The status of the physical interface. The value of this
object is only valid when the interface's ifAdminStatus
has the value 'up'. Note that some of the enumerated
values are specific to a particular physical layer.
Parsed from file CISCO-ATM-IF-PHYS-MIB.mib
Module: CISCO-ATM-IF-PHYS-MIB
The status of the physical interface. The value of this
object is only valid when the interface's ifAdminStatus
has the value 'up'. Note that some of the enumerated
values are specific to a particular physical layer.
The status of the physical interface. The value of this
object is only valid when the interface's ifAdminStatus
has the value 'up'. Note that some of the enumerated
values are specific to a particular physical layer.
Parsed from file CISCO-ATM-IF-PHYS-MIB.my.txt
Company: None
Module: CISCO-ATM-IF-PHYS-MIB
The status of the physical interface. The value of this
object is only valid when the interface's ifAdminStatus
has the value 'up'. Note that some of the enumerated
values are specific to a particular physical layer.
ciscoAtmIfPhysStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), los(2), lof(3), loc(4), ais(5), yellowLine(6), yellowPath(7), lop(8), idle(9), yellowAlarm(10), plcpLOF(11), plcpYellow(12), maFERF(13), pathAis(14), ocd(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the physical interface. The value of this object is only valid when the interface's ifAdminStatus has the value 'up'. Note that some of the enumerated values are specific to a particular physical layer." ::= { ciscoAtmIfPhysEntry 1 }
ciscoAtmIfPhysStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), los(2), lof(3), loc(4), ais(5), yellowLine(6), yellowPath(7), lop(8), idle(9), yellowAlarm(10), plcpLOF(11), plcpYellow(12), maFERF(13), pathAis(14), ocd(15) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the physical interface. The value of this object is only valid when the interface's ifAdminStatus has the value 'up'. Note that some of the enumerated values are specific to a particular physical layer." ::= { ciscoAtmIfPhysEntry 1 }
Vendor: Cisco
Module: CISCO-ATM-IF-PHYS-MIB
[Automatically extracted from oidview.com]
ciscoAtmIfPhysStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), los(2), lof(3), loc(4), ais(5), yellowLine(6), yellowPath(7), lop(8), idle(9), yellowAlarm(10), plcpLOF(11), plcpYellow(12), maFERF(13), pathAis(14), ocd(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the physical interface. The value of this object is only valid when the interface's ifAdminStatus has the value 'up'. Note that some of the enumerated values are specific to a particular physical layer." ::= { ciscoAtmIfPhysEntry 1 }
ciscoAtmIfPhysStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), los(2), lof(3), loc(4), ais(5), yellowLine(6), yellowPath(7), lop(8), idle(9), yellowAlarm(10), plcpLOF(11), plcpYellow(12), maFERF(13), pathAis(14), ocd(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the physical interface. The value of this object is only valid when the interface's ifAdminStatus has the value 'up'. Note that some of the enumerated values are specific to a particular physical layer." ::= { ciscoAtmIfPhysEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.45.1.1.1.2 | ciscoAtmIfPhysSectionParityErrors | 0 | 0 | The number of B1 (BIP) errors on the physical interface. This object is only present for SONET interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.3 | ciscoAtmIfPhysLineParityErrors | 0 | 0 | The number of B2 (BIP) errors on the physical interface. This object is only present for SONET interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.4 | ciscoAtmIfPhysPathParityErrors | 0 | 0 | The number of B3 (BIP) errors on the physical interface. This object is only present for SONET interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.5 | ciscoAtmIfPhysLcvErrors | 0 | 0 | The number of Line Code Violation errors on the physical interface. This object is only present for DS3/E3/DS1/E1 interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.6 | ciscoAtmIfPhysCBitParityErrors | 0 | 0 | The number of C-bit parity violations on the physical interface. This object is only present for DS3 interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.7 | ciscoAtmIfPhysPBitParityErrors | 0 | 0 | The number of P-bit parity violations or E3 G.832 BIP-8 errors on the physical interface. This object is present only for DS3/E3… |
| 1.3.6.1.4.1.9.9.45.1.1.1.8 | ciscoAtmIfPhysPlcpBipViolations | 0 | 0 | The number of PLCP BIP violations on the physical interface. This object is only present for DS3/E3/DS1/E1 interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.9 | ciscoAtmIfPhysLineFebeErrors | 0 | 0 | The number of Z2 (Line FEBE) errors on the physical interface. This object is only present for SONET interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.10 | ciscoAtmIfPhysPathFebeErrors | 0 | 0 | The number of G1 (Path FEBE) errors on the physical interface. This object is only present for SONET interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.11 | ciscoAtmIfPhysCellPayloadScrambling | 0 | 0 | The status of whether cell payload scrambling is enabled or disabled on the physical interface. |
| 1.3.6.1.4.1.9.9.45.1.1.1.12 | ciscoAtmIfPhysStsStreamScrambling | 0 | 0 | The status of whether STS-stream scrambling is enabled or disabled on the physical interface. |
| 1.3.6.1.4.1.9.9.45.1.1.1.13 | ciscoAtmIfPhysFramingMode | 0 | 0 | The framing format present on the physical interface. 'sonet' indicates sts-3c or sts-12c format and applies only to OC-3 and OC-… |
| 1.3.6.1.4.1.9.9.45.1.1.1.14 | ciscoAtmIfPhysLoopbackConfig | 0 | 0 | The loopback configured on the physical interface: 'noLoop' indicates no loopback is present. 'diagnosticLoop' indicates transmit… |
| 1.3.6.1.4.1.9.9.45.1.1.1.15 | ciscoAtmIfPhysLineBuildOut | 0 | 0 | The line buildout configured on the transmit signal: 'e3AllCables' applies to all cables of E3 physical interfaces. 'ds3CablesUnde… |
| 1.3.6.1.4.1.9.9.45.1.1.1.16 | ciscoAtmIfPhysTransmitClockSource | 0 | 0 | The source of the tranmit clock: 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'freeRunni… |
| 1.3.6.1.4.1.9.9.45.1.1.1.17 | ciscoAtmIfPhysClockSourcePriority | 0 | 0 | The priority of this interface if configured as a network clock source. 'notConfigured' indicates this is not configured as a netw… |
| 1.3.6.1.4.1.9.9.45.1.1.1.18 | ciscoAtmIfPhysClockSourceStatus | 0 | 0 | The network clock source status of this interface: 'notSelected' indicates this is not selected as the network clock source. 'sele… |
| 1.3.6.1.4.1.9.9.45.1.1.1.19 | ciscoAtmIfPhysDS1BitErrors | 0 | 0 | The number of bit errors (CRC-6 error in ESF mode and framing bit error in SF mode) on the physical interface. This object is on… |
| 1.3.6.1.4.1.9.9.45.1.1.1.20 | ciscoAtmIfPhysE1CrcErrors | 0 | 0 | The number of CRC errors (in CRC-4 mode) on the physical interface. This object is only present for E1 interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.21 | ciscoAtmIfPhysLineCode | 0 | 0 | The line coding present on the physical interface This object is only present for DS1/E1 interfaces. 'ami' indicates alternate m… |