The timeout period for the status query after revalidation.
Parsed from file CISCO-NAC-NAD-MIB.mib
Module: CISCO-NAC-NAD-MIB
The timeout period for the status query after revalidation.
The timeout period for the status query after revalidation.
Parsed from file cisco-nac-nad.mib.txt
Company: None
Module: CISCO-NAC-NAD-MIB
The timeout period for the status query after revalidation.
cnnEouTimeoutStatusQuery OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The timeout period for the status query after revalidation." ::= { cnnEouGlobalObjects 13 }
cnnEouTimeoutStatusQuery OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "The timeout period for the status query after revalidation." ::= { cnnEouGlobalObjects 13 }
Vendor: Cisco
Module: CISCO-NAC-NAD-MIB
[Automatically extracted from oidview.com]
cnnEouTimeoutStatusQuery OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The timeout period for the status query after revalidation." ::= { cnnEouGlobalObjects 13 }
cnnEouTimeoutStatusQuery OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The timeout period for the status query after revalidation." ::= { cnnEouGlobalObjects 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.484.1.1.13.0 | cnnEouTimeoutStatusQuery | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.484.1.1.1 | cnnEouVersion | 1 | 1 | The version of EOU in use on the local system. Value zero indicates the version can not be determined. |
| 1.3.6.1.4.1.9.9.484.1.1.2 | cnnEouEnabled | 1 | 1 | Indicates whether the posture validation via EOU is globally enabled or disabled in the device. |
| 1.3.6.1.4.1.9.9.484.1.1.3 | cnnEouAllowClientless | 1 | 1 | Indicates whether to allow authentication of clientless hosts (system that does not run Cisco Trust Agent). |
| 1.3.6.1.4.1.9.9.484.1.1.4 | cnnEouAllowIpStationId | 1 | 1 | It indicates whether to send the host IP address in the calling station ID field of Radius request. |
| 1.3.6.1.4.1.9.9.484.1.1.5 | cnnEouLoggingEnabled | 1 | 1 | To enable or disable EOU system logging events. Set to 'true' to enable syslog message at an informational level (syslog level 6). |
| 1.3.6.1.4.1.9.9.484.1.1.6 | cnnEouMaxRetry | 1 | 1 | The number of maximum retry attempts for EOU. |
| 1.3.6.1.4.1.9.9.484.1.1.7 | cnnEouPort | 1 | 1 | The UDP port for EOU. The port cannot conflict with other UDP application. |
| 1.3.6.1.4.1.9.9.484.1.1.8 | cnnEouRateLimit | 1 | 1 | The number of clients that can be simultaneously validated. Set the rate limit to 0 (zero), rate limiting will be turned off. If th… |
| 1.3.6.1.4.1.9.9.484.1.1.9 | cnnEouTimeoutAAA | 1 | 1 | Timeout period used by NAD with AAA (Authentication, Authorization and Accounting. |
| 1.3.6.1.4.1.9.9.484.1.1.10 | cnnEouTimeoutHoldPeriod | 1 | 1 | Length of time that can elapse before the client sessions are purged from the system due to client inactivity. |
| 1.3.6.1.4.1.9.9.484.1.1.11 | cnnEouTimeoutRetransmit | 1 | 1 | The timeout period for the EOU message retransmitted. |
| 1.3.6.1.4.1.9.9.484.1.1.12 | cnnEouTimeoutRevalidation | 1 | 1 | The timeout period for the revalidation. Setting this object to 0 will globally disable periodic revalidation on this device. |
| 1.3.6.1.4.1.9.9.484.1.1.14 | cnnEouCriticalRecoveryDelay | 1 | 1 | This object specifies the EOU critical recovery delay time for the device. A value of zero indicates that critical recovery dela… |
| 1.3.6.1.4.1.9.9.484.1.1.15 | cnnEouRevalidationEnabled | 0 | 0 | Indicates whether the EOU revalidation is globally enabled or disabled in the device. |