Reference record for OID 1.3.6.1.4.1.9.9.47.1.3.2.1.4



parent
1.3.6.1.4.1.9.9.47.1.3.2.1 (cmLineConfigEntry)
node code
4
node name
cmShutdown
dot oid
1.3.6.1.4.1.9.9.47.1.3.2.1.4
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoModemMgmtMIB(47) ciscoModemMgmtMIBObjects(1) cmLineInfo(3) cmLineConfigTable(2) cmLineConfigEntry(1) cmShutdown(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoModemMgmtMIB(47) ciscoModemMgmtMIBObjects(1) cmLineInfo(3) cmLineConfigTable(2) cmLineConfigEntry(1) cmShutdown(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoModemMgmtMIB(47) ciscoModemMgmtMIBObjects(1) cmLineInfo(3) cmLineConfigTable(2) cmLineConfigEntry(1) cmShutdown(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoModemMgmtMIB(47) ciscoModemMgmtMIBObjects(1) cmLineInfo(3) cmLineConfigTable(2) cmLineConfigEntry(1) cmShutdown(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoModemMgmtMIB(47) ciscoModemMgmtMIBObjects(1) cmLineInfo(3) cmLineConfigTable(2) cmLineConfigEntry(1) cmShutdown(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoModemMgmtMIB(47) ciscoModemMgmtMIBObjects(1) cmLineInfo(3) cmLineConfigTable(2) cmLineConfigEntry(1) cmShutdown(4)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoModemMgmtMIB/ciscoModemMgmtMIBObjects/cmLineInfo/cmLineConfigTable/cmLineConfigEntry/cmShutdown
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoModemMgmtMIB/ciscoModemMgmtMIBObjects/cmLineInfo/cmLineConfigTable/cmLineConfigEntry/cmShutdown
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoModemMgmtMIB/ciscoModemMgmtMIBObjects/cmLineInfo/cmLineConfigTable/cmLineConfigEntry/cmShutdown
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoModemMgmtMIB/ciscoModemMgmtMIBObjects/cmLineInfo/cmLineConfigTable/cmLineConfigEntry/cmShutdown
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoModemMgmtMIB/ciscoModemMgmtMIBObjects/cmLineInfo/cmLineConfigTable/cmLineConfigEntry/cmShutdown
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoModemMgmtMIB/ciscoModemMgmtMIBObjects/cmLineInfo/cmLineConfigTable/cmLineConfigEntry/cmShutdown
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/47/1/3/2/1/4

    Description by circitor

    This object is used to put modem out of service, i.e. modem
    cannot make calls or answer calls. This is a hard busyout
    command to bring the modem out of service immediately without
    waiting for the call to be ended normally. After modem is
    shutdown, the following commands can be applied to those
    modems - reset, bad modem, download modem firmware, etc.

    The value of true(1) indicates the hard busyout has been
    issued to the modem. The value of false(2) indicates the
    modem has not been hard busyout.

    Parsed from file CISCO-MODEM-MGMT-MIB.mib
    Module: CISCO-MODEM-MGMT-MIB

    Description by cisco_v1

    This object is used to put modem out of service, i.e. modem
    cannot make calls or answer calls. This is a hard busyout
    command to bring the modem out of service immediately without
    waiting for the call to be ended normally. After modem is
    shutdown, the following commands can be applied to those
    modems - reset, bad modem, download modem firmware, etc.

    The value of true(1) indicates the hard busyout has been
    issued to the modem. The value of false(2) indicates the
    modem has not been hard busyout.

    Description by mibdepot

    This object is used to put modem out of service, i.e. modem
    cannot make calls or answer calls. This is a hard busyout
    command to bring the modem out of service immediately without
    waiting for the call to be ended normally. After modem is
    shutdown, the following commands can be applied to those
    modems - reset, bad modem, download modem firmware, etc.

    The value of true(1) indicates the hard busyout has been
    issued to the modem. The value of false(2) indicates the
    modem has not been hard busyout.

    Parsed from file CISCO-MODEM-MGMT-MIB.my.txt
    Company: None
    Module: CISCO-MODEM-MGMT-MIB

    Description by cisco

    This object is used to put modem out of service, i.e. modem
    cannot make calls or answer calls. This is a hard busyout
    command to bring the modem out of service immediately without
    waiting for the call to be ended normally. After modem is
    shutdown, the following commands can be applied to those
    modems - reset, bad modem, download modem firmware, etc.

    The value of true(1) indicates the hard busyout has been
    issued to the modem. The value of false(2) indicates the
    modem has not been hard busyout.

    Information by circitor

    cmShutdown OBJECT-TYPE
       SYNTAX     TruthValue
       MAX-ACCESS read-write
       STATUS     current
       DESCRIPTION
               "This object is used to put modem out of service, i.e. modem
                cannot make calls or answer calls. This is a hard busyout 
                command to bring the modem out of service immediately without 
                waiting for the call to be ended normally.  After modem is 
                shutdown, the following commands can be applied to those 
                modems - reset, bad modem, download modem firmware, etc.

                The value of true(1) indicates the hard busyout has been
                issued to the modem.  The value of false(2) indicates the 
                modem has not been hard busyout."
       DEFVAL { false }
       ::= { cmLineConfigEntry 4 }

    Information by cisco_v1

    cmShutdown OBJECT-TYPE
    SYNTAX TruthValue




    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used to put modem out of service, i.e. modem 
         cannot make calls or answer calls. This is a hard busyout  
         command to bring the modem out of service immediately without  
         waiting for the call to be ended normally.  After modem is  
         shutdown, the following commands can be applied to those  
         modems - reset, bad modem, download modem firmware, etc. 
        
         The value of true(1) indicates the hard busyout has been 
         issued to the modem.  The value of false(2) indicates the  
         modem has not been hard busyout."
    DEFVAL { false }
    ::= { cmLineConfigEntry 4 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-MODEM-MGMT-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    cmShutdown OBJECT-TYPE
       SYNTAX     TruthValue
       MAX-ACCESS read-write
       STATUS     current
       DESCRIPTION
               "This object is used to put modem out of service, i.e. modem
                cannot make calls or answer calls. This is a hard busyout 
                command to bring the modem out of service immediately without 
                waiting for the call to be ended normally.  After modem is 
                shutdown, the following commands can be applied to those 
                modems - reset, bad modem, download modem firmware, etc.

                The value of true(1) indicates the hard busyout has been
                issued to the modem.  The value of false(2) indicates the 
                modem has not been hard busyout."
       DEFVAL { false }
       ::= { cmLineConfigEntry 4 }

    Information by cisco

    cmShutdown OBJECT-TYPE
       SYNTAX     TruthValue
       MAX-ACCESS read-write
       STATUS     current
       DESCRIPTION
               "This object is used to put modem out of service, i.e. modem
                cannot make calls or answer calls. This is a hard busyout 
                command to bring the modem out of service immediately without 
                waiting for the call to be ended normally.  After modem is 
                shutdown, the following commands can be applied to those 
                modems - reset, bad modem, download modem firmware, etc.

                The value of true(1) indicates the hard busyout has been
                issued to the modem.  The value of false(2) indicates the 
                modem has not been hard busyout."
       DEFVAL { false }
       ::= { cmLineConfigEntry 4 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (5)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.47.1.3.2.1.1 cmATModePermit 0 0 Direct Connect session is used for test and debugging purpose
    by using the modem AT commands through the out of band
    management p…
    1.3.6.1.4.1.9.9.47.1.3.2.1.2 cmStatusPolling 0 0 Modem status and events can be polled through the out of band
    management port when the cmManageable is true.

    This object specifie…
    1.3.6.1.4.1.9.9.47.1.3.2.1.3 cmBusyOutRequest 0 0 This object is used to put modem out of service, i.e. modem
    cannot make calls or answer calls. If the modem to
    be busyout is hand…
    1.3.6.1.4.1.9.9.47.1.3.2.1.5 cmHoldReset 0 0 A command hold-reset will put the state of modem into reset mode
    until an inverse command to bring modem out of RESET mode.
    Durin…
    1.3.6.1.4.1.9.9.47.1.3.2.1.6 cmBad 0 0 This object can hold modem out of service and marks the modem
    as suspected or proven to be bad. During the router start-up
    initia…