The reason for the failure. Possible reasons
include:
1 = other
2 = internal error occurred
3 = peer encoding error
4 = proposal failure
5 = protocol use failure
6 = non-existent security association
7 = decryption failure
8 = encryption failure
9 = inbound authentication failure
10 = outbound authentication failure
11 = compression failure
12 = system capacity failure
13 = peer delete request was received
14 = contact with peer was lost
15 = sequence number rolled over
16 = operator requested termination.
Parsed from file CISCO-ENHANCED-IPSEC-FLOW-MIB.mib
Module: CISCO-ENHANCED-IPSEC-FLOW-MIB
The reason for the failure. Possible reasons
include:
1 = other
2 = internal error occurred
3 = peer encoding error
4 = proposal failure
5 = protocol use failure
6 = non-existent security association
7 = decryption failure
8 = encryption failure
9 = inbound authentication failure
10 = outbound authentication failure
11 = compression failure
12 = system capacity failure
13 = peer delete request was received
14 = contact with peer was lost
15 = sequence number rolled over
16 = operator requested termination
17 = performance utilization exceeding the threshold.
The reason for the failure. Possible reasons
include:
1 = other
2 = internal error occurred
3 = peer encoding error
4 = proposal failure
5 = protocol use failure
6 = non-existent security association
7 = decryption failure
8 = encryption failure
9 = inbound authentication failure
10 = outbound authentication failure
11 = compression failure
12 = system capacity failure
13 = peer delete request was received
14 = contact with peer was lost
15 = sequence number rolled over
16 = operator requested termination.
Parsed from file CISCO-ENHANCED-IPSEC-FLOW-MIB.my.txt
Company: None
Module: CISCO-ENHANCED-IPSEC-FLOW-MIB
The reason for the failure. Possible reasons
include:
1 = other
2 = internal error occurred
3 = peer encoding error
4 = proposal failure
5 = protocol use failure
6 = non-existent security association
7 = decryption failure
8 = encryption failure
9 = inbound authentication failure
10 = outbound authentication failure
11 = compression failure
12 = system capacity failure
13 = peer delete request was received
14 = contact with peer was lost
15 = sequence number rolled over
16 = operator requested termination
17 = performance utilization exceeding the threshold.
ceipSecFailReason OBJECT-TYPE SYNTAX INTEGER{ other(1), internalError(2), peerEncodingError(3), proposalFailure(4), protocolUseFail(5), nonExistentSa(6), decryptFailure(7), encryptFailure(8), inAuthFailure(9), outAuthFailure(10), compression(11), sysCapExceeded(12), peerDelRequest(13), peerLost(14), seqNumRollOver(15), operRequest(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason for the failure. Possible reasons include: 1 = other 2 = internal error occurred 3 = peer encoding error 4 = proposal failure 5 = protocol use failure 6 = non-existent security association 7 = decryption failure 8 = encryption failure 9 = inbound authentication failure 10 = outbound authentication failure 11 = compression failure 12 = system capacity failure 13 = peer delete request was received 14 = contact with peer was lost 15 = sequence number rolled over 16 = operator requested termination." ::= { ceipSecFailEntry 2 }
ceipSecFailReason OBJECT-TYPE SYNTAX INTEGER { other(1), internalError(2), peerEncodingError(3), proposalFailure(4), protocolUseFail(5), nonExistentSa(6), decryptFailure(7), encryptFailure(8), inAuthFailure(9), outAuthFailure(10), compression(11), sysCapExceeded(12), peerDelRequest(13), peerLost(14), seqNumRollOver(15), operRequest(16), performanceUtilization(17) } ACCESS read-only STATUS mandatory DESCRIPTION "The reason for the failure. Possible reasons include: 1 = other 2 = internal error occurred 3 = peer encoding error 4 = proposal failure 5 = protocol use failure 6 = non-existent security association 7 = decryption failure 8 = encryption failure 9 = inbound authentication failure 10 = outbound authentication failure 11 = compression failure 12 = system capacity failure 13 = peer delete request was received 14 = contact with peer was lost 15 = sequence number rolled over 16 = operator requested termination 17 = performance utilization exceeding the threshold." ::= { ceipSecFailEntry 2 }
Vendor: Cisco
Module: CISCO-ENHANCED-IPSEC-FLOW-MIB
[Automatically extracted from oidview.com]
ceipSecFailReason OBJECT-TYPE SYNTAX INTEGER { other(1), internalError(2), peerEncodingError(3), proposalFailure(4), protocolUseFail(5), nonExistentSa(6), decryptFailure(7), encryptFailure(8), inAuthFailure(9), outAuthFailure(10), compression(11), sysCapExceeded(12), peerDelRequest(13), peerLost(14), seqNumRollOver(15), operRequest(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason for the failure. Possible reasons include: 1 = other 2 = internal error occurred 3 = peer encoding error 4 = proposal failure 5 = protocol use failure 6 = non-existent security association 7 = decryption failure 8 = encryption failure 9 = inbound authentication failure 10 = outbound authentication failure 11 = compression failure 12 = system capacity failure 13 = peer delete request was received 14 = contact with peer was lost 15 = sequence number rolled over 16 = operator requested termination." ::= { ceipSecFailEntry 2 }
ceipSecFailReason OBJECT-TYPE SYNTAX INTEGER { other(1), internalError(2), peerEncodingError(3), proposalFailure(4), protocolUseFail(5), nonExistentSa(6), decryptFailure(7), encryptFailure(8), inAuthFailure(9), outAuthFailure(10), compression(11), sysCapExceeded(12), peerDelRequest(13), peerLost(14), seqNumRollOver(15), operRequest(16), performanceUtilization(17) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason for the failure. Possible reasons include: 1 = other 2 = internal error occurred 3 = peer encoding error 4 = proposal failure 5 = protocol use failure 6 = non-existent security association 7 = decryption failure 8 = encryption failure 9 = inbound authentication failure 10 = outbound authentication failure 11 = compression failure 12 = system capacity failure 13 = peer delete request was received 14 = contact with peer was lost 15 = sequence number rolled over 16 = operator requested termination 17 = performance utilization exceeding the threshold." ::= { ceipSecFailEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.432.1.3.2.1.1 | ceipSecFailIndex | 0 | 0 | The IPsec Phase-2 Failure Table index. The value of the index is a number which begins at one and is incremented with each IPsec P… |
| 1.3.6.1.4.1.9.9.432.1.3.2.1.3 | ceipSecFailTime | 0 | 0 | The value of sysUpTime in hundredths of seconds at the time of the failure. |
| 1.3.6.1.4.1.9.9.432.1.3.2.1.4 | ceipSecFailTunnelIndex | 0 | 0 | The Phase-2 Tunnel index (ceipSecTunIndex). If this conceptual row corresponds to an operation failure (that is, the failure of a… |
| 1.3.6.1.4.1.9.9.432.1.3.2.1.5 | ceipSecFailSaSpi | 0 | 0 | The security association SPI value. If this conceptual row corresponds to a setup failure (failure to establish the tunnel), the v… |
| 1.3.6.1.4.1.9.9.432.1.3.2.1.6 | ceipSecFailPktSrcAddressType | 0 | 0 | The type of the packet's source IP address. |
| 1.3.6.1.4.1.9.9.432.1.3.2.1.7 | ceipSecFailPktSrcAddress | 0 | 0 | The packet's source IP address. |
| 1.3.6.1.4.1.9.9.432.1.3.2.1.8 | ceipSecFailPktDstAddressType | 0 | 0 | The type of the packet's destination IP address. |
| 1.3.6.1.4.1.9.9.432.1.3.2.1.9 | ceipSecFailPktDstAddress | 0 | 0 | The packet's destination IP address. |