An EOU validate action to the devices.
Initialize: When a device is initialized, all previous state
information about that host is deleted and the admission
control process for that host will start with no state.
Revalidate: When a host is revalidated, state information about
that host is retained so that the host still has its' normal
access during the revalidation process.
This object always has the value 'none' when read.
none(1) - no operation is performed.
initializeAll(2) - to manually initiates reauthentication of
all endpoint devices on the system.
initializeAuthClientless(3) - to manually initiates
reauthentication of all clientless endpoint devices.
initializeAuthEap(4) - to manually initiates reauthentication of
all the endpoint devices authorized by Extensive
Authentication Protocol.
initializeAuthStatic(5) - to manually initiates reauthentication
of all the statically authorized endpoint devices.
initializeIp(6) - to manually initiates reauthentication of a
specific IP device. The value in
cnnEouHostValidateIpAddrType and
cnnEouHostValidateIpAddr are used by this operation.
initializeMac(7) - to manually initiates reauthentication of the
endpoint device identified by MAC address. The value
in cnnEouHostValidateMacAddr is used by this
operation.
initializePostureToken(8) - to manually initiates
reauthentication of the endpoint device(s) with a
specify posture token assigned. The value in
cnnEouHostValidatePostureToken is used by this
operation.
This enumerated integer is deprecated and replaced by
initializePostureTokenStr(23).
revalidateAll(9) - to revalidate EOU posture credentials of all
devices on the system.
revalidateAuthClientless(10) - to revalidate EOU posture
credentials of all clientless devices on the system.
revalidateAuthEap(11) - to revalidate EOU posture credentials of
the devices authorized by EAP on the system.
revalidateAuthStatic(12) - to revalidate EOU posture credentials
of all statically authorized devices on the system.
revalidateIp(13) - to revalidates EOU posture credentials of a
specific IP device. The value in
cnnEouHostValidateIpAddrType and
cnnEouHostValidateIpAddr are used by this operation.
revalidateMac(14) - to revalidates EOU posture credentials of a
specific device identified by MAC address. The value
in cnnEouHostValidateMacAddr is used by this
operation.
revalidatePostureToken(15) - to enable revalidates EOU posture
credentials of the devices with the specific posture
token assigned. The value in
cnnEouHostValidatePostureToken is used by this
operation.
This enumerated integer is deprecated and replaced by
revalidatePostureTokenStr(24).
noRevalidateAll(16) - to disable revalidation of all devices on
the system.
noRevalidateAuthClientless(17) - to disable the revalidation of
all clientless devices on the system.
noRevalidateAuthEap(18) - to disable the revalidation of all
devices authorized by EAP on the system.
noRevalidateAuthStatic(19) - to disable the revalidation of all
statically authorized devices on the system.
noRevalidateIp(20) - to disable the revalidation of the specific
IP device. The value in cnnEouHostValidateIpAddrType
and cnnEouHostValidateIpAddr are used by this operation.
noRevalidateMac(21) - to disable the revalidation of the specific
device identified by MAC address. The value in
cnnEouHostValidateMacAddr is used by this operation.
noRevalidatePostureToken(22) - to disable the revalidation of all
device with the specific posture token assigned.
The value in cnnEouHostValidatePostureToken is used by
this operation.
This enumerated integer is deprecated and replaced by
noRevalidatePostureTokenStr(25).
initializePostureTokenStr(23) - to manually initiates
reauthentication of the endpoint device(s) with a
specify posture token assigned. The value in
cnnEouHostValidatePostureTokenStr is used by this
operation.
revalidatePostureTokenStr(24) - to enable revalidates EOU
posture credentials of the devices with the specific
posture token assigned. The value in
cnnEouHostValidatePostureTokenStr is used by this
operation.
noRevalidatePostureTokenStr(25) - to disable the revalidation
of all device with the specific posture token
assigned. The value in
cnnEouHostValidatePostureTokenStr is used by this
operation.
Parsed from file CISCO-NAC-NAD-MIB.mib
Module: CISCO-NAC-NAD-MIB
An EOU validate action to the devices.
Initialize: When a device is initialized, all previous state
information about that host is deleted and the admission
control process for that host will start with no state.
Revalidate: When a host is revalidated, state information about
that host is retained so that the host still has its' normal
access during the revalidation process.
This object always has the value 'none' when read.
none(1) - no operation is performed.
initializeAll(2) - to manually initiates reauthentication of
all endpoint devices on the system.
initializeAuthClientless(3) - to manually initiates
reauthentication of all clientless endpoint devices.
initializeAuthEap(4) - to manually initiates reauthentication of
all the endpoint devices authorized by Extensive
Authentication Protocol.
initializeAuthStatic(5) - to manually initiates reauthentication
of all the statically authorized endpoint devices.
initializeIp(6) - to manually initiates reauthentication of a
specific IP device. The value in
cnnEouHostValidateIpAddrType and
cnnEouHostValidateIpAddr are used by this operation.
initializeMac(7) - to manually initiates reauthentication of the
endpoint device identified by MAC address. The value
in cnnEouHostValidateMacAddr is used by this
operation.
initializePostureToken(8) - to manually initiates
reauthentication of the endpoint device(s) with a
specify posture token assigned. The value in
cnnEouHostValidatePostureToken is used by this
operation.
This enumerated integer is deprecated and replaced by
initializePostureTokenStr.
revalidateAll(9) - to revalidate EOU posture credentials of all
devices on the system.
revalidateAuthClientless(10) - to revalidate EOU posture
credentials of all clientless devices on the system.
revalidateAuthEap(11) - to revalidate EOU posture credentials of
the devices authorized by EAP on the system.
revalidateAuthStatic(12) - to revalidate EOU posture credentials
of all statically authorized devices on the system.
revalidateIp(13) - to revalidates EOU posture credentials of a
specific IP device. The value in
cnnEouHostValidateIpAddrType and
cnnEouHostValidateIpAddr are used by this operation.
revalidateMac(14) - to revalidates EOU posture credentials of a
specific device identified by MAC address. The value
in cnnEouHostValidateMacAddr is used by this
operation.
revalidatePostureToken(15) - to enable revalidates EOU posture
credentials of the devices with the specific posture
token assigned. The value in
cnnEouHostValidatePostureToken is used by this
operation.
This enumerated integer is deprecated and replaced by
revalidatePostureTokenStr.
noRevalidateAll(16) - to disable revalidation of all devices on
the system.
noRevalidateAuthClientless(17) - to disable the revalidation of
all clientless devices on the system.
noRevalidateAuthEap(18) - to disable the revalidation of all
devices authorized by EAP on the system.
noRevalidateAuthStatic(19) - to disable the revalidation of all
statically authorized devices on the system.
noRevalidateIp(20) - to disable the revalidation of the specific
IP device. The value in cnnEouHostValidateIpAddrType
and cnnEouHostValidateIpAddr are used by this operation.
noRevalidateMac(21) - to disable the revalidation of the specific
device identified by MAC address. The value in
cnnEouHostValidateMacAddr is used by this operation.
noRevalidatePostureToken(22) - to disable the revalidation of all
device with the specific posture token assigned.
The value in cnnEouHostValidatePostureToken is used by
this operation.
This enumerated integer is deprecated and replaced by
noRevalidatePostureTokenStr.
initializePostureTokenStr(23) - to manually initiates
reauthentication of the endpoint device(s) with a
specify posture token assigned. The value in
cnnEouHostValidatePostureTokenStr is used by this
operation.
revalidatePostureTokenStr(24) - to enable revalidates EOU
posture credentials of the devices with the specific
posture token assigned. The value in
cnnEouHostValidatePostureTokenStr is used by this
operation.
noRevalidatePostureTokenStr(25) - to disable the revalidation
of all device with the specific posture token
assigned. The value in
cnnEouHostValidatePostureTokenStr is used by this
operation.
An EOU validate action to the devices.
Initialize: When a device is initialized, all previous state
information about that host is deleted and the admission
control process for that host will start with no state.
Revalidate: When a host is revalidated, state information about
that host is retained so that the host still has its' normal
access during the revalidation process.
This object always has the value 'none' when read.
none(1)
no operation is performed.
initializeAll(2)
to manually initiates reauthentication of all endpoint
devices on the system.
initializeAuthClientless(3)
to manually initiates reauthentication of all
clientless endpoint devices.
initializeAuthEap(4)
to manually initiates reauthentication of all the
endpoint devices authorized by Extensive Authentication
Protocol.
initializeAuthStatic(5)
to manually initiates reauthentication of all the
statically authorized endpoint devices.
initializeIp(6)
to manually initiates reauthentication of a specific
IP device. The value in cnnEouHostValidateIpAddrType and
cnnEouHostValidateIpAddr are used by this operation.
initializeMac(7)
to manually initiates reauthentication of the endpoint
device identified by MAC address. The value in
cnnEouHostValidateMacAddr is used by this operation.
initializePostureToken(8)
to manually initiates reauthentication of the endpoint
device(s) with a specify posture token assigned.
The value in cnnEouHostValidatePostureToken is used
by this operation.
revalidateAll(9)
to revalidate EOU posture credentials of all devices
on the system.
revalidateAuthClientless(10)
to revalidate EOU posture credentials of all clientless
devices on the system.
revalidateAuthEap(11)
to revalidate EOU posture credentials of the devices
authorized by EAP on the system.
revalidateAuthStatic(12)
to revalidate EOU posture credentials of all statically
authorized devices on the system.
revalidateIp(13)
to revalidates EOU posture credentials of a specific
IP device. The value in cnnEouHostValidateIpAddrType and
cnnEouHostValidateIpAddr are used by this operation.
revalidateMac(14)
to revalidates EOU posture credentials of a specific
device identified by MAC address. The value in
cnnEouHostValidateMacAddr is used by this operation.
revalidatePostureToken(15)
to enable revalidates EOU posture credentials of the
devices with the specific posture token assigned.
The value in cnnEouHostValidatePostureToken is used
by this operation.
noRevalidateAll(16)
to disable revalidation of all devices on the system.
noRevalidateAuthClientless(17)
to disable the revalidation of all clientless devices
on the system.
noRevalidateAuthEap(18)
to disable the revalidation of all devices authorized
by EAP on the system.
noRevalidateAuthStatic(19)
to disable the revalidation of all statically authorized
devices on the system.
noRevalidateIp(20)
to disable the revalidation of the specific IP device.
The value in cnnEouHostValidateIpAddrType and
cnnEouHostValidateIpAddr are used by this operation.
noRevalidateMac(21)
to disable the revalidation of the specific device
identified by MAC address. The value in
cnnEouHostValidateMacAddr is used by this operation.
noRevalidatePostureToken(22)
to disable the revalidation of all device with the
specific posture token assigned. The value in
cnnEouHostValidatePostureToken is used by this operation.
Parsed from file cisco-nac-nad.mib.txt
Company: None
Module: CISCO-NAC-NAD-MIB
An EOU validate action to the devices.
Initialize: When a device is initialized, all previous state
information about that host is deleted and the admission
control process for that host will start with no state.
Revalidate: When a host is revalidated, state information about
that host is retained so that the host still has its' normal
access during the revalidation process.
This object always has the value 'none' when read.
none(1) - no operation is performed.
initializeAll(2) - to manually initiates reauthentication of
all endpoint devices on the system.
initializeAuthClientless(3) - to manually initiates
reauthentication of all clientless endpoint devices.
initializeAuthEap(4) - to manually initiates reauthentication of
all the endpoint devices authorized by Extensive
Authentication Protocol.
initializeAuthStatic(5) - to manually initiates reauthentication
of all the statically authorized endpoint devices.
initializeIp(6) - to manually initiates reauthentication of a
specific IP device. The value in
cnnEouHostValidateIpAddrType and
cnnEouHostValidateIpAddr are used by this operation.
initializeMac(7) - to manually initiates reauthentication of the
endpoint device identified by MAC address. The value
in cnnEouHostValidateMacAddr is used by this
operation.
initializePostureToken(8) - to manually initiates
reauthentication of the endpoint device(s) with a
specify posture token assigned. The value in
cnnEouHostValidatePostureToken is used by this
operation.
This enumerated integer is deprecated and replaced by
initializePostureTokenStr.
revalidateAll(9) - to revalidate EOU posture credentials of all
devices on the system.
revalidateAuthClientless(10) - to revalidate EOU posture
credentials of all clientless devices on the system.
revalidateAuthEap(11) - to revalidate EOU posture credentials of
the devices authorized by EAP on the system.
revalidateAuthStatic(12) - to revalidate EOU posture credentials
of all statically authorized devices on the system.
revalidateIp(13) - to revalidates EOU posture credentials of a
specific IP device. The value in
cnnEouHostValidateIpAddrType and
cnnEouHostValidateIpAddr are used by this operation.
revalidateMac(14) - to revalidates EOU posture credentials of a
specific device identified by MAC address. The value
in cnnEouHostValidateMacAddr is used by this
operation.
revalidatePostureToken(15) - to enable revalidates EOU posture
credentials of the devices with the specific posture
token assigned. The value in
cnnEouHostValidatePostureToken is used by this
operation.
This enumerated integer is deprecated and replaced by
revalidatePostureTokenStr.
noRevalidateAll(16) - to disable revalidation of all devices on
the system.
noRevalidateAuthClientless(17) - to disable the revalidation of
all clientless devices on the system.
noRevalidateAuthEap(18) - to disable the revalidation of all
devices authorized by EAP on the system.
noRevalidateAuthStatic(19) - to disable the revalidation of all
statically authorized devices on the system.
noRevalidateIp(20) - to disable the revalidation of the specific
IP device. The value in cnnEouHostValidateIpAddrType
and cnnEouHostValidateIpAddr are used by this operation.
noRevalidateMac(21) - to disable the revalidation of the specific
device identified by MAC address. The value in
cnnEouHostValidateMacAddr is used by this operation.
noRevalidatePostureToken(22) - to disable the revalidation of all
device with the specific posture token assigned.
The value in cnnEouHostValidatePostureToken is used by
this operation.
This enumerated integer is deprecated and replaced by
noRevalidatePostureTokenStr.
initializePostureTokenStr(23) - to manually initiates
reauthentication of the endpoint device(s) with a
specify posture token assigned. The value in
cnnEouHostValidatePostureTokenStr is used by this
operation.
revalidatePostureTokenStr(24) - to enable revalidates EOU
posture credentials of the devices with the specific
posture token assigned. The value in
cnnEouHostValidatePostureTokenStr is used by this
operation.
noRevalidatePostureTokenStr(25) - to disable the revalidation
of all device with the specific posture token
assigned. The value in
cnnEouHostValidatePostureTokenStr is used by this
operation.
cnnEouHostValidateAction OBJECT-TYPE SYNTAX INTEGER { none(1), initializeAll(2), initializeAuthClientless(3), initializeAuthEap(4), initializeAuthStatic(5), initializeIp(6), initializeMac(7), initializePostureToken(8), revalidateAll(9), revalidateAuthClientless(10), revalidateAuthEap(11), revalidateAuthStatic(12), revalidateIp(13), revalidateMac(14), revalidatePostureToken(15), noRevalidateAll(16), noRevalidateAuthClientless(17), noRevalidateAuthEap(18), noRevalidateAuthStatic(19), noRevalidateIp(20), noRevalidateMac(21), noRevalidatePostureToken(22), initializePostureTokenStr(23), revalidatePostureTokenStr(24), noRevalidatePostureTokenStr(25) } MAX-ACCESS read-write STATUS current DESCRIPTION "An EOU validate action to the devices. Initialize: When a device is initialized, all previous state information about that host is deleted and the admission control process for that host will start with no state. Revalidate: When a host is revalidated, state information about that host is retained so that the host still has its' normal access during the revalidation process. This object always has the value 'none' when read. none(1) - no operation is performed. initializeAll(2) - to manually initiates reauthentication of all endpoint devices on the system. initializeAuthClientless(3) - to manually initiates reauthentication of all clientless endpoint devices. initializeAuthEap(4) - to manually initiates reauthentication of all the endpoint devices authorized by Extensive Authentication Protocol. initializeAuthStatic(5) - to manually initiates reauthentication of all the statically authorized endpoint devices. initializeIp(6) - to manually initiates reauthentication of a specific IP device. The value in cnnEouHostValidateIpAddrType and cnnEouHostValidateIpAddr are used by this operation. initializeMac(7) - to manually initiates reauthentication of the endpoint device identified by MAC address. The value in cnnEouHostValidateMacAddr is used by this operation. initializePostureToken(8) - to manually initiates reauthentication of the endpoint device(s) with a specify posture token assigned. The value in cnnEouHostValidatePostureToken is used by this operation. This enumerated integer is deprecated and replaced by initializePostureTokenStr(23). revalidateAll(9) - to revalidate EOU posture credentials of all devices on the system. revalidateAuthClientless(10) - to revalidate EOU posture credentials of all clientless devices on the system. revalidateAuthEap(11) - to revalidate EOU posture credentials of the devices authorized by EAP on the system. revalidateAuthStatic(12) - to revalidate EOU posture credentials of all statically authorized devices on the system. revalidateIp(13) - to revalidates EOU posture credentials of a specific IP device. The value in cnnEouHostValidateIpAddrType and cnnEouHostValidateIpAddr are used by this operation. revalidateMac(14) - to revalidates EOU posture credentials of a specific device identified by MAC address. The value in cnnEouHostValidateMacAddr is used by this operation. revalidatePostureToken(15) - to enable revalidates EOU posture credentials of the devices with the specific posture token assigned. The value in cnnEouHostValidatePostureToken is used by this operation. This enumerated integer is deprecated and replaced by revalidatePostureTokenStr(24). noRevalidateAll(16) - to disable revalidation of all devices on the system. noRevalidateAuthClientless(17) - to disable the revalidation of all clientless devices on the system. noRevalidateAuthEap(18) - to disable the revalidation of all devices authorized by EAP on the system. noRevalidateAuthStatic(19) - to disable the revalidation of all statically authorized devices on the system. noRevalidateIp(20) - to disable the revalidation of the specific IP device. The value in cnnEouHostValidateIpAddrType and cnnEouHostValidateIpAddr are used by this operation. noRevalidateMac(21) - to disable the revalidation of the specific device identified by MAC address. The value in cnnEouHostValidateMacAddr is used by this operation. noRevalidatePostureToken(22) - to disable the revalidation of all device with the specific posture token assigned. The value in cnnEouHostValidatePostureToken is used by this operation. This enumerated integer is deprecated and replaced by noRevalidatePostureTokenStr(25). initializePostureTokenStr(23) - to manually initiates reauthentication of the endpoint device(s) with a specify posture token assigned. The value in cnnEouHostValidatePostureTokenStr is used by this operation. revalidatePostureTokenStr(24) - to enable revalidates EOU posture credentials of the devices with the specific posture token assigned. The value in cnnEouHostValidatePostureTokenStr is used by this operation. noRevalidatePostureTokenStr(25) - to disable the revalidation of all device with the specific posture token assigned. The value in cnnEouHostValidatePostureTokenStr is used by this operation." ::= { cnnEouHostMIBObjects 1 }
cnnEouHostValidateAction OBJECT-TYPE SYNTAX INTEGER { none(1), initializeAll(2), initializeAuthClientless(3), initializeAuthEap(4), initializeAuthStatic(5), initializeIp(6), initializeMac(7), initializePostureToken(8), revalidateAll(9), revalidateAuthClientless(10), revalidateAuthEap(11), revalidateAuthStatic(12), revalidateIp(13), revalidateMac(14), revalidatePostureToken(15), noRevalidateAll(16), noRevalidateAuthClientless(17), noRevalidateAuthEap(18), noRevalidateAuthStatic(19), noRevalidateIp(20), noRevalidateMac(21), noRevalidatePostureToken(22), initializePostureTokenStr(23), revalidatePostureTokenStr(24), noRevalidatePostureTokenStr(25) } ACCESS read-write STATUS mandatory DESCRIPTION "An EOU validate action to the devices. Initialize: When a device is initialized, all previous state information about that host is deleted and the admission control process for that host will start with no state. Revalidate: When a host is revalidated, state information about that host is retained so that the host still has its' normal access during the revalidation process. This object always has the value 'none' when read. none(1) - no operation is performed. initializeAll(2) - to manually initiates reauthentication of all endpoint devices on the system. initializeAuthClientless(3) - to manually initiates reauthentication of all clientless endpoint devices. initializeAuthEap(4) - to manually initiates reauthentication of all the endpoint devices authorized by Extensive Authentication Protocol. initializeAuthStatic(5) - to manually initiates reauthentication of all the statically authorized endpoint devices. initializeIp(6) - to manually initiates reauthentication of a specific IP device. The value in cnnEouHostValidateIpAddrType and cnnEouHostValidateIpAddr are used by this operation. initializeMac(7) - to manually initiates reauthentication of the endpoint device identified by MAC address. The value in cnnEouHostValidateMacAddr is used by this operation. initializePostureToken(8) - to manually initiates reauthentication of the endpoint device(s) with a specify posture token assigned. The value in cnnEouHostValidatePostureToken is used by this operation. This enumerated integer is deprecated and replaced by initializePostureTokenStr. revalidateAll(9) - to revalidate EOU posture credentials of all devices on the system. revalidateAuthClientless(10) - to revalidate EOU posture credentials of all clientless devices on the system. revalidateAuthEap(11) - to revalidate EOU posture credentials of the devices authorized by EAP on the system. revalidateAuthStatic(12) - to revalidate EOU posture credentials of all statically authorized devices on the system. revalidateIp(13) - to revalidates EOU posture credentials of a specific IP device. The value in cnnEouHostValidateIpAddrType and cnnEouHostValidateIpAddr are used by this operation. revalidateMac(14) - to revalidates EOU posture credentials of a specific device identified by MAC address. The value in cnnEouHostValidateMacAddr is used by this operation. revalidatePostureToken(15) - to enable revalidates EOU posture credentials of the devices with the specific posture token assigned. The value in cnnEouHostValidatePostureToken is used by this operation. This enumerated integer is deprecated and replaced by revalidatePostureTokenStr. noRevalidateAll(16) - to disable revalidation of all devices on the system. noRevalidateAuthClientless(17) - to disable the revalidation of all clientless devices on the system. noRevalidateAuthEap(18) - to disable the revalidation of all devices authorized by EAP on the system. noRevalidateAuthStatic(19) - to disable the revalidation of all statically authorized devices on the system. noRevalidateIp(20) - to disable the revalidation of the specific IP device. The value in cnnEouHostValidateIpAddrType and cnnEouHostValidateIpAddr are used by this operation. noRevalidateMac(21) - to disable the revalidation of the specific device identified by MAC address. The value in cnnEouHostValidateMacAddr is used by this operation. noRevalidatePostureToken(22) - to disable the revalidation of all device with the specific posture token assigned. The value in cnnEouHostValidatePostureToken is used by this operation. This enumerated integer is deprecated and replaced by noRevalidatePostureTokenStr. initializePostureTokenStr(23) - to manually initiates reauthentication of the endpoint device(s) with a specify posture token assigned. The value in cnnEouHostValidatePostureTokenStr is used by this operation. revalidatePostureTokenStr(24) - to enable revalidates EOU posture credentials of the devices with the specific posture token assigned. The value in cnnEouHostValidatePostureTokenStr is used by this operation. noRevalidatePostureTokenStr(25) - to disable the revalidation of all device with the specific posture token assigned. The value in cnnEouHostValidatePostureTokenStr is used by this operation." ::= { cnnEouHostMIBObjects 1 }
Vendor: Cisco
Module: CISCO-NAC-NAD-MIB
[Automatically extracted from oidview.com]
cnnEouHostValidateAction OBJECT-TYPE SYNTAX INTEGER { none(1), initializeAll(2), initializeAuthClientless(3), initializeAuthEap(4), initializeAuthStatic(5), initializeIp(6), initializeMac(7), initializePostureToken(8), revalidateAll(9), revalidateAuthClientless(10), revalidateAuthEap(11), revalidateAuthStatic(12), revalidateIp(13), revalidateMac(14), revalidatePostureToken(15), noRevalidateAll(16), noRevalidateAuthClientless(17), noRevalidateAuthEap(18), noRevalidateAuthStatic(19), noRevalidateIp(20), noRevalidateMac(21), noRevalidatePostureToken(22) } MAX-ACCESS read-write STATUS current DESCRIPTION "An EOU validate action to the devices. Initialize: When a device is initialized, all previous state information about that host is deleted and the admission control process for that host will start with no state. Revalidate: When a host is revalidated, state information about that host is retained so that the host still has its' normal access during the revalidation process. This object always has the value 'none' when read. none(1) no operation is performed. initializeAll(2) to manually initiates reauthentication of all endpoint devices on the system. initializeAuthClientless(3) to manually initiates reauthentication of all clientless endpoint devices. initializeAuthEap(4) to manually initiates reauthentication of all the endpoint devices authorized by Extensive Authentication Protocol. initializeAuthStatic(5) to manually initiates reauthentication of all the statically authorized endpoint devices. initializeIp(6) to manually initiates reauthentication of a specific IP device. The value in cnnEouHostValidateIpAddrType and cnnEouHostValidateIpAddr are used by this operation. initializeMac(7) to manually initiates reauthentication of the endpoint device identified by MAC address. The value in cnnEouHostValidateMacAddr is used by this operation. initializePostureToken(8) to manually initiates reauthentication of the endpoint device(s) with a specify posture token assigned. The value in cnnEouHostValidatePostureToken is used by this operation. revalidateAll(9) to revalidate EOU posture credentials of all devices on the system. revalidateAuthClientless(10) to revalidate EOU posture credentials of all clientless devices on the system. revalidateAuthEap(11) to revalidate EOU posture credentials of the devices authorized by EAP on the system. revalidateAuthStatic(12) to revalidate EOU posture credentials of all statically authorized devices on the system. revalidateIp(13) to revalidates EOU posture credentials of a specific IP device. The value in cnnEouHostValidateIpAddrType and cnnEouHostValidateIpAddr are used by this operation. revalidateMac(14) to revalidates EOU posture credentials of a specific device identified by MAC address. The value in cnnEouHostValidateMacAddr is used by this operation. revalidatePostureToken(15) to enable revalidates EOU posture credentials of the devices with the specific posture token assigned. The value in cnnEouHostValidatePostureToken is used by this operation. noRevalidateAll(16) to disable revalidation of all devices on the system. noRevalidateAuthClientless(17) to disable the revalidation of all clientless devices on the system. noRevalidateAuthEap(18) to disable the revalidation of all devices authorized by EAP on the system. noRevalidateAuthStatic(19) to disable the revalidation of all statically authorized devices on the system. noRevalidateIp(20) to disable the revalidation of the specific IP device. The value in cnnEouHostValidateIpAddrType and cnnEouHostValidateIpAddr are used by this operation. noRevalidateMac(21) to disable the revalidation of the specific device identified by MAC address. The value in cnnEouHostValidateMacAddr is used by this operation. noRevalidatePostureToken(22) to disable the revalidation of all device with the specific posture token assigned. The value in cnnEouHostValidatePostureToken is used by this operation." ::= { cnnEouHostMIBObjects 1 }
cnnEouHostValidateAction OBJECT-TYPE SYNTAX INTEGER { none(1), initializeAll(2), initializeAuthClientless(3), initializeAuthEap(4), initializeAuthStatic(5), initializeIp(6), initializeMac(7), initializePostureToken(8), revalidateAll(9), revalidateAuthClientless(10), revalidateAuthEap(11), revalidateAuthStatic(12), revalidateIp(13), revalidateMac(14), revalidatePostureToken(15), noRevalidateAll(16), noRevalidateAuthClientless(17), noRevalidateAuthEap(18), noRevalidateAuthStatic(19), noRevalidateIp(20), noRevalidateMac(21), noRevalidatePostureToken(22), initializePostureTokenStr(23), revalidatePostureTokenStr(24), noRevalidatePostureTokenStr(25) } MAX-ACCESS read-write STATUS current DESCRIPTION "An EOU validate action to the devices. Initialize: When a device is initialized, all previous state information about that host is deleted and the admission control process for that host will start with no state. Revalidate: When a host is revalidated, state information about that host is retained so that the host still has its' normal access during the revalidation process. This object always has the value 'none' when read. none(1) - no operation is performed. initializeAll(2) - to manually initiates reauthentication of all endpoint devices on the system. initializeAuthClientless(3) - to manually initiates reauthentication of all clientless endpoint devices. initializeAuthEap(4) - to manually initiates reauthentication of all the endpoint devices authorized by Extensive Authentication Protocol. initializeAuthStatic(5) - to manually initiates reauthentication of all the statically authorized endpoint devices. initializeIp(6) - to manually initiates reauthentication of a specific IP device. The value in cnnEouHostValidateIpAddrType and cnnEouHostValidateIpAddr are used by this operation. initializeMac(7) - to manually initiates reauthentication of the endpoint device identified by MAC address. The value in cnnEouHostValidateMacAddr is used by this operation. initializePostureToken(8) - to manually initiates reauthentication of the endpoint device(s) with a specify posture token assigned. The value in cnnEouHostValidatePostureToken is used by this operation. This enumerated integer is deprecated and replaced by initializePostureTokenStr. revalidateAll(9) - to revalidate EOU posture credentials of all devices on the system. revalidateAuthClientless(10) - to revalidate EOU posture credentials of all clientless devices on the system. revalidateAuthEap(11) - to revalidate EOU posture credentials of the devices authorized by EAP on the system. revalidateAuthStatic(12) - to revalidate EOU posture credentials of all statically authorized devices on the system. revalidateIp(13) - to revalidates EOU posture credentials of a specific IP device. The value in cnnEouHostValidateIpAddrType and cnnEouHostValidateIpAddr are used by this operation. revalidateMac(14) - to revalidates EOU posture credentials of a specific device identified by MAC address. The value in cnnEouHostValidateMacAddr is used by this operation. revalidatePostureToken(15) - to enable revalidates EOU posture credentials of the devices with the specific posture token assigned. The value in cnnEouHostValidatePostureToken is used by this operation. This enumerated integer is deprecated and replaced by revalidatePostureTokenStr. noRevalidateAll(16) - to disable revalidation of all devices on the system. noRevalidateAuthClientless(17) - to disable the revalidation of all clientless devices on the system. noRevalidateAuthEap(18) - to disable the revalidation of all devices authorized by EAP on the system. noRevalidateAuthStatic(19) - to disable the revalidation of all statically authorized devices on the system. noRevalidateIp(20) - to disable the revalidation of the specific IP device. The value in cnnEouHostValidateIpAddrType and cnnEouHostValidateIpAddr are used by this operation. noRevalidateMac(21) - to disable the revalidation of the specific device identified by MAC address. The value in cnnEouHostValidateMacAddr is used by this operation. noRevalidatePostureToken(22) - to disable the revalidation of all device with the specific posture token assigned. The value in cnnEouHostValidatePostureToken is used by this operation. This enumerated integer is deprecated and replaced by noRevalidatePostureTokenStr. initializePostureTokenStr(23) - to manually initiates reauthentication of the endpoint device(s) with a specify posture token assigned. The value in cnnEouHostValidatePostureTokenStr is used by this operation. revalidatePostureTokenStr(24) - to enable revalidates EOU posture credentials of the devices with the specific posture token assigned. The value in cnnEouHostValidatePostureTokenStr is used by this operation. noRevalidatePostureTokenStr(25) - to disable the revalidation of all device with the specific posture token assigned. The value in cnnEouHostValidatePostureTokenStr is used by this operation." ::= { cnnEouHostMIBObjects 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.484.1.4.1.0 | cnnEouHostValidateAction | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.484.1.4.2 | cnnEouHostValidateIpAddrType | 1 | 1 | The type of Internet address for a detected host. |
| 1.3.6.1.4.1.9.9.484.1.4.3 | cnnEouHostValidateIpAddr | 1 | 1 | The Internet address for a detected host. The type of this address is determined by the value of the cnnEouHostValidateIpAddrTyp… |
| 1.3.6.1.4.1.9.9.484.1.4.4 | cnnEouHostValidateMacAddr, cnnEouHostVailidateMacAddr | 1 | 1 | The Mac address for a detected host. |
| 1.3.6.1.4.1.9.9.484.1.4.5 | cnnEouHostValidatePostureToken | 1 | 1 | Type of posture token for a detected host. |
| 1.3.6.1.4.1.9.9.484.1.4.6 | cnnEouHostMaxQueries | 1 | 1 | Maximum number of query entries allowed to be outstanding at any time, in the cnnEouHostQueryTable. |
| 1.3.6.1.4.1.9.9.484.1.4.7 | cnnEouHostQueryTable | 1 | 15 | A control table used to query the client host by specifying retrieval criteria for the EOU information. Each row instance in the … |
| 1.3.6.1.4.1.9.9.484.1.4.8 | cnnEouHostResultTable | 1 | 19 | A table containing current detected host information corresponding to all the completed queries set up in the cnnEouHostQueryTabl… |
| 1.3.6.1.4.1.9.9.484.1.4.9 | cnnEouHostValidatePostureTokenStr | 1 | 1 | Posture token string for a detected host. |