Reference record for OID 1.3.6.1.4.1.9.9.522.1.1.1.1.2



parent
1.3.6.1.4.1.9.9.522.1.1.1.1 (cLD11ClientCalibEntry)
node code
2
node name
cLD11ClientCalibBeaconInterval
dot oid
1.3.6.1.4.1.9.9.522.1.1.1.1.2
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappDot11ClientCalibMIB(522) ciscoLwappDot11ClientCalibMIBObjects(1) cldccConfig(1) cLD11ClientCalibTable(1) cLD11ClientCalibEntry(1) cLD11ClientCalibBeaconInterval(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappDot11ClientCalibMIB(522) ciscoLwappDot11ClientCalibMIBObjects(1) cldccConfig(1) cLD11ClientCalibTable(1) cLD11ClientCalibEntry(1) cLD11ClientCalibBeaconInterval(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappDot11ClientCalibMIB(522) ciscoLwappDot11ClientCalibMIBObjects(1) cldccConfig(1) cLD11ClientCalibTable(1) cLD11ClientCalibEntry(1) cLD11ClientCalibBeaconInterval(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappDot11ClientCalibMIB(522) ciscoLwappDot11ClientCalibMIBObjects(1) cldccConfig(1) cLD11ClientCalibTable(1) cLD11ClientCalibEntry(1) cLD11ClientCalibBeaconInterval(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappDot11ClientCalibMIB(522) ciscoLwappDot11ClientCalibMIBObjects(1) cldccConfig(1) cLD11ClientCalibTable(1) cLD11ClientCalibEntry(1) cLD11ClientCalibBeaconInterval(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappDot11ClientCalibMIB(522) ciscoLwappDot11ClientCalibMIBObjects(1) cldccConfig(1) cLD11ClientCalibTable(1) cLD11ClientCalibEntry(1) cLD11ClientCalibBeaconInterval(2)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappDot11ClientCalibMIB/ciscoLwappDot11ClientCalibMIBObjects/cldccConfig/cLD11ClientCalibTable/cLD11ClientCalibEntry/cLD11ClientCalibBeaconInterval
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappDot11ClientCalibMIB/ciscoLwappDot11ClientCalibMIBObjects/cldccConfig/cLD11ClientCalibTable/cLD11ClientCalibEntry/cLD11ClientCalibBeaconInterval
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappDot11ClientCalibMIB/ciscoLwappDot11ClientCalibMIBObjects/cldccConfig/cLD11ClientCalibTable/cLD11ClientCalibEntry/cLD11ClientCalibBeaconInterval
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappDot11ClientCalibMIB/ciscoLwappDot11ClientCalibMIBObjects/cldccConfig/cLD11ClientCalibTable/cLD11ClientCalibEntry/cLD11ClientCalibBeaconInterval
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappDot11ClientCalibMIB/ciscoLwappDot11ClientCalibMIBObjects/cldccConfig/cLD11ClientCalibTable/cLD11ClientCalibEntry/cLD11ClientCalibBeaconInterval
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappDot11ClientCalibMIB/ciscoLwappDot11ClientCalibMIBObjects/cldccConfig/cLD11ClientCalibTable/cLD11ClientCalibEntry/cLD11ClientCalibBeaconInterval
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/522/1/1/1/1/2

    Description by circitor

    This object specifies the time interval, expressed
    here in hundredths of a second at which an AP
    issues radio measurement request messages to a
    client for every SSID. It is not recommended to
    configure values less than 10 seconds (1000).
    The value configured through this object is
    reflected in the operation of the LWAPP APs only if
    cLD11ClientCalibBeaconEnabled is set to 'true'.

    Parsed from file CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB.mib
    Module: CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB

    Description by cisco_v1

    This object specifies the time interval, expressed
    here in hundredths of a second at which an AP
    issues radio measurement request messages to a
    client for every SSID. It is not recommended to
    configure values less than 10 seconds (1000).
    The value configured through this object is
    reflected in the operation of the LWAPP APs only if
    cLD11ClientCalibBeaconEnabled is set to 'true'.

    This object has been deprecated and is replaced by the
    object cLD11ClientCalibBeaconIntervalExt.

    Description by mibdepot

    This object specifies the time interval, expressed
    here in hundredths of a second at which an AP
    issues radio measurement request messages to a
    client for every SSID. It is not recommended to
    configure values less than 10 seconds (1000).
    The value configured through this object is
    reflected in the operation of the LWAPP APs only if
    cLD11ClientCalibBeaconEnabled is set to 'true'.

    Parsed from file CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB.my.txt
    Company: None
    Module: CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB

    Description by cisco

    This object specifies the time interval, expressed
    here in hundredths of a second at which an AP
    issues radio measurement request messages to a
    client for every SSID. It is not recommended to
    configure values less than 10 seconds (1000).
    The value configured through this object is
    reflected in the operation of the LWAPP APs only if
    cLD11ClientCalibBeaconEnabled is set to 'true'.

    This object has been deprecated and is replaced by the
    object cLD11ClientCalibBeaconIntervalExt.

    Information by circitor

    cLD11ClientCalibBeaconInterval OBJECT-TYPE
        SYNTAX     TimeInterval (400..3240000)
        UNITS      "hundredths-seconds"
        MAX-ACCESS read-create
        STATUS     current 
        DESCRIPTION
                "This object specifies the time interval, expressed
                here in hundredths of a second at which an AP
                issues radio measurement request messages to a
                client for every SSID.  It is not recommended to
                configure values less than 10 seconds (1000).
                The value configured through this object is
                reflected in the operation of the LWAPP APs only if
                cLD11ClientCalibBeaconEnabled is set to 'true'. "
        DEFVAL { 60000 }
        ::= { cLD11ClientCalibEntry 2 }

    Information by cisco_v1

    cLD11ClientCalibBeaconInterval OBJECT-TYPE
    SYNTAX TimeInterval(400..3240000)



    ACCESS read-write
    STATUS deprecated
    DESCRIPTION
        "This object specifies the time interval, expressed
        here in hundredths of a second at which an AP
        issues radio measurement request messages to a
        client for every SSID.  It is not recommended to
        configure values less than 10 seconds (1000).
        The value configured through this object is
        reflected in the operation of the LWAPP APs only if
        cLD11ClientCalibBeaconEnabled is set to 'true'.
        
        This object has been deprecated and is replaced by the
        object cLD11ClientCalibBeaconIntervalExt."
    DEFVAL { 60000 }
    ::= { cLD11ClientCalibEntry 2 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    cLD11ClientCalibBeaconInterval OBJECT-TYPE
        SYNTAX     TimeInterval (400..3240000)
        UNITS      "hundredths-seconds"
        MAX-ACCESS read-create
        STATUS     current 
        DESCRIPTION
                "This object specifies the time interval, expressed
                here in hundredths of a second at which an AP
                issues radio measurement request messages to a
                client for every SSID.  It is not recommended to
                configure values less than 10 seconds (1000).
                The value configured through this object is
                reflected in the operation of the LWAPP APs only if
                cLD11ClientCalibBeaconEnabled is set to 'true'. "
        DEFVAL { 60000 }
        ::= { cLD11ClientCalibEntry 2 }

    Information by cisco

    cLD11ClientCalibBeaconInterval OBJECT-TYPE
    SYNTAX          TimeInterval (400..3240000)
    UNITS           "hundredths-seconds"
    MAX-ACCESS      read-create
    STATUS          deprecated
    DESCRIPTION
        "This object specifies the time interval, expressed
        here in hundredths of a second at which an AP
        issues radio measurement request messages to a
        client for every SSID.  It is not recommended to
        configure values less than 10 seconds (1000).
        The value configured through this object is
        reflected in the operation of the LWAPP APs only if
        cLD11ClientCalibBeaconEnabled is set to 'true'.

        This object has been deprecated and is replaced by the
        object cLD11ClientCalibBeaconIntervalExt."
    DEFVAL          { 60000 } 
    ::= { cLD11ClientCalibEntry 2 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (7)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.522.1.1.1.1.1 cLD11ClientCalibMacAddress 0 0 This object specifies the MAC address of the
    802.11 wireless client for which the
    calibration parameters in this entry are
    applica…
    1.3.6.1.4.1.9.9.522.1.1.1.1.3 cLD11ClientCalibRowStatus 0 0 The object that represents the status of a
    specific instance of a row in this table.
    Initially set to a value of 'createAndGo' by…
    1.3.6.1.4.1.9.9.522.1.1.1.1.4 cLD11ClientCalibNumberOfRadios 0 0 This object specifies the number of radios
    used in this calibration.
    1.3.6.1.4.1.9.9.522.1.1.1.1.5 cLD11ClientCalibNumberOfSamples 0 0 This object specifies the number of RSSI samples for
    a given radio, used in this calibration.
    1.3.6.1.4.1.9.9.522.1.1.1.1.6 cLD11ClientCalibSamplesCollected 0 0 This object indicates the number of
    samples available for this client.
    1.3.6.1.4.1.9.9.522.1.1.1.1.7 cLD11ClientCalibBeaconIntervalExt 0 0 This object specifies the time interval, expressed
    here in hundredths of a second at which an AP
    issues radio measurement request…
    1.3.6.1.4.1.9.9.522.1.1.1.1.8 cLD11ClientCalibStorageType 0 0 This object specifies the storage type of this
    conceptual row.