Reference record for OID 1.3.6.1.4.1.9.9.46.1.4.1.1.4



parent
1.3.6.1.4.1.9.9.46.1.4.1.1 (vtpEditControlEntry)
node code
4
node name
vtpVlanEditConfigRevNumber
dot oid
1.3.6.1.4.1.9.9.46.1.4.1.1.4
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoVtpMIB(46) vtpMIBObjects(1) vlanEdit(4) vtpEditControlTable(1) vtpEditControlEntry(1) vtpVlanEditConfigRevNumber(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoVtpMIB(46) vtpMIBObjects(1) vlanEdit(4) vtpEditControlTable(1) vtpEditControlEntry(1) vtpVlanEditConfigRevNumber(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoVtpMIB(46) vtpMIBObjects(1) vlanEdit(4) vtpEditControlTable(1) vtpEditControlEntry(1) vtpVlanEditConfigRevNumber(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoVtpMIB(46) vtpMIBObjects(1) vlanEdit(4) vtpEditControlTable(1) vtpEditControlEntry(1) vtpVlanEditConfigRevNumber(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoVtpMIB(46) vtpMIBObjects(1) vlanEdit(4) vtpEditControlTable(1) vtpEditControlEntry(1) vtpVlanEditConfigRevNumber(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoVtpMIB(46) vtpMIBObjects(1) vlanEdit(4) vtpEditControlTable(1) vtpEditControlEntry(1) vtpVlanEditConfigRevNumber(4)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoVtpMIB/vtpMIBObjects/vlanEdit/vtpEditControlTable/vtpEditControlEntry/vtpVlanEditConfigRevNumber
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoVtpMIB/vtpMIBObjects/vlanEdit/vtpEditControlTable/vtpEditControlEntry/vtpVlanEditConfigRevNumber
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoVtpMIB/vtpMIBObjects/vlanEdit/vtpEditControlTable/vtpEditControlEntry/vtpVlanEditConfigRevNumber
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoVtpMIB/vtpMIBObjects/vlanEdit/vtpEditControlTable/vtpEditControlEntry/vtpVlanEditConfigRevNumber
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoVtpMIB/vtpMIBObjects/vlanEdit/vtpEditControlTable/vtpEditControlEntry/vtpVlanEditConfigRevNumber
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoVtpMIB/vtpMIBObjects/vlanEdit/vtpEditControlTable/vtpEditControlEntry/vtpVlanEditConfigRevNumber
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/46/1/4/1/1/4

    Description by circitor

    The Configuration Revision Number to be used for the next
    apply operation. This value is initialized (by the agent)
    on a copy operation to be one greater than the value of
    managementDomainConfigRevNumber. On an apply, if the
    number is less or equal to the value of
    managementDomainConfigRevNumber, then the apply fails.
    The value can be modified (increased) by network management
    before an apply to ensure that an apply does not fail for
    this reason.

    This object is used to allow management control over whether
    a configuration revision received via a VTP advertisement
    after a copy operation but before the succeeding apply
    operation is lost by being overwritten by the (local) edit
    operation. By default, the apply operation will fail in
    this situation. By increasing this object's value after the
    copy but before the apply, management can control whether
    the apply is to succeed (with the update via VTP
    advertisement being lost).

    Parsed from file CISCO-VTP-MIB.mib
    Module: CISCO-VTP-MIB

    Description by cisco_v1

    The Configuration Revision Number to be used for the next
    apply operation. This value is initialized (by the agent)
    on a copy operation to be one greater than the value of
    managementDomainConfigRevNumber. On an apply, if the
    number is less or equal to the value of
    managementDomainConfigRevNumber, then the apply fails.
    The value can be modified (increased) by network management
    before an apply to ensure that an apply does not fail for
    this reason.

    This object is used to allow management control over whether
    a configuration revision received via a VTP advertisement
    after a copy operation but before the succeeding apply
    operation is lost by being overwritten by the (local) edit
    operation. By default, the apply operation will fail in
    this situation. By increasing this object's value after the
    copy but before the apply, management can control whether
    the apply is to succeed (with the update via VTP
    advertisement being lost).

    Description by oid_info

    vtpVlanEditConfigRevNumber OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The Configuration Revision Number to be used for the next
    apply operation. This value is initialized (by the agent)
    on a copy operation to be one greater than the value of
    managementDomainConfigRevNumber. On an apply, if the
    number is less or equal to the value of
    managementDomainConfigRevNumber, then the apply fails.
    The value can be modified (increased) by network management
    before an apply to ensure that an apply does not fail for
    this reason.
    This object is used to allow management control over whether
    a configuration revision received via a VTP advertisement
    after a copy operation but before the succeeding apply
    operation is lost by being overwritten by the (local) edit
    operation. By default, the apply operation will fail in
    this situation. By increasing this objects value after the
    copy but before the apply, management can control whether
    the apply is to succeed (with the update via VTP
    advertisement being lost)."
    View at oid-info.com

    Description by mibdepot

    The Configuration Revision Number to be used for the next
    apply operation. This value is initialized (by the agent)
    on a copy operation to be one greater than the value of
    vtpConfigRevNumber. On an apply, if the number is less or
    equal to the value of vtpConfigRevNumber, then the apply
    fails. The value can be modified (increased) by network
    management before an apply to ensure than an apply does not
    fail for this reason.

    This object is used to allow management control over whether
    a configuration revision received via a VTP advertisement
    after a copy operation but before the succeeding apply
    operation is lost by being overwritten by the (local) edit
    operation. By default, the apply operation will fail in
    this situation. By increasing this object's value after the
    copy but before the apply, management can control whether
    the apply is to succeed (with the update via VTP
    advertisement being lost).

    Parsed from file cisco-vtp.mib.txt
    Company: None
    Module: CISCO-VTP-MIB

    Description by cisco

    The Configuration Revision Number to be used for the next
    apply operation. This value is initialized (by the agent)
    on a copy operation to be one greater than the value of
    managementDomainConfigRevNumber. On an apply, if the
    number is less or equal to the value of
    managementDomainConfigRevNumber, then the apply fails.
    The value can be modified (increased) by network management
    before an apply to ensure that an apply does not fail for
    this reason.

    This object is used to allow management control over whether
    a configuration revision received via a VTP advertisement
    after a copy operation but before the succeeding apply
    operation is lost by being overwritten by the (local) edit
    operation. By default, the apply operation will fail in
    this situation. By increasing this object's value after the
    copy but before the apply, management can control whether
    the apply is to succeed (with the update via VTP
    advertisement being lost).

    Information by circitor

    vtpVlanEditConfigRevNumber OBJECT-TYPE
    SYNTAX          Gauge32
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The Configuration Revision Number to be used for the next
        apply operation.  This value is initialized (by the agent)
        on a copy operation to be one greater than the value of
        managementDomainConfigRevNumber. On an apply, if the 
        number is less or equal to the value of 
        managementDomainConfigRevNumber, then the apply fails.
        The value can be modified (increased) by network management
        before an apply to ensure that an apply does not fail for 
        this reason.

        This object is used to allow management control over whether
        a configuration revision received via a VTP advertisement
        after a copy operation but before the succeeding apply
        operation is lost by being overwritten by the (local) edit
        operation.  By default, the apply operation will fail in
        this situation.  By increasing this object's value after the
        copy but before the apply, management can control whether
        the apply is to succeed (with the update via VTP
        advertisement being lost)." 
    ::= { vtpEditControlEntry 4 }

    Information by cisco_v1

    vtpVlanEditConfigRevNumber OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The Configuration Revision Number to be used for the next
        apply operation.  This value is initialized (by the agent)
        on a copy operation to be one greater than the value of
        managementDomainConfigRevNumber. On an apply, if the 
        number is less or equal to the value of 
        managementDomainConfigRevNumber, then the apply fails.
        The value can be modified (increased) by network management
        before an apply to ensure that an apply does not fail for 
        this reason.
        
        This object is used to allow management control over whether
        a configuration revision received via a VTP advertisement
        after a copy operation but before the succeeding apply
        operation is lost by being overwritten by the (local) edit
        operation.  By default, the apply operation will fail in
        this situation.  By increasing this object's value after the
        copy but before the apply, management can control whether
        the apply is to succeed (with the update via VTP
        advertisement being lost)."
    ::= { vtpEditControlEntry 4 }

    Information by oid_info

    Automatically extracted from a file named C-VTP

    Information by mibdepot

    vtpVlanEditConfigRevNumber OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
           "The Configuration Revision Number to be used for the next
            apply operation.  This value is initialized (by the agent)
            on a copy operation to be one greater than the value of
            vtpConfigRevNumber.  On an apply, if the number is less or
            equal to the value of vtpConfigRevNumber, then the apply
            fails.  The value can be modified (increased) by network
            management before an apply to ensure than an apply does not
            fail for this reason.

            This object is used to allow management control over whether
            a configuration revision received via a VTP advertisement
            after a copy operation but before the succeeding apply
            operation is lost by being overwritten by the (local) edit
            operation.  By default, the apply operation will fail in
            this situation.  By increasing this object's value after the
            copy but before the apply, management can control whether
            the apply is to succeed (with the update via VTP
            advertisement being lost)."
    ::= { vtpEditControlEntry  4 }

    Information by cisco

    vtpVlanEditConfigRevNumber OBJECT-TYPE
    SYNTAX          Gauge32
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The Configuration Revision Number to be used for the next
        apply operation.  This value is initialized (by the agent)
        on a copy operation to be one greater than the value of
        managementDomainConfigRevNumber. On an apply, if the 
        number is less or equal to the value of 
        managementDomainConfigRevNumber, then the apply fails.
        The value can be modified (increased) by network management
        before an apply to ensure that an apply does not fail for 
        this reason.

        This object is used to allow management control over whether
        a configuration revision received via a VTP advertisement
        after a copy operation but before the succeeding apply
        operation is lost by being overwritten by the (local) edit
        operation.  By default, the apply operation will fail in
        this situation.  By increasing this object's value after the
        copy but before the apply, management can control whether
        the apply is to succeed (with the update via VTP
        advertisement being lost)." 
    ::= { vtpEditControlEntry 4 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (4)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.46.1.4.1.1.1 vtpVlanEditOperation 0 0 This object always has the value 'none' when read. When
    written, each value causes the appropriate action:

    'copy' - causes the c…
    1.3.6.1.4.1.9.9.46.1.4.1.1.2 vtpVlanApplyStatus 0 0 The current status of an 'apply' operation to instanciate
    the Edit Buffer as the new global VLAN information (for this
    management…
    1.3.6.1.4.1.9.9.46.1.4.1.1.3 vtpVlanEditBufferOwner 0 0 The management station which is currently using the Edit
    Buffer for this management domain. When the Edit Buffer for
    a managemen…
    1.3.6.1.4.1.9.9.46.1.4.1.1.5 vtpVlanEditModifiedVlan 0 0 The VLAN-id of the modified VLAN in the Edit Buffer.
    If the object has the value of zero, any VLAN can
    be edited. If the value of…