Reference record for OID 1.3.6.1.4.1.9.9.445.1.2.1

parent

1.3.6.1.4.1.9.9.445.1.2 (cqvTranslation)

node code

1

node name

cqvTranslationTable

dot oid

1.3.6.1.4.1.9.9.445.1.2.1

type

OBJECT-TYPE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoQinqVlanMIB(445) ciscoQinqVlanMIBObjects(1) cqvTranslation(2) cqvTranslationTable(1)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoQinqVlanMIB(445) ciscoQinqVlanMIBObjects(1) cqvTranslation(2) cqvTranslationTable(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoQinqVlanMIB(445) ciscoQinqVlanMIBObjects(1) cqvTranslation(2) cqvTranslationTable(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoQinqVlanMIB(445) ciscoQinqVlanMIBObjects(1) cqvTranslation(2) cqvTranslationTable(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoQinqVlanMIB(445) ciscoQinqVlanMIBObjects(1) cqvTranslation(2) cqvTranslationTable(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoQinqVlanMIB(445) ciscoQinqVlanMIBObjects(1) cqvTranslation(2) cqvTranslationTable(1)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoQinqVlanMIB/ciscoQinqVlanMIBObjects/cqvTranslation/cqvTranslationTable

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoQinqVlanMIB/ciscoQinqVlanMIBObjects/cqvTranslation/cqvTranslationTable

/iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoQinqVlanMIB/ciscoQinqVlanMIBObjects/cqvTranslation/cqvTranslationTable

/iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoQinqVlanMIB/ciscoQinqVlanMIBObjects/cqvTranslation/cqvTranslationTable

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoQinqVlanMIB/ciscoQinqVlanMIBObjects/cqvTranslation/cqvTranslationTable

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoQinqVlanMIB/ciscoQinqVlanMIBObjects/cqvTranslation/cqvTranslationTable

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/9/9/445/1/2/1

Description by circitor

This table defines the translations performed on QinQ capable
interfaces.

The ifIndex in the INDEX clause identifies the QinQ interface.

A QinQ interface performs the following translations:

- Double Tagged to Single Tagged - the inner and outer tags of
the frames internal to the switch are replaced with a single
trunk VLAN tag when the outgoing frame is transmitted.

- Double Tagged to Double Tagged - the outer tag of the frames
internal to the switch are replaced with an outer trunk
VLAN tag when the outgoing frame is transmitted. The inner
tag remains unchanged in the transmitted frame.

The following picture illustrates QinQ translations.

<

Switch
+
| |
| +
| | Double Tagged | | QinQ | | Single or Double |
| | Frames |
| +
| |
+

Also, the QinQ interface sets the IEEE 802.1P prioritization
bits (P bits) in the outgoing frames by copying the P bits
either from the internal frame's outer or inner VLAN tag.

A management application can create a conceptual row in this
table by setting the cqvTranslationRowStatus to
'createAndWait' or 'createAndGo'.

A conceptual row in this table cannot be modified while
cqvTranslationRowStatus is set to 'active'.

Parsed from file CISCO-QINQ-VLAN-MIB.mib
Module: CISCO-QINQ-VLAN-MIB

Description by cisco_v1

This table defines the translations performed on QinQ capable
interfaces.

The ifIndex in the INDEX clause identifies the QinQ interface.

A QinQ interface performs the following translations:

- Double Tagged to Single Tagged - the inner and outer tags of
the frames internal to the switch are replaced with a single
trunk VLAN tag when the outgoing frame is transmitted.

- Double Tagged to Double Tagged - the outer tag of the frames
internal to the switch are replaced with an outer trunk
VLAN tag when the outgoing frame is transmitted. The inner
tag remains unchanged in the transmitted frame.

The following picture illustrates QinQ translations.

<

Switch
+
| |
| +
| | Double Tagged | | QinQ | | Single or Double |
| | Frames |
| +
| |
+

Also, the QinQ interface sets the IEEE 802.1P prioritization
bits (P bits) in the outgoing frames by copying the P bits
either from the internal frame's outer or inner VLAN tag.

A management application can create a conceptual row in this
table by setting the cqvTranslationRowStatus to
'createAndWait' or 'createAndGo'.

A conceptual row in this table cannot be modified while
cqvTranslationRowStatus is set to 'active'.

Description by mibdepot

This table defines the translations performed on QinQ capable
interfaces.

The ifIndex in the INDEX clause identifies the QinQ interface.

A QinQ interface performs the following translations:

- Double Tagged to Single Tagged - the inner and outer tags of
the frames internal to the switch are replaced with a single
trunk VLAN tag when the outgoing frame is transmitted.

- Double Tagged to Double Tagged - the outer tag of the frames
internal to the switch are replaced with an outer trunk
VLAN tag when the outgoing frame is transmitted. The inner
tag remains unchanged in the transmitted frame.

The following picture illustrates QinQ translations.

<

Switch
+
| |
| +
| | Double Tagged | | QinQ | | Single or Double |
| | Frames |
| +
| |
+

Also, the QinQ interface sets the IEEE 802.1P prioritization
bits (P bits) in the outgoing frames by copying the P bits
either from the internal frame's outer or inner VLAN tag.

A management application can create a conceptual row in this
table by setting the cqvTranslationRowStatus to
'createAndWait' or 'createAndGo'.

A conceptual row in this table cannot be modified while
cqvTranslationRowStatus is set to 'active'.

Parsed from file CISCO-QINQ-VLAN-MIB.my.txt
Company: None
Module: CISCO-QINQ-VLAN-MIB

Description by cisco

This table defines the translations performed on QinQ capable
interfaces.

The ifIndex in the INDEX clause identifies the QinQ interface.

A QinQ interface performs the following translations:

- Double Tagged to Single Tagged - the inner and outer tags of
the frames internal to the switch are replaced with a single
trunk VLAN tag when the outgoing frame is transmitted.

- Double Tagged to Double Tagged - the outer tag of the frames
internal to the switch are replaced with an outer trunk
VLAN tag when the outgoing frame is transmitted. The inner
tag remains unchanged in the transmitted frame.

The following picture illustrates QinQ translations.

<

Switch
+
| |
| +
| | Double Tagged | | QinQ | | Single or Double |
| | Frames |
| +
| |
+

Also, the QinQ interface sets the IEEE 802.1P prioritization
bits (P bits) in the outgoing frames by copying the P bits
either from the internal frame's outer or inner VLAN tag.

A management application can create a conceptual row in this
table by setting the cqvTranslationRowStatus to
'createAndWait' or 'createAndGo'.

A conceptual row in this table cannot be modified while
cqvTranslationRowStatus is set to 'active'.

Information by circitor

cqvTranslationTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CqvTranslationEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table defines the translations performed on QinQ capable
        interfaces.

        The ifIndex in the INDEX clause identifies the QinQ interface.

        A QinQ interface performs the following translations:

        - Double Tagged to Single Tagged - the inner and outer tags of
          the frames internal to the switch are replaced with a single
          trunk VLAN tag when the outgoing frame is transmitted.

        - Double Tagged to Double Tagged - the outer tag of the frames
          internal to the switch are replaced with an outer trunk
          VLAN tag when the outgoing frame is transmitted.  The inner
          tag remains unchanged in the transmitted frame.

        The following picture illustrates QinQ translations.

               <

                     Switch
        +
        |                                |
        |  +
        |  | Double Tagged |     |  QinQ |     | Single or Double |
        |  | Frames        | 
        |  +
        |                                |
        +

        Also, the QinQ interface sets the IEEE 802.1P prioritization
        bits (P bits) in the outgoing frames by copying the P bits
        either from the internal frame's outer or inner VLAN tag.

        A management application can create a conceptual row in this
        table by setting the cqvTranslationRowStatus to
        'createAndWait' or 'createAndGo'.

        A conceptual row in this table cannot be modified while
        cqvTranslationRowStatus is set to 'active'."
    ::= { cqvTranslation 1 }

Information by cisco_v1

cqvTranslationTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CqvTranslationEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table defines the translations performed on QinQ capable
        interfaces.
        
        The ifIndex in the INDEX clause identifies the QinQ interface.
        
        A QinQ interface performs the following translations:
        
        - Double Tagged to Single Tagged - the inner and outer tags of
          the frames internal to the switch are replaced with a single
          trunk VLAN tag when the outgoing frame is transmitted.
        
        - Double Tagged to Double Tagged - the outer tag of the frames
          internal to the switch are replaced with an outer trunk
          VLAN tag when the outgoing frame is transmitted.  The inner
          tag remains unchanged in the transmitted frame.
        
        The following picture illustrates QinQ translations.
        
               <
        
                     Switch
        +
        |                                |
        |  +
        |  | Double Tagged |     |  QinQ |     | Single or Double |
        |  | Frames        | 
        |  +
        |                                |
        +
        
        Also, the QinQ interface sets the IEEE 802.1P prioritization
        bits (P bits) in the outgoing frames by copying the P bits
        either from the internal frame's outer or inner VLAN tag.
        
        A management application can create a conceptual row in this
        table by setting the cqvTranslationRowStatus to
        'createAndWait' or 'createAndGo'.
        
        A conceptual row in this table cannot be modified while
        cqvTranslationRowStatus is set to 'active'."
    ::= { cqvTranslation 1 }

Information by oid_info

Vendor: Cisco
Module: CISCO-QINQ-VLAN-MIB

[Automatically extracted from oidview.com]

Information by mibdepot

cqvTranslationTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CqvTranslationEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table defines the translations performed on QinQ capable
        interfaces.

        The ifIndex in the INDEX clause identifies the QinQ interface.

        A QinQ interface performs the following translations:

        - Double Tagged to Single Tagged - the inner and outer tags of
          the frames internal to the switch are replaced with a single
          trunk VLAN tag when the outgoing frame is transmitted.

        - Double Tagged to Double Tagged - the outer tag of the frames
          internal to the switch are replaced with an outer trunk
          VLAN tag when the outgoing frame is transmitted.  The inner
          tag remains unchanged in the transmitted frame.

        The following picture illustrates QinQ translations.

               <

                     Switch
        +
        |                                |
        |  +
        |  | Double Tagged |     |  QinQ |     | Single or Double |
        |  | Frames        | 
        |  +
        |                                |
        +

        Also, the QinQ interface sets the IEEE 802.1P prioritization
        bits (P bits) in the outgoing frames by copying the P bits
        either from the internal frame's outer or inner VLAN tag.

        A management application can create a conceptual row in this
        table by setting the cqvTranslationRowStatus to
        'createAndWait' or 'createAndGo'.

        A conceptual row in this table cannot be modified while
        cqvTranslationRowStatus is set to 'active'."
    ::= { cqvTranslation 1 }

Information by cisco

cqvTranslationTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CqvTranslationEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table defines the translations performed on QinQ capable
        interfaces.

        The ifIndex in the INDEX clause identifies the QinQ interface.

        A QinQ interface performs the following translations:

        - Double Tagged to Single Tagged - the inner and outer tags of
          the frames internal to the switch are replaced with a single
          trunk VLAN tag when the outgoing frame is transmitted.

        - Double Tagged to Double Tagged - the outer tag of the frames
          internal to the switch are replaced with an outer trunk
          VLAN tag when the outgoing frame is transmitted.  The inner
          tag remains unchanged in the transmitted frame.

        The following picture illustrates QinQ translations.

               <

                     Switch
        +
        |                                |
        |  +
        |  | Double Tagged |     |  QinQ |     | Single or Double |
        |  | Frames        | 
        |  +
        |                                |
        +

        Also, the QinQ interface sets the IEEE 802.1P prioritization
        bits (P bits) in the outgoing frames by copying the P bits
        either from the internal frame's outer or inner VLAN tag.

        A management application can create a conceptual row in this
        table by setting the cqvTranslationRowStatus to
        'createAndWait' or 'createAndGo'.

        A conceptual row in this table cannot be modified while
        cqvTranslationRowStatus is set to 'active'."
    ::= { cqvTranslation 1 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Children (1)