Reference record for OID 1.3.6.1.4.1.9.9.524.1.2.7



parent
1.3.6.1.4.1.9.9.524.1.2 (cLQd11bCACConfig)
node code
7
node name
cLQd11bGprProbeInterval
dot oid
1.3.6.1.4.1.9.9.524.1.2.7
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappQosMIB(524) ciscoLwappQosMIBObjects(1) cLQd11bCACConfig(2) cLQd11bGprProbeInterval(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappQosMIB(524) ciscoLwappQosMIBObjects(1) cLQd11bCACConfig(2) cLQd11bGprProbeInterval(7)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappQosMIB(524) ciscoLwappQosMIBObjects(1) cLQd11bCACConfig(2) cLQd11bGprProbeInterval(7)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappQosMIB(524) ciscoLwappQosMIBObjects(1) cLQd11bCACConfig(2) cLQd11bGprProbeInterval(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappQosMIB(524) ciscoLwappQosMIBObjects(1) cLQd11bCACConfig(2) cLQd11bGprProbeInterval(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappQosMIB(524) ciscoLwappQosMIBObjects(1) cLQd11bCACConfig(2) cLQd11bGprProbeInterval(7)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappQosMIB/ciscoLwappQosMIBObjects/cLQd11bCACConfig/cLQd11bGprProbeInterval
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappQosMIB/ciscoLwappQosMIBObjects/cLQd11bCACConfig/cLQd11bGprProbeInterval
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappQosMIB/ciscoLwappQosMIBObjects/cLQd11bCACConfig/cLQd11bGprProbeInterval
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappQosMIB/ciscoLwappQosMIBObjects/cLQd11bCACConfig/cLQd11bGprProbeInterval
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappQosMIB/ciscoLwappQosMIBObjects/cLQd11bCACConfig/cLQd11bGprProbeInterval
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappQosMIB/ciscoLwappQosMIBObjects/cLQd11bCACConfig/cLQd11bGprProbeInterval
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/524/1/2/7

    Description by circitor

    This object is used to set GPR probe interval
    period to be used by all 802.11b/g interfaces in the
    controller, when the radios are advertising any
    WLAN with GPR support enabled.

    Please note that the write operation on this
    object will be successful only if the 802.11b/g
    network is not operational. The value configured
    through this object takes effect when the 802.11b/g
    network is enabled.

    Parsed from file CISCO-LWAPP-QOS-MIB.mib
    Module: CISCO-LWAPP-QOS-MIB

    Description by cisco_v1

    This object is used to set GPR probe interval
    period to be used by all 802.11b/g interfaces in the
    controller, when the radios are advertising any
    WLAN with GPR support enabled.

    Please note that the write operation on this
    object will be successful only if the 802.11b/g
    network is not operational. The value configured
    through this object takes effect when the 802.11b/g
    network is enabled.

    Description by mibdepot

    This object is used to set GPR probe interval
    period to be used by all 802.11b/g interfaces in the
    controller, when the radios are advertising any
    WLAN with GPR support enabled.

    Please note that the write operation on this
    object will be successful only if the 802.11b/g
    network is not operational. The value configured
    through this object takes effect when the 802.11b/g
    network is enabled.

    Parsed from file CISCO-LWAPP-QOS-MIB.my.txt
    Company: None
    Module: CISCO-LWAPP-QOS-MIB

    Description by cisco

    This object is used to set GPR probe interval
    period to be used by all 802.11b/g interfaces in the
    controller, when the radios are advertising any
    WLAN with GPR support enabled.

    Please note that the write operation on this
    object will be successful only if the 802.11b/g
    network is not operational. The value configured
    through this object takes effect when the 802.11b/g
    network is enabled.

    Information by circitor

    cLQd11bGprProbeInterval OBJECT-TYPE
    SYNTAX          Unsigned32 (10..100 )
    UNITS           "TU"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to set GPR probe interval
        period to be used by all 802.11b/g interfaces in the 
        controller, when the radios are advertising any 
        WLAN with GPR support enabled.

        Please note that the write operation on this
        object will be successful only if the 802.11b/g
        network is not operational.  The value configured
        through this object takes effect when the 802.11b/g
        network is enabled."
    DEFVAL          { 10 } 
    ::= { cLQd11bCACConfig 7 }

    Information by cisco_v1

    cLQd11bGprProbeInterval OBJECT-TYPE
    SYNTAX Gauge(10..100)


    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used to set GPR probe interval
        period to be used by all 802.11b/g interfaces in the 
        controller, when the radios are advertising any 
        WLAN with GPR support enabled.
        
        Please note that the write operation on this
        object will be successful only if the 802.11b/g
        network is not operational.  The value configured
        through this object takes effect when the 802.11b/g
        network is enabled."
    DEFVAL { 10 }
    ::= { cLQd11bCACConfig 7 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-LWAPP-QOS-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    cLQd11bGprProbeInterval OBJECT-TYPE
    SYNTAX          Unsigned32 (10..100 )
    UNITS           "TU"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to set GPR probe interval
        period to be used by all 802.11b/g interfaces in the 
        controller, when the radios are advertising any 
        WLAN with GPR support enabled.

        Please note that the write operation on this
        object will be successful only if the 802.11b/g
        network is not operational.  The value configured
        through this object takes effect when the 802.11b/g
        network is enabled."
    DEFVAL          { 10 } 
    ::= { cLQd11bCACConfig 7 }

    Information by cisco

    cLQd11bGprProbeInterval OBJECT-TYPE
    SYNTAX          Unsigned32 (10..100)
    UNITS           "TU"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to set GPR probe interval
        period to be used by all 802.11b/g interfaces in the 
        controller, when the radios are advertising any 
        WLAN with GPR support enabled.

        Please note that the write operation on this
        object will be successful only if the 802.11b/g
        network is not operational.  The value configured
        through this object takes effect when the 802.11b/g
        network is enabled."
    DEFVAL          { 10 } 
    ::= { cLQd11bCACConfig 7 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.524.1.2.7.0 cLQd11bGprProbeInterval 0 0 None

    Brothers (11)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.524.1.2.1 cLQd11bVoiceAdmCtrlSupport 1 1 This object is used to enable or disable admission
    control for voice traffic flowing through the
    802.11b/g interfaces in the cont…
    1.3.6.1.4.1.9.9.524.1.2.2 cLQd11bVoiceMaxAdmBandwidth 1 1 This object denotes the maximum bandwidth that
    can be allocated by controller for voice traffic
    when admission control is enabled…
    1.3.6.1.4.1.9.9.524.1.2.3 cLQd11bVoiceMaxRoamBandwidth 1 1 This object represents the bandwidth relative
    to the maximum allocated bandwidth indicated by
    cLQd11bVoiceMaxAdmBandwidth, that c…
    1.3.6.1.4.1.9.9.524.1.2.4 cLQd11bVideoAdmCtrlSupport 1 1 This object is used to enable or disable admission
    control for video traffic flowing through the
    802.11b/g interfaces in the cont…
    1.3.6.1.4.1.9.9.524.1.2.5 cLQd11bVideoMaxAdmBandwidth 1 1 This object denotes the maximum bandwidth that
    can be allocated by controller for video traffic when
    admission control is enabled…
    1.3.6.1.4.1.9.9.524.1.2.6 cLQd11bVideoMaxRoamBandwidth 1 1 This objects represents the bandwidth relative
    to the maximum allocated bandwidth indicated by
    cLQd11bVideoMaxAdmBandwidth, that …
    1.3.6.1.4.1.9.9.524.1.2.8 cLQd11bVoiceCtrl 1 1 When admission control is enabled these parameters
    can be modified.
    loadBased - controller will reserve and manage
    max-bandwidth a…
    1.3.6.1.4.1.9.9.524.1.2.9 cLQd11bExpeditedBw 1 1 This object specifies if expedited BW feature is
    enabled or not.
    A value of 'true' will ensure that the APs advertise
    the expedite…
    1.3.6.1.4.1.9.9.524.1.2.10 cLQd11bEdcaProfile 0 0 This object specifies the EDCA profile to be used
    in EDCA Parameter set element. See glossary for EDCA.
    wmmDefault - WMM defa…
    1.3.6.1.4.1.9.9.524.1.2.11 cLQd11bMacOptimization 0 0 This object specifies MAC enhancements for voice,
    resulting in improvement in number of voice calls
    serviced per access point.
    A v…
    1.3.6.1.4.1.9.9.524.1.2.12 cLQd11bMaxCallLimit 0 0 This object specifies the max number of CAC Voice Calls
    allowed on dot11b radio band.
    Value of zero denotes no limit.