This object represents the address of the secondary
controller that the APs will join. The name and address
should be provided in the same set request. An address
of all zeros will unset the secondary controller.
This object represents the address of the secondary
controller that the APs will join. The name and address
should be provided in the same set request. An address
of all zeros will unset the secondary controller.
cLApGlobalSecondaryControllerAddress OBJECT-TYPE SYNTAX InetAddress ACCESS read-write STATUS mandatory DESCRIPTION "This object represents the address of the secondary controller that the APs will join. The name and address should be provided in the same set request. An address of all zeros will unset the secondary controller." ::= { ciscoLwappApGlobal 8 }
cLApGlobalSecondaryControllerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the address of the secondary controller that the APs will join. The name and address should be provided in the same set request. An address of all zeros will unset the secondary controller." ::= { ciscoLwappApGlobal 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.513.1.3.1 | cLApFastHbTimerTable | 1 | 4 | This table contains entries for AP fast heartbeat timers configured in the controller. At startup, all the entries in this table … |
| 1.3.6.1.4.1.9.9.513.1.3.3 | cLApPrimaryDiscoveryTimeout | 0 | 0 | This object represents the timeout for the primary AP discovery. |
| 1.3.6.1.4.1.9.9.513.1.3.4 | cLApGlobalPrimaryControllerAddressType | 0 | 0 | This object represents the type of the primary controller's address made available through cLApPrimaryControllerAddress. |
| 1.3.6.1.4.1.9.9.513.1.3.5 | cLApGlobalPrimaryControllerAddress | 0 | 0 | This object represents the address of the primary controller that the APs will join. The name and address should be provided in t… |
| 1.3.6.1.4.1.9.9.513.1.3.6 | cLApGlobalPrimaryControllerName | 0 | 0 | This object represents the name of the primary controller that the APs will join. |
| 1.3.6.1.4.1.9.9.513.1.3.7 | cLApGlobalSecondaryControllerAddressType | 0 | 0 | This object represents the type of the secondary controller's address made available through cLApSecondaryControllerAddress. |
| 1.3.6.1.4.1.9.9.513.1.3.9 | cLApGlobalSecondaryControllerName | 0 | 0 | This object represents the name of the secondary controller that the APs will join. |
| 1.3.6.1.4.1.9.9.513.1.3.10 | cLApGlobalFailoverPriority | 0 | 0 | This object represents the Global AP Failover priority. If Enabled, Priorities will be considered of the APs which wishes to join… |
| 1.3.6.1.4.1.9.9.513.1.3.11 | cLApGlobalTcpMss | 0 | 0 | This object represents the Global AP TCP MSS value. Permissible value are between 536 and 1363. This will also enable the global … |
| 1.3.6.1.4.1.9.9.513.1.3.12 | cLApGlobalDot11IfTable | 1 | 2 | This table is used to configure the global dot11 parameters per slot id, represented by cLApDot11IfSlotId, of the radio interface… |
| 1.3.6.1.4.1.9.9.513.1.3.13 | cLApGlobalEthernetIfTable | 1 | 2 | This table is used to configure the global parameters on Ethernet interfaces of all the APs joined with the controller. |
| 1.3.6.1.4.1.9.9.513.1.3.14 | cLApGlobalRetransmitCount | 0 | 0 | This object specifies the retransmission count for the Control Packet of all the Access Points, joined to this controller. This v… |
| 1.3.6.1.4.1.9.9.513.1.3.15 | cLApGlobalRetransmitTimeout | 0 | 0 | This object specifies the retransmission timeout for the Control Packet of all the Access Points, joined to this controller. This… |