The compliance statement for WCMTS devices that
implement the Wideband DOCSIS feature.
ciscoCableWidebandMIBComplianceRev3 OBJECT IDENTIFIER ::= { ciscoCableWidebandMIBCompliances 4 }
ciscoCableWidebandMIBComplianceRev3 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for WCMTS devices that implement the Wideband DOCSIS feature." MODULE MANDATORY-GROUPS { ccwbWidebandObjGroupRev1, ccwbWidebandObjGroupSup1, ccwbWidebandObjGroupSup2, ccwbWidebandNotifGroup } OBJECT ccwbRFChannelFrequencyRev1 MIN-ACCESS read-only DESCRIPTION "Write access is not required. A range of 54MHz to 860MHz is appropriate for a cable plant using a North American Sub-Split channel plan. The spectrum range has been expanded to accommodate a lower edge of 47MHz and an upper edge of 862MHz for some European channel plans." OBJECT ccwbRFChannelWidth WRITE-SYNTAX Unsigned32(6000000 | 8000000) MIN-ACCESS read-only DESCRIPTION "Write access is not required. An implementation is only required to support 6000000 and 8000000. It is conformant to implement this object as read-only. The value of 6 MHz is appropriate for cable plants running under NTSC (National Television Standards Committee) standards. The value of 8 MHz is appropriate for cable plants running under ETSI standards." OBJECT ccwbRFChanQamIPAddressType SYNTAX INTEGER { ipv4(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required. An implementation is only required to support IPv4 addresses." OBJECT ccwbRFChannelRowStatus SYNTAX INTEGER { active(1) } WRITE-SYNTAX INTEGER { createAndGo(4), destroy(6) } MIN-ACCESS read-only DESCRIPTION "Write access is not required. Support for 'createAndWait' and 'notInService' is not required." OBJECT ccwbWBtoRFRowStatus SYNTAX INTEGER { active(1) } WRITE-SYNTAX INTEGER { createAndGo(4), destroy(6) } MIN-ACCESS read-only DESCRIPTION "Write access is not required. Support for 'createAndWait' and 'notInService' is not required." OBJECT ccwbRFChannelAnnex MIN-ACCESS read-only DESCRIPTION "Write access is not required. The value of this object will be same for all RF channels." OBJECT ccwbRFChannelModulation MIN-ACCESS read-only DESCRIPTION "Write access is not required. Currently the value of this object must be the same for all RF channels." OBJECT ccwbWBCmStatusValue SYNTAX INTEGER { wbOnline(27), wbOnlinePrivacy(28), wbOnlineKekAssigned(29), wbOnlineTekAssigned(30), wbOnlineNetAccessDis(31), wbKekReject(32), wbTekReject(33), wbNetAccessDisReject(34), wbPrivacyEnabReject(35), wbKekExpire(36), wbTekExpire(37), wbNetAccessDisExpire(38), wbPrivacyEnabExpire(39) } MIN-ACCESS read-only DESCRIPTION "Write access is not required. An implementation is only required to support the above numerated values." OBJECT ccwbFiberNodeDescription MIN-ACCESS read-only DESCRIPTION "Read and write operations are not needed for agents for which the associated value of the description string is null." OBJECT ccwbFiberNodeNBIfIndx MIN-ACCESS read-only DESCRIPTION "Write operation is not required for agents for which the associated value of if-index is not valid." OBJECT ccwbFiberNodeWBContlrPhyIndx MIN-ACCESS read-only DESCRIPTION "Write operation is not needed for agents that do not have valid physical entity value." OBJECT ccwbFiberNodeWBRFPort MIN-ACCESS read-only DESCRIPTION "Write operation is not needed for agents that do not have valid physical entity value." ::= { ciscoCableWidebandMIBCompliances 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.479.2.1.1 | ciscoCableWidebandMIBCompliance | 0 | 0 | The compliance statement for WCMTS devices that implement the Wideband DOCSIS feature. |
| 1.3.6.1.4.1.9.9.479.2.1.2 | ciscoCableWidebandMIBComplianceRev1 | 0 | 0 | The compliance statement for WCMTS devices that implement the Wideband DOCSIS feature. |
| 1.3.6.1.4.1.9.9.479.2.1.3 | ciscoCableWidebandMIBComplianceRev2 | 0 | 0 | The compliance statement for WCMTS devices that implement the Wideband DOCSIS feature. |