Reference record for OID 1.3.6.1.4.1.9.9.474.1.1.1.1.2



parent
1.3.6.1.4.1.9.9.474.1.1.1.1 (cfgFilterGroupEntry)
node code
2
node name
cfgFilterGroupType
dot oid
1.3.6.1.4.1.9.9.474.1.1.1.1.2
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoFilterGroupMIB(474) ciscoFilterGroupMIBObjects(1) cfgFilterConfig(1) cfgFilterGroupTable(1) cfgFilterGroupEntry(1) cfgFilterGroupType(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoFilterGroupMIB(474) ciscoFilterGroupMIBObjects(1) cfgFilterConfig(1) cfgFilterGroupTable(1) cfgFilterGroupEntry(1) cfgFilterGroupType(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoFilterGroupMIB(474) ciscoFilterGroupMIBObjects(1) cfgFilterConfig(1) cfgFilterGroupTable(1) cfgFilterGroupEntry(1) cfgFilterGroupType(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoFilterGroupMIB(474) ciscoFilterGroupMIBObjects(1) cfgFilterConfig(1) cfgFilterGroupTable(1) cfgFilterGroupEntry(1) cfgFilterGroupType(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoFilterGroupMIB(474) ciscoFilterGroupMIBObjects(1) cfgFilterConfig(1) cfgFilterGroupTable(1) cfgFilterGroupEntry(1) cfgFilterGroupType(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoFilterGroupMIB(474) ciscoFilterGroupMIBObjects(1) cfgFilterConfig(1) cfgFilterGroupTable(1) cfgFilterGroupEntry(1) cfgFilterGroupType(2)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoFilterGroupMIB/ciscoFilterGroupMIBObjects/cfgFilterConfig/cfgFilterGroupTable/cfgFilterGroupEntry/cfgFilterGroupType
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoFilterGroupMIB/ciscoFilterGroupMIBObjects/cfgFilterConfig/cfgFilterGroupTable/cfgFilterGroupEntry/cfgFilterGroupType
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoFilterGroupMIB/ciscoFilterGroupMIBObjects/cfgFilterConfig/cfgFilterGroupTable/cfgFilterGroupEntry/cfgFilterGroupType
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoFilterGroupMIB/ciscoFilterGroupMIBObjects/cfgFilterConfig/cfgFilterGroupTable/cfgFilterGroupEntry/cfgFilterGroupType
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoFilterGroupMIB/ciscoFilterGroupMIBObjects/cfgFilterConfig/cfgFilterGroupTable/cfgFilterGroupEntry/cfgFilterGroupType
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoFilterGroupMIB/ciscoFilterGroupMIBObjects/cfgFilterConfig/cfgFilterGroupTable/cfgFilterGroupEntry/cfgFilterGroupType
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/474/1/1/1/1/2

    Description by circitor

    This object identifies the type of the filter group.
    The possible values are:
    network (1) : specifies network group.
    This group contains information on
    the IP address and address mask.
    This information is available in
    cfgFilterNetworkGroupTable.

    ipProtocol (2) : specifies IP protocol group.
    This group contains protocol value.
    This information is available in
    cfgFilterIpProtocolGroupTable.

    ipService (3) : specifies IP service group.
    This group contains information on
    UDP/TCP port. This information is
    available in cfgFilterIpServiceGroupTable.

    icmp (4) : specifies the ICMP group.
    This group contains information on ICMP
    Message Type and ICMP message code.
    This information is available in
    cfgFilterICMPGroupTable.

    The value of this object cannot be changed
    when cfgFilterGroupRowStatus is 'active'.

    Parsed from file CISCO-FILTER-GROUP-MIB.mib
    Module: CISCO-FILTER-GROUP-MIB

    Description by cisco_v1

    This object identifies the type of the filter group.
    The possible values are:
    network (1) : specifies network group.
    This group contains information on
    the IP address and address mask.
    This information is available in
    cfgFilterNetworkGroupTable.

    ipProtocol (2) : specifies IP protocol group.
    This group contains protocol value.
    This information is available in
    cfgFilterIpProtocolGroupTable.

    ipService (3) : specifies IP service group.
    This group contains information on
    UDP/TCP port. This information is
    available in cfgFilterIpServiceGroupTable.

    icmp (4) : specifies the ICMP group.
    This group contains information on ICMP
    Message Type and ICMP message code.
    This information is available in
    cfgFilterICMPGroupTable.

    The value of this object cannot be changed
    when cfgFilterGroupRowStatus is 'active'.

    Description by mibdepot

    This object identifies the type of the filter group.
    The possible values are:
    network (1) : specifies network group.
    This group contains information on
    the IP address and address mask.
    This information is available in
    cfgFilterNetworkGroupTable.

    ipProtocol (2) : specifies IP protocol group.
    This group contains protocol value.
    This information is available in
    cfgFilterIpProtocolGroupTable.

    ipService (3) : specifies IP service group.
    This group contains information on
    UDP/TCP port. This information is
    available in cfgFilterIpServiceGroupTable.

    icmp (4) : specifies the ICMP group.
    This group contains information on ICMP
    Message Type and ICMP message code.
    This information is available in
    cfgFilterICMPGroupTable.

    The value of this object cannot be changed
    when cfgFilterGroupRowStatus is 'active'.

    Parsed from file CISCO-FILTER-GROUP-MIB.my.txt
    Company: None
    Module: CISCO-FILTER-GROUP-MIB

    Description by cisco

    This object identifies the type of the filter group.
    The possible values are:
    network (1) : specifies network group.
    This group contains information on
    the IP address and address mask.
    This information is available in
    cfgFilterNetworkGroupTable.

    ipProtocol (2) : specifies IP protocol group.
    This group contains protocol value.
    This information is available in
    cfgFilterIpProtocolGroupTable.

    ipService (3) : specifies IP service group.
    This group contains information on
    UDP/TCP port. This information is
    available in cfgFilterIpServiceGroupTable.

    icmp (4) : specifies the ICMP group.
    This group contains information on ICMP
    Message Type and ICMP message code.
    This information is available in
    cfgFilterICMPGroupTable.

    The value of this object cannot be changed
    when cfgFilterGroupRowStatus is 'active'.

    Information by circitor

    cfgFilterGroupType OBJECT-TYPE
    SYNTAX     INTEGER {
        network    (1),
        ipProtocol (2),
        ipService  (3),
        icmp       (4)
    }
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION 
        "This object identifies the type of the filter group.
        The possible values are:
           network  (1) : specifies network group.
                          This group contains information on 
                          the IP address and address mask. 
                          This information is available in 
                          cfgFilterNetworkGroupTable.

           ipProtocol (2) : specifies IP protocol group.
                          This group contains protocol value.
                          This information is available in
                          cfgFilterIpProtocolGroupTable.

           ipService  (3) : specifies IP service group. 
                          This group contains information on 
                          UDP/TCP port.  This information is 
                          available in cfgFilterIpServiceGroupTable.

           icmp     (4) : specifies the ICMP group.
                          This group contains information on ICMP 
                          Message Type and ICMP message code.  
                          This information is available in
                          cfgFilterICMPGroupTable.

           The value of this object cannot be changed
           when cfgFilterGroupRowStatus is 'active'."
    ::= { cfgFilterGroupEntry 2 }

    Information by cisco_v1

    cfgFilterGroupType OBJECT-TYPE
    SYNTAX INTEGER {
        network(1),
        ipProtocol(2),
        ipService(3),
        icmp(4)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object identifies the type of the filter group.
        The possible values are:
           network  (1) : specifies network group.
                          This group contains information on 
                          the IP address and address mask. 
                          This information is available in 
                          cfgFilterNetworkGroupTable.
        
           ipProtocol (2) : specifies IP protocol group.
                          This group contains protocol value.
                          This information is available in
                          cfgFilterIpProtocolGroupTable.
        
           ipService  (3) : specifies IP service group. 
                          This group contains information on 
                          UDP/TCP port.  This information is 
                          available in cfgFilterIpServiceGroupTable.
        
           icmp     (4) : specifies the ICMP group.
                          This group contains information on ICMP 
                          Message Type and ICMP message code.  
                          This information is available in
                          cfgFilterICMPGroupTable.
        
           The value of this object cannot be changed
           when cfgFilterGroupRowStatus is 'active'."
    ::= { cfgFilterGroupEntry 2 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-FILTER-GROUP-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    cfgFilterGroupType OBJECT-TYPE
    SYNTAX     INTEGER {
        network    (1),
        ipProtocol (2),
        ipService  (3),
        icmp       (4)
    }
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION 
        "This object identifies the type of the filter group.
        The possible values are:
           network  (1) : specifies network group.
                          This group contains information on 
                          the IP address and address mask. 
                          This information is available in 
                          cfgFilterNetworkGroupTable.

           ipProtocol (2) : specifies IP protocol group.
                          This group contains protocol value.
                          This information is available in
                          cfgFilterIpProtocolGroupTable.

           ipService  (3) : specifies IP service group. 
                          This group contains information on 
                          UDP/TCP port.  This information is 
                          available in cfgFilterIpServiceGroupTable.

           icmp     (4) : specifies the ICMP group.
                          This group contains information on ICMP 
                          Message Type and ICMP message code.  
                          This information is available in
                          cfgFilterICMPGroupTable.

           The value of this object cannot be changed
           when cfgFilterGroupRowStatus is 'active'."
    ::= { cfgFilterGroupEntry 2 }

    Information by cisco

    cfgFilterGroupType OBJECT-TYPE
    SYNTAX     INTEGER {
        network    (1),
        ipProtocol (2),
        ipService  (3),
        icmp       (4)
    }
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION 
        "This object identifies the type of the filter group.
        The possible values are:
           network  (1) : specifies network group.
                          This group contains information on 
                          the IP address and address mask. 
                          This information is available in 
                          cfgFilterNetworkGroupTable.

           ipProtocol (2) : specifies IP protocol group.
                          This group contains protocol value.
                          This information is available in
                          cfgFilterIpProtocolGroupTable.

           ipService  (3) : specifies IP service group. 
                          This group contains information on 
                          UDP/TCP port.  This information is 
                          available in cfgFilterIpServiceGroupTable.

           icmp     (4) : specifies the ICMP group.
                          This group contains information on ICMP 
                          Message Type and ICMP message code.  
                          This information is available in
                          cfgFilterICMPGroupTable.

           The value of this object cannot be changed
           when cfgFilterGroupRowStatus is 'active'."
    ::= { cfgFilterGroupEntry 2 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (4)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.474.1.1.1.1.1 cfgFilterGroupName 0 0 This object identifies unique name for the
    filter group.
    1.3.6.1.4.1.9.9.474.1.1.1.1.3 cfgFilterGroupDescription 0 0 This object is used for configuring description
    for the filter group.
    1.3.6.1.4.1.9.9.474.1.1.1.1.4 cfgFilterGroupStorageType 0 0 The storage type for this conceptual row.
    1.3.6.1.4.1.9.9.474.1.1.1.1.5 cfgFilterGroupRowStatus 0 0 This object is used for adding/deleting
    entries in this table. This object can be
    set to 'active' only if cfgFilterGroupType
    is …