipsStaticCryptomapLifetime | 0 | 0 | This object specifies the lifetime of the IPsec Security Associations (SA) created using this IPsec policy entry. The default valu… |
1.3.6.1.4.1.9.9.431.1.4.3.1.13 | cipsStaticCryptomapLifesize | 0 | 0 | This object identifies the lifesize (maximum traffic in bytes that may be carried) of the IPSec SAs created using this IPSec poli… |
1.3.6.1.4.1.9.9.431.1.4.3.1.14 | cipsStaticCryptomapLevelHost | 0 | 0 | This object specifies the granularity of the IPSec SAs created using this IPSec policy entry. If this value is 'true', distinct S… |
1.3.6.1.4.1.9.9.431.1.4.3.1.15 | cipsStaticCryptomapIdleTimeout | 0 | 0 | This object specifies the idle time (lack of traffic) in seconds of a tunnel spawned by this cryptomap after which the tunnel wil… |
1.3.6.1.4.1.9.9.431.1.4.3.1.16 | cipsStaticCryptomapAutoPeer | 0 | 0 | If 'true' the destination address is taken as the peer address, while creating the tunnel. If 'false' the value shown by the obje… |
1.3.6.1.4.1.9.9.431.1.4.3.1.17 | cipsStaticCryptomapStatus | 0 | 0 | This object identifies the status of the cryptomap entry represented by this conceptual row. |