Represents the discovered list of all IP networks
connected to the gigabit ethernet interfaces in
the fabric.
The entries in this table are populated by the discovery
process started either by the auto discovery mechanism
or triggered by the user by the setting the
cIpNetworkDiscoveryCommand object to 'all' or
'interfaceSpecific'.
Parsed from file CISCO-IP-NW-DISCOVERY-MIB.mib
Module: CISCO-IP-NW-DISCOVERY-MIB
This object is used to facilitate modification of
ciscoIsnsIpNetToDiscover,ciscoIsnsGigEInterfaceToDiscover
and ciscoIsnsIpNetDiscoveryCommand objects by multiple
managers.
The procedure for modifying the above three objects are
as follows:
1. For IP network specific discovery, determine the new
values for 'ciscoIsnsIpNetToDiscover' object.
And For interface specific discovery, determine the new
value for 'ciscoIsnsGigEInterfaceToDiscover' object.
2. Retrieve the value of 'ciscoIsnsIpNetDiscoverySpinLock'
object.
3. For IP network specific discovery,
Set the value of 'ciscoIsnsIpNetDiscoverySpinLock'
object to the retrieved value, and (in the same PDU)
the value of 'ciscoIsnsIpNetToDiscover' object to the
new value. If the set fails for the
'ciscoIsnsIpNetDiscoverySpinLock' object, go back to
step 2.
For Interface specific discovery,
Set the value of 'ciscoIsnsIpNetDiscoverySpinLock'
object to the retrieved value, and (in the same PDU)
the value of 'ciscoIsnsGigEInterfaceToDiscover' to the
new value. If the set fails for the
'ciscoIsnsIpNetDiscoverySpinLock' object, go back to
step 2.
4. Set the value of 'ciscoIsnsIpNetDiscoverySpinLock'
object to the retrieved value incremented by two, and
(in the same PDU) the value of
'ciscoIsnsIpNetDiscoveryCommand' object to
'ipNetworkSpecific' or 'interfaceSpecific'.
If the set fails for 'ciscoIsnsIpNetDiscoverySpinLock'
object go back to step 2.
Note that if it's possible to include
'ciscoIsnsIpNetDiscoveryCommand' object in the
(Set Request) PDU of an earlier step, then step 4 ,
can be eliminated.
This object is used to facilitate modification of
ciscoIsnsIpNetToDiscover,ciscoIsnsGigEInterfaceToDiscover
and ciscoIsnsIpNetDiscoveryCommand objects by multiple
managers.
The procedure for modifying the above three objects are
as follows:
1. For IP network specific discovery, determine the new
values for 'ciscoIsnsIpNetToDiscover' object.
And For interface specific discovery, determine the new
value for 'ciscoIsnsGigEInterfaceToDiscover' object.
2. Retrieve the value of 'ciscoIsnsIpNetDiscoverySpinLock'
object.
3. For IP network specific discovery,
Set the value of 'ciscoIsnsIpNetDiscoverySpinLock'
object to the retrieved value, and (in the same PDU)
the value of 'ciscoIsnsIpNetToDiscover' object to the
new value. If the set fails for the
'ciscoIsnsIpNetDiscoverySpinLock' object, go back to
step 2.
For Interface specific discovery,
Set the value of 'ciscoIsnsIpNetDiscoverySpinLock'
object to the retrieved value, and (in the same PDU)
the value of 'ciscoIsnsGigEInterfaceToDiscover' to the
new value. If the set fails for the
'ciscoIsnsIpNetDiscoverySpinLock' object, go back to
step 2.
4. Set the value of 'ciscoIsnsIpNetDiscoverySpinLock'
object to the retrieved value incremented by two, and
(in the same PDU) the value of
'ciscoIsnsIpNetDiscoveryCommand' object to
'ipNetworkSpecific' or 'interfaceSpecific'.
If the set fails for 'ciscoIsnsIpNetDiscoverySpinLock'
object go back to step 2.
Note that if it's possible to include
'ciscoIsnsIpNetDiscoveryCommand' object in the
(Set Request) PDU of an earlier step, then step 4 ,
can be eliminated.
Parsed from file CISCO-ISNS-IP-NW-DISCOVERY-MIB.my.txt
Company: None
Module: CISCO-ISNS-IP-NW-DISCOVERY-MIB
Represents the discovered list of all IP networks
connected to the gigabit ethernet interfaces in
the fabric.
The entries in this table are populated by the discovery
process started either by the auto discovery mechanism
or triggered by the user by the setting the
cIpNetworkDiscoveryCommand object to 'all' or
'interfaceSpecific'.
cIpNetworkTable OBJECT-TYPE SYNTAX SEQUENCE OF CIpNetworkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the discovered list of all IP networks connected to the gigabit ethernet interfaces in the fabric. The entries in this table are populated by the discovery process started either by the auto discovery mechanism or triggered by the user by the setting the cIpNetworkDiscoveryCommand object to 'all' or 'interfaceSpecific'." ::= { cIpNetworkDiscoveryInfo 1 }
ciscoIsnsIpNetDiscoverySpinLock OBJECT-TYPE SYNTAX TestAndIncr ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to facilitate modification of ciscoIsnsIpNetToDiscover,ciscoIsnsGigEInterfaceToDiscover and ciscoIsnsIpNetDiscoveryCommand objects by multiple managers. The procedure for modifying the above three objects are as follows: 1. For IP network specific discovery, determine the new values for 'ciscoIsnsIpNetToDiscover' object. And For interface specific discovery, determine the new value for 'ciscoIsnsGigEInterfaceToDiscover' object. 2. Retrieve the value of 'ciscoIsnsIpNetDiscoverySpinLock' object. 3. For IP network specific discovery, Set the value of 'ciscoIsnsIpNetDiscoverySpinLock' object to the retrieved value, and (in the same PDU) the value of 'ciscoIsnsIpNetToDiscover' object to the new value. If the set fails for the 'ciscoIsnsIpNetDiscoverySpinLock' object, go back to step 2. For Interface specific discovery, Set the value of 'ciscoIsnsIpNetDiscoverySpinLock' object to the retrieved value, and (in the same PDU) the value of 'ciscoIsnsGigEInterfaceToDiscover' to the new value. If the set fails for the 'ciscoIsnsIpNetDiscoverySpinLock' object, go back to step 2. 4. Set the value of 'ciscoIsnsIpNetDiscoverySpinLock' object to the retrieved value incremented by two, and (in the same PDU) the value of 'ciscoIsnsIpNetDiscoveryCommand' object to 'ipNetworkSpecific' or 'interfaceSpecific'. If the set fails for 'ciscoIsnsIpNetDiscoverySpinLock' object go back to step 2. Note that if it's possible to include 'ciscoIsnsIpNetDiscoveryCommand' object in the (Set Request) PDU of an earlier step, then step 4 , can be eliminated." ::= { ciscoIsnsIpNetDiscoveryMIBConfig 1 }
Vendor: Cisco
Module: CISCO-IP-NW-DISCOVERY-MIB
[Automatically extracted from oidview.com]
ciscoIsnsIpNetDiscoverySpinLock OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to facilitate modification of ciscoIsnsIpNetToDiscover,ciscoIsnsGigEInterfaceToDiscover and ciscoIsnsIpNetDiscoveryCommand objects by multiple managers. The procedure for modifying the above three objects are as follows: 1. For IP network specific discovery, determine the new values for 'ciscoIsnsIpNetToDiscover' object. And For interface specific discovery, determine the new value for 'ciscoIsnsGigEInterfaceToDiscover' object. 2. Retrieve the value of 'ciscoIsnsIpNetDiscoverySpinLock' object. 3. For IP network specific discovery, Set the value of 'ciscoIsnsIpNetDiscoverySpinLock' object to the retrieved value, and (in the same PDU) the value of 'ciscoIsnsIpNetToDiscover' object to the new value. If the set fails for the 'ciscoIsnsIpNetDiscoverySpinLock' object, go back to step 2. For Interface specific discovery, Set the value of 'ciscoIsnsIpNetDiscoverySpinLock' object to the retrieved value, and (in the same PDU) the value of 'ciscoIsnsGigEInterfaceToDiscover' to the new value. If the set fails for the 'ciscoIsnsIpNetDiscoverySpinLock' object, go back to step 2. 4. Set the value of 'ciscoIsnsIpNetDiscoverySpinLock' object to the retrieved value incremented by two, and (in the same PDU) the value of 'ciscoIsnsIpNetDiscoveryCommand' object to 'ipNetworkSpecific' or 'interfaceSpecific'. If the set fails for 'ciscoIsnsIpNetDiscoverySpinLock' object go back to step 2. Note that if it's possible to include 'ciscoIsnsIpNetDiscoveryCommand' object in the (Set Request) PDU of an earlier step, then step 4 , can be eliminated." ::= { ciscoIsnsIpNetDiscoveryMIBConfig 1 }
cIpNetworkTable OBJECT-TYPE SYNTAX SEQUENCE OF CIpNetworkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the discovered list of all IP networks connected to the gigabit ethernet interfaces in the fabric. The entries in this table are populated by the discovery process started either by the auto discovery mechanism or triggered by the user by the setting the cIpNetworkDiscoveryCommand object to 'all' or 'interfaceSpecific'." ::= { cIpNetworkDiscoveryInfo 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.434.1.2.1.0 | ciscoIsnsIpNetDiscoverySpinLock | 0 | 0 | None |
1.3.6.1.4.1.9.9.434.1.2.1.1 | cIpNetworkEntry | 2 | 2 | An entry represents the information about an IP network connected to the gigabit ethernet interface in the fabric. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.434.1.2.2 | cIpNetworkInterfaceTable, ciscoIsnsIpNetToDiscover | 2 | 6 | A table consisting of entries for all the gigabit ethernet interfaces, which are connected to the various IP networks in the Fabr… |
1.3.6.1.4.1.9.9.434.1.2.3 | ciscoIsnsGigEInterfaceToDiscover | 1 | 1 | This object represents the 'ifIndex' of the specified gigabit ethernet interface for which the IP network discovery needs to be d… |
1.3.6.1.4.1.9.9.434.1.2.4 | ciscoIsnsIpNetDiscoveryCommand | 1 | 1 | The IP network discovery command to be executed. Command Remarks all Run IP network discovery for… |
1.3.6.1.4.1.9.9.434.1.2.5 | ciscoIsnsIpNetDiscoveryCmdStatus | 1 | 1 | The status of the last IP network discovery command operation. success (1) - IP network discovery operation completed successfully… |