The number of clients that can be simultaneously
validated.
Set the rate limit to 0 (zero), rate limiting will be
turned off.
If the rate limit is set to 100 and there are 101 clients,
validation will not occur until one drop off.
Parsed from file CISCO-NAC-NAD-MIB.mib
Module: CISCO-NAC-NAD-MIB
The number of clients that can be simultaneously
validated.
Set the rate limit to 0 (zero), rate limiting will be
turned off.
If the rate limit is set to 100 and there are 101 clients,
validation will not occur until one drop off.
The number of clients that can be simultaneously
validated.
Set the rate limit to 0 (zero), rate limiting will be
turned off.
If the rate limit is set to 100 and there are 101 clients,
validation will not occur until one drop off.
Parsed from file cisco-nac-nad.mib.txt
Company: None
Module: CISCO-NAC-NAD-MIB
The number of clients that can be simultaneously
validated.
Set the rate limit to 0 (zero), rate limiting will be
turned off.
If the rate limit is set to 100 and there are 101 clients,
validation will not occur until one drop off.
cnnEouRateLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of clients that can be simultaneously validated. Set the rate limit to 0 (zero), rate limiting will be turned off. If the rate limit is set to 100 and there are 101 clients, validation will not occur until one drop off." ::= { cnnEouGlobalObjects 8 }
cnnEouRateLimit OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "The number of clients that can be simultaneously validated. Set the rate limit to 0 (zero), rate limiting will be turned off. If the rate limit is set to 100 and there are 101 clients, validation will not occur until one drop off." ::= { cnnEouGlobalObjects 8 }
Vendor: Cisco
Module: CISCO-NAC-NAD-MIB
[Automatically extracted from oidview.com]
cnnEouRateLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of clients that can be simultaneously validated. Set the rate limit to 0 (zero), rate limiting will be turned off. If the rate limit is set to 100 and there are 101 clients, validation will not occur until one drop off." ::= { cnnEouGlobalObjects 8 }
cnnEouRateLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of clients that can be simultaneously validated. Set the rate limit to 0 (zero), rate limiting will be turned off. If the rate limit is set to 100 and there are 101 clients, validation will not occur until one drop off." ::= { cnnEouGlobalObjects 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.484.1.1.8.0 | cnnEouRateLimit | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.484.1.1.1 | cnnEouVersion | 1 | 1 | The version of EOU in use on the local system. Value zero indicates the version can not be determined. |
| 1.3.6.1.4.1.9.9.484.1.1.2 | cnnEouEnabled | 1 | 1 | Indicates whether the posture validation via EOU is globally enabled or disabled in the device. |
| 1.3.6.1.4.1.9.9.484.1.1.3 | cnnEouAllowClientless | 1 | 1 | Indicates whether to allow authentication of clientless hosts (system that does not run Cisco Trust Agent). |
| 1.3.6.1.4.1.9.9.484.1.1.4 | cnnEouAllowIpStationId | 1 | 1 | It indicates whether to send the host IP address in the calling station ID field of Radius request. |
| 1.3.6.1.4.1.9.9.484.1.1.5 | cnnEouLoggingEnabled | 1 | 1 | To enable or disable EOU system logging events. Set to 'true' to enable syslog message at an informational level (syslog level 6). |
| 1.3.6.1.4.1.9.9.484.1.1.6 | cnnEouMaxRetry | 1 | 1 | The number of maximum retry attempts for EOU. |
| 1.3.6.1.4.1.9.9.484.1.1.7 | cnnEouPort | 1 | 1 | The UDP port for EOU. The port cannot conflict with other UDP application. |
| 1.3.6.1.4.1.9.9.484.1.1.9 | cnnEouTimeoutAAA | 1 | 1 | Timeout period used by NAD with AAA (Authentication, Authorization and Accounting. |
| 1.3.6.1.4.1.9.9.484.1.1.10 | cnnEouTimeoutHoldPeriod | 1 | 1 | Length of time that can elapse before the client sessions are purged from the system due to client inactivity. |
| 1.3.6.1.4.1.9.9.484.1.1.11 | cnnEouTimeoutRetransmit | 1 | 1 | The timeout period for the EOU message retransmitted. |
| 1.3.6.1.4.1.9.9.484.1.1.12 | cnnEouTimeoutRevalidation | 1 | 1 | The timeout period for the revalidation. Setting this object to 0 will globally disable periodic revalidation on this device. |
| 1.3.6.1.4.1.9.9.484.1.1.13 | cnnEouTimeoutStatusQuery | 1 | 1 | The timeout period for the status query after revalidation. |
| 1.3.6.1.4.1.9.9.484.1.1.14 | cnnEouCriticalRecoveryDelay | 1 | 1 | This object specifies the EOU critical recovery delay time for the device. A value of zero indicates that critical recovery dela… |
| 1.3.6.1.4.1.9.9.484.1.1.15 | cnnEouRevalidationEnabled | 0 | 0 | Indicates whether the EOU revalidation is globally enabled or disabled in the device. |