This table contains information about each resource owner
in the system.
Each resource owner maintains a list of resource users and
performs the following:
a) Accounting and Thresholding
Accounting and thresholding involves accounting of
resources allocated to each resource user and using
threshold limits for notifying resource user(s) and
resource usage monitor(s) about violations. Accounting
is done by each resource owner.
The ERM framework allows user to configure thresholding
values for each resource owner. When resource utilization
of a resource owner exceeds an applied threshold value,
the resource owner will send notification to relevant
resource user(s).
b) Notifications Sent and Actions Taken
In case of system global thresholding, whenever total
resource utilization of a resource owner exceeds an applied
rising threshold value, the resource owner will send an 'up'
notification to the ERM framework. Whenever total resource
utilization of the same resource owner falls below
the corresponding falling threshold value (after crossing
the rising threshold value), the resource owner will sent
a 'down' notification to the ERM framework.
On receiving the 'up' notification, resource user(s)
is(are) expected to take appropriate action by freeing
the resource or limiting the resource consumption.
The resource owner may restrain from allocating
resource to the resource user(s) in case of the
resource user(s) not taking any action.
Parsed from file CISCO-ERM-MIB.mib
Module: CISCO-ERM-MIB
This table contains information about each resource owner
in the system.
Each resource owner maintains a list of resource users and
performs the following:
a) Accounting and Thresholding
Accounting and thresholding involves accounting of
resources allocated to each resource user and using
threshold limits for notifying resource user(s) and
resource usage monitor(s) about violations. Accounting
is done by each resource owner.
The ERM framework allows user to configure thresholding
values for each resource owner. When resource utilization
of a resource owner exceeds an applied threshold value,
the resource owner will send notification to relevant
resource user(s).
b) Notifications Sent and Actions Taken
In case of system global thresholding, whenever total
resource utilization of a resource owner exceeds an applied
rising threshold value, the resource owner will send an 'up'
notification to the ERM framework. Whenever total resource
utilization of the same resource owner falls below
the corresponding falling threshold value (after crossing
the rising threshold value), the resource owner will sent
a 'down' notification to the ERM framework.
On receiving the 'up' notification, resource user(s)
is(are) expected to take appropriate action by freeing
the resource or limiting the resource consumption.
The resource owner may restrain from allocating
resource to the resource user(s) in case of the
resource user(s) not taking any action.
This table contains information about each resource owner
in the system.
Each resource owner maintains a list of resource users and
performs the following:
a) Accounting and Thresholding
Accounting and thresholding involves accounting of
resources allocated to each resource user and using
threshold limits for notifying resource user(s) and
resource usage monitor(s) about violations. Accounting
is done by each resource owner.
The ERM framework allows user to configure thresholding
values for each resource owner. When resource utilization
of a resource owner exceeds an applied threshold value,
the resource owner will send notification to relevant
resource user(s).
b) Notifications Sent and Actions Taken
In case of system global thresholding, whenever total
resource utilization of a resource owner exceeds an applied
rising threshold value, the resource owner will send an 'up'
notification to the ERM framework. Whenever total resource
utilization of the same resource owner falls below
the corresponding falling threshold value (after crossing
the rising threshold value), the resource owner will sent
a 'down' notification to the ERM framework.
On receiving the 'up' notification, resource user(s)
is(are) expected to take appropriate action by freeing
the resource or limiting the resource consumption.
The resource owner may restrain from allocating
resource to the resource user(s) in case of the
resource user(s) not taking any action.
Parsed from file CISCO-ERM-MIB.my.txt
Company: None
Module: CISCO-ERM-MIB
This table contains information about each resource owner
in the system.
Each resource owner maintains a list of resource users and
performs the following:
a) Accounting and Thresholding
Accounting and thresholding involves accounting of
resources allocated to each resource user and using
threshold limits for notifying resource user(s) and
resource usage monitor(s) about violations. Accounting
is done by each resource owner.
The ERM framework allows user to configure thresholding
values for each resource owner. When resource utilization
of a resource owner exceeds an applied threshold value,
the resource owner will send notification to relevant
resource user(s).
b) Notifications Sent and Actions Taken
In case of system global thresholding, whenever total
resource utilization of a resource owner exceeds an applied
rising threshold value, the resource owner will send an 'up'
notification to the ERM framework. Whenever total resource
utilization of the same resource owner falls below
the corresponding falling threshold value (after crossing
the rising threshold value), the resource owner will sent
a 'down' notification to the ERM framework.
On receiving the 'up' notification, resource user(s)
is(are) expected to take appropriate action by freeing
the resource or limiting the resource consumption.
The resource owner may restrain from allocating
resource to the resource user(s) in case of the
resource user(s) not taking any action.
cermResOwnerTable OBJECT-TYPE SYNTAX SEQUENCE OF CermResOwnerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about each resource owner in the system. Each resource owner maintains a list of resource users and performs the following: a) Accounting and Thresholding Accounting and thresholding involves accounting of resources allocated to each resource user and using threshold limits for notifying resource user(s) and resource usage monitor(s) about violations. Accounting is done by each resource owner. The ERM framework allows user to configure thresholding values for each resource owner. When resource utilization of a resource owner exceeds an applied threshold value, the resource owner will send notification to relevant resource user(s). b) Notifications Sent and Actions Taken In case of system global thresholding, whenever total resource utilization of a resource owner exceeds an applied rising threshold value, the resource owner will send an 'up' notification to the ERM framework. Whenever total resource utilization of the same resource owner falls below the corresponding falling threshold value (after crossing the rising threshold value), the resource owner will sent a 'down' notification to the ERM framework. On receiving the 'up' notification, resource user(s) is(are) expected to take appropriate action by freeing the resource or limiting the resource consumption. The resource owner may restrain from allocating resource to the resource user(s) in case of the resource user(s) not taking any action." ::= { cermStats 1 }
cermResOwnerTable OBJECT-TYPE SYNTAX SEQUENCE OF CermResOwnerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about each resource owner in the system. Each resource owner maintains a list of resource users and performs the following: a) Accounting and Thresholding Accounting and thresholding involves accounting of resources allocated to each resource user and using threshold limits for notifying resource user(s) and resource usage monitor(s) about violations. Accounting is done by each resource owner. The ERM framework allows user to configure thresholding values for each resource owner. When resource utilization of a resource owner exceeds an applied threshold value, the resource owner will send notification to relevant resource user(s). b) Notifications Sent and Actions Taken In case of system global thresholding, whenever total resource utilization of a resource owner exceeds an applied rising threshold value, the resource owner will send an 'up' notification to the ERM framework. Whenever total resource utilization of the same resource owner falls below the corresponding falling threshold value (after crossing the rising threshold value), the resource owner will sent a 'down' notification to the ERM framework. On receiving the 'up' notification, resource user(s) is(are) expected to take appropriate action by freeing the resource or limiting the resource consumption. The resource owner may restrain from allocating resource to the resource user(s) in case of the resource user(s) not taking any action." ::= { cermStats 1 }
Vendor: Cisco
Module: CISCO-ERM-MIB
[Automatically extracted from oidview.com]
cermResOwnerTable OBJECT-TYPE SYNTAX SEQUENCE OF CermResOwnerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about each resource owner in the system. Each resource owner maintains a list of resource users and performs the following: a) Accounting and Thresholding Accounting and thresholding involves accounting of resources allocated to each resource user and using threshold limits for notifying resource user(s) and resource usage monitor(s) about violations. Accounting is done by each resource owner. The ERM framework allows user to configure thresholding values for each resource owner. When resource utilization of a resource owner exceeds an applied threshold value, the resource owner will send notification to relevant resource user(s). b) Notifications Sent and Actions Taken In case of system global thresholding, whenever total resource utilization of a resource owner exceeds an applied rising threshold value, the resource owner will send an 'up' notification to the ERM framework. Whenever total resource utilization of the same resource owner falls below the corresponding falling threshold value (after crossing the rising threshold value), the resource owner will sent a 'down' notification to the ERM framework. On receiving the 'up' notification, resource user(s) is(are) expected to take appropriate action by freeing the resource or limiting the resource consumption. The resource owner may restrain from allocating resource to the resource user(s) in case of the resource user(s) not taking any action." ::= { cermStats 1 }
cermResOwnerTable OBJECT-TYPE SYNTAX SEQUENCE OF CermResOwnerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about each resource owner in the system. Each resource owner maintains a list of resource users and performs the following: a) Accounting and Thresholding Accounting and thresholding involves accounting of resources allocated to each resource user and using threshold limits for notifying resource user(s) and resource usage monitor(s) about violations. Accounting is done by each resource owner. The ERM framework allows user to configure thresholding values for each resource owner. When resource utilization of a resource owner exceeds an applied threshold value, the resource owner will send notification to relevant resource user(s). b) Notifications Sent and Actions Taken In case of system global thresholding, whenever total resource utilization of a resource owner exceeds an applied rising threshold value, the resource owner will send an 'up' notification to the ERM framework. Whenever total resource utilization of the same resource owner falls below the corresponding falling threshold value (after crossing the rising threshold value), the resource owner will sent a 'down' notification to the ERM framework. On receiving the 'up' notification, resource user(s) is(are) expected to take appropriate action by freeing the resource or limiting the resource consumption. The resource owner may restrain from allocating resource to the resource user(s) in case of the resource user(s) not taking any action." ::= { cermStats 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.510.1.2.1.1 | cermResOwnerEntry | 7 | 7 | An entry containing information about a particular resource owner. This entry includes resource owner name, measurement units for… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.510.1.2.2 | cermResOwnerSubTypeTable | 1 | 7 | This table contains information about each sub-type for each resource owner in the cermResOwnerTable. For example, lets consider … |
| 1.3.6.1.4.1.9.9.510.1.2.3 | cermResOwnerSubTypeThresholdTable | 1 | 6 | This table contains information about each applied global threshold configuration for each resource owner sub-type in the system. |
| 1.3.6.1.4.1.9.9.510.1.2.4 | cermResUserTypeTable | 1 | 7 | This table contains information about each resource user type in the system. This table will have one entry for each resource use… |
| 1.3.6.1.4.1.9.9.510.1.2.5 | cermResUserTable | 1 | 5 | A table which contains information about each resource user in the system. This table will have one entry for each resource user … |
| 1.3.6.1.4.1.9.9.510.1.2.6 | cermResGroupTable | 1 | 4 | This table contains information about each resource group in the system. This table will have one entry for each resource group i… |
| 1.3.6.1.4.1.9.9.510.1.2.7 | cermResGroupResUserTable | 1 | 2 | This table has list of resource users present in each resource group. |
| 1.3.6.1.4.1.9.9.510.1.2.8 | cermResOwnerResUserOrGroupTable | 1 | 9 | This table contains information about each resource owner sub-type and resource user/group relationship. |
| 1.3.6.1.4.1.9.9.510.1.2.9 | cermResOwnerResUserOrGroupThresholdTable | 1 | 8 | This table contains information about each applied threshold configuration for each resource owner sub-type <-> resource user/group … |
| 1.3.6.1.4.1.9.9.510.1.2.10 | cermResUserTypeResOwnerTable | 1 | 2 | This table contains an entry for each resource user type and resource owner relationship in the system. This table would be usefu… |
| 1.3.6.1.4.1.9.9.510.1.2.11 | cermResMonitorTable | 1 | 4 | This table contains information about each resource monitor in the system. |
| 1.3.6.1.4.1.9.9.510.1.2.12 | cermResMonitorResOwnerResUserTable | 1 | 5 | This table contains the following information: 1) resource owners being watched by each resource monitor. 2) resource users being… |
| 1.3.6.1.4.1.9.9.510.1.2.13 | cermResMonitorPolicyTable | 1 | 2 | This table contains an entry for each resource policy being watched by each resource monitor in the system. This table will be us… |