The reason for the failure. Possible reasons
include:
1 = other
2 = peer delete request was received
3 = contact with peer was lost
4 = local failure occurred
5 = authentication failure
6 = hash validation failure
7 = encryption failure
8 = internal error occurred
9 = system capacity failure
10 = proposal failure
11 = peer's certificate is unavailable
12 = peer's certificate was found invalid
13 = local certificate expired
14 = certificate revoke list (crl) failure
15 = peer encoding error
16 = Reference to a non-existent control tunnel
17 = Extended User authentication failed
18 = operator requested termination.
19 = An attempt to establish a tunnel was aborted
by the admission control policy (this could
include a simple policy that limits the maximum
active tunnels)
20 = A protocol specific reason (look in the
protocol-specific MIB for more info).
Parsed from file CISCO-IPSEC-SIGNALING-MIB.mib
Module: CISCO-IPSEC-SIGNALING-MIB
The reason for the failure. Possible reasons
include:
1 = other
2 = peer delete request was received
3 = contact with peer was lost
4 = local failure occurred
5 = authentication failure
6 = hash validation failure
7 = encryption failure
8 = internal error occurred
9 = system capacity failure
10 = proposal failure
11 = peer's certificate is unavailable
12 = peer's certificate was found invalid
13 = local certificate expired
14 = certificate revoke list (crl) failure
15 = peer encoding error
16 = Reference to a non-existent control tunnel
17 = Extended User authentication failed
18 = operator requested termination.
19 = An attempt to establish a tunnel was aborted
by the admission control policy (this could
include a simple policy that limits the maximum
active tunnels)
20 = A protocol specific reason (look in the
protocol-specific MIB for more info).
The reason for the failure. Possible reasons
include:
1 = other
2 = peer delete request was received
3 = contact with peer was lost
4 = local failure occurred
5 = authentication failure
6 = hash validation failure
7 = encryption failure
8 = internal error occurred
9 = system capacity failure
10 = proposal failure
11 = peer's certificate is unavailable
12 = peer's certificate was found invalid
13 = local certificate expired
14 = certificate revoke list (crl) failure
15 = peer encoding error
16 = Reference to a non-existent control tunnel
17 = Extended User authentication failed
18 = operator requested termination.
19 = An attempt to establish a tunnel was aborted
by the admission control policy (this could
include a simple policy that limits the maximum
active tunnels)
20 = A protocol specific reason (look in the
protocol-specific MIB for more info).
Parsed from file CISCO-IPSEC-SIGNALING-MIB.my.txt
Company: None
Module: CISCO-IPSEC-SIGNALING-MIB
The reason for the failure. Possible reasons
include:
1 = other
2 = peer delete request was received
3 = contact with peer was lost
4 = local failure occurred
5 = authentication failure
6 = hash validation failure
7 = encryption failure
8 = internal error occurred
9 = system capacity failure
10 = proposal failure
11 = peer's certificate is unavailable
12 = peer's certificate was found invalid
13 = local certificate expired
14 = certificate revoke list (crl) failure
15 = peer encoding error
16 = Reference to a non-existent control tunnel
17 = Extended User authentication failed
18 = operator requested termination.
19 = An attempt to establish a tunnel was aborted
by the admission control policy (this could
include a simple policy that limits the maximum
active tunnels)
20 = A protocol specific reason (look in the
protocol-specific MIB for more info).
cisgIpsSgFailReason OBJECT-TYPE SYNTAX INTEGER{ other(1), peerDelRequest(2), peerLost(3), localFailure(4), authFailure(5), hashValidation(6), encryptFailure(7), internalError(8), sysCapExceeded(9), proposalFailure(10), peerCertUnavailable(11), peerCertNotValid(12), localCertExpired(13), crlFailure(14), peerEncodingError(15), nonExistentSa(16), userAuthFailure(17), operRequest(18), deniedByAdmissionControl(19), protocolSpecific(20) } MAX-ACCESS read-only STATUS current DESCRIPTION " The reason for the failure. Possible reasons include: 1 = other 2 = peer delete request was received 3 = contact with peer was lost 4 = local failure occurred 5 = authentication failure 6 = hash validation failure 7 = encryption failure 8 = internal error occurred 9 = system capacity failure 10 = proposal failure 11 = peer's certificate is unavailable 12 = peer's certificate was found invalid 13 = local certificate expired 14 = certificate revoke list (crl) failure 15 = peer encoding error 16 = Reference to a non-existent control tunnel 17 = Extended User authentication failed 18 = operator requested termination. 19 = An attempt to establish a tunnel was aborted by the admission control policy (this could include a simple policy that limits the maximum active tunnels) 20 = A protocol specific reason (look in the protocol-specific MIB for more info). " ::= { cisgIpsSgFailEntry 2 }
cisgIpsSgFailReason OBJECT-TYPE SYNTAX INTEGER { other(1), peerDelRequest(2), peerLost(3), localFailure(4), authFailure(5), hashValidation(6), encryptFailure(7), internalError(8), sysCapExceeded(9), proposalFailure(10), peerCertUnavailable(11), peerCertNotValid(12), localCertExpired(13), crlFailure(14), peerEncodingError(15), nonExistentSa(16), userAuthFailure(17), operRequest(18), deniedByAdmissionControl(19), protocolSpecific(20) } ACCESS read-only STATUS mandatory DESCRIPTION " The reason for the failure. Possible reasons include: 1 = other 2 = peer delete request was received 3 = contact with peer was lost 4 = local failure occurred 5 = authentication failure 6 = hash validation failure 7 = encryption failure 8 = internal error occurred 9 = system capacity failure 10 = proposal failure 11 = peer's certificate is unavailable 12 = peer's certificate was found invalid 13 = local certificate expired 14 = certificate revoke list (crl) failure 15 = peer encoding error 16 = Reference to a non-existent control tunnel 17 = Extended User authentication failed 18 = operator requested termination. 19 = An attempt to establish a tunnel was aborted by the admission control policy (this could include a simple policy that limits the maximum active tunnels) 20 = A protocol specific reason (look in the protocol-specific MIB for more info)." ::= { cisgIpsSgFailEntry 2 }
Vendor: Cisco
Module: CISCO-IPSEC-SIGNALING-MIB
[Automatically extracted from oidview.com]
cisgIpsSgFailReason OBJECT-TYPE SYNTAX INTEGER{ other(1), peerDelRequest(2), peerLost(3), localFailure(4), authFailure(5), hashValidation(6), encryptFailure(7), internalError(8), sysCapExceeded(9), proposalFailure(10), peerCertUnavailable(11), peerCertNotValid(12), localCertExpired(13), crlFailure(14), peerEncodingError(15), nonExistentSa(16), userAuthFailure(17), operRequest(18), deniedByAdmissionControl(19), protocolSpecific(20) } MAX-ACCESS read-only STATUS current DESCRIPTION " The reason for the failure. Possible reasons include: 1 = other 2 = peer delete request was received 3 = contact with peer was lost 4 = local failure occurred 5 = authentication failure 6 = hash validation failure 7 = encryption failure 8 = internal error occurred 9 = system capacity failure 10 = proposal failure 11 = peer's certificate is unavailable 12 = peer's certificate was found invalid 13 = local certificate expired 14 = certificate revoke list (crl) failure 15 = peer encoding error 16 = Reference to a non-existent control tunnel 17 = Extended User authentication failed 18 = operator requested termination. 19 = An attempt to establish a tunnel was aborted by the admission control policy (this could include a simple policy that limits the maximum active tunnels) 20 = A protocol specific reason (look in the protocol-specific MIB for more info). " ::= { cisgIpsSgFailEntry 2 }
cisgIpsSgFailReason OBJECT-TYPE SYNTAX INTEGER{ other(1), peerDelRequest(2), peerLost(3), localFailure(4), authFailure(5), hashValidation(6), encryptFailure(7), internalError(8), sysCapExceeded(9), proposalFailure(10), peerCertUnavailable(11), peerCertNotValid(12), localCertExpired(13), crlFailure(14), peerEncodingError(15), nonExistentSa(16), userAuthFailure(17), operRequest(18), deniedByAdmissionControl(19), protocolSpecific(20) } MAX-ACCESS read-only STATUS current DESCRIPTION " The reason for the failure. Possible reasons include: 1 = other 2 = peer delete request was received 3 = contact with peer was lost 4 = local failure occurred 5 = authentication failure 6 = hash validation failure 7 = encryption failure 8 = internal error occurred 9 = system capacity failure 10 = proposal failure 11 = peer's certificate is unavailable 12 = peer's certificate was found invalid 13 = local certificate expired 14 = certificate revoke list (crl) failure 15 = peer encoding error 16 = Reference to a non-existent control tunnel 17 = Extended User authentication failed 18 = operator requested termination. 19 = An attempt to establish a tunnel was aborted by the admission control policy (this could include a simple policy that limits the maximum active tunnels) 20 = A protocol specific reason (look in the protocol-specific MIB for more info). " ::= { cisgIpsSgFailEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.438.1.4.2.1.1 | cisgIpsSgFailIndex | 0 | 0 | The Phase-1 Failure Table index. This object has no relationship to the cisgIpsSgTunIndex of the tunnel when it was active. The va… |
| 1.3.6.1.4.1.9.9.438.1.4.2.1.3 | cisgIpsSgFailTime | 0 | 0 | The value of sysUpTime in hundredths of seconds at the time of the failure. |
| 1.3.6.1.4.1.9.9.438.1.4.2.1.4 | cisgIpsSgFailLocalType | 0 | 0 | The type of local peer identity. |
| 1.3.6.1.4.1.9.9.438.1.4.2.1.5 | cisgIpsSgFailLocalValue | 0 | 0 | The value of the local peer identity. |
| 1.3.6.1.4.1.9.9.438.1.4.2.1.6 | cisgIpsSgFailRemoteType | 0 | 0 | The type of remote peer identity. |
| 1.3.6.1.4.1.9.9.438.1.4.2.1.7 | cisgIpsSgFailRemoteValue | 0 | 0 | The value of the remote peer identity. |
| 1.3.6.1.4.1.9.9.438.1.4.2.1.8 | cisgIpsSgFailLocalAddress | 0 | 0 | The address of the local peer. The value of cisgIpsSgFailLocalType identifies the type of the address contained in this object. |
| 1.3.6.1.4.1.9.9.438.1.4.2.1.9 | cisgIpsSgFailRemoteAddress | 0 | 0 | The address of the remote peer. The value of cisgIpsSgFailLocalType identifies the type of the address contained in this object. |