This object represents the entPhysicalIndex of the device
where the action is being executed. This object is mainly
used in devices where one device is acting as a master and
rest of the devices as slaves. The master device is
responsible for SNMP communication with the management
application. Examples include stackable switches, devices
with route processor and line card configuration. If this
object is not set, the license action will be executed on
the master device. Note: This object need not be set if
there is a stand alone device
This object represents the entPhysicalIndex of the device
where the action is being executed. This object is mainly
used in devices where one device is acting as a master and
rest of the devices as slaves. The master device is
responsible for SNMP communication with the management
application. Examples include stackable switches, devices
with route processor and line card configuration. If this
object is not set, the license action will be executed on
the master device. Note: This object need not be set if
there is a stand alone device
Parsed from file CISCO-LICENSE-MGMT-MIB.my.txt
Company: None
Module: CISCO-LICENSE-MGMT-MIB
This object represents the entPhysicalIndex of the device
where the action is being executed. This object is mainly
used in devices where one device is acting as a master and
rest of the devices as slaves. The master device is
responsible for SNMP communication with the management
application. Examples include stackable switches, devices
with route processor and line card configuration. If this
object is not set, the license action will be executed on
the master device. Note: This object need not be set if
there is a stand alone device
clmgmtLicenseActionEntPhysicalIndex OBJECT-TYPE SYNTAX PhysicalIndexOrZero ACCESS read-write STATUS mandatory DESCRIPTION "This object represents the entPhysicalIndex of the device where the action is being executed. This object is mainly used in devices where one device is acting as a master and rest of the devices as slaves. The master device is responsible for SNMP communication with the management application. Examples include stackable switches, devices with route processor and line card configuration. If this object is not set, the license action will be executed on the master device. Note: This object need not be set if there is a stand alone device" DEFVAL { 0 } ::= { clmgmtLicenseActionEntry 2 }
Vendor: Cisco
Module: CISCO-LICENSE-MGMT-MIB
[Automatically extracted from oidview.com]
clmgmtLicenseActionEntPhysicalIndex OBJECT-TYPE SYNTAX PhysicalIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the entPhysicalIndex of the device where the action is being executed. This object is mainly used in devices where one device is acting as a master and rest of the devices as slaves. The master device is responsible for SNMP communication with the management application. Examples include stackable switches, devices with route processor and line card configuration. If this object is not set, the license action will be executed on the master device. Note: This object need not be set if there is a stand alone device" DEFVAL { 0 } ::= { clmgmtLicenseActionEntry 2 }
clmgmtLicenseActionEntPhysicalIndex OBJECT-TYPE SYNTAX PhysicalIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the entPhysicalIndex of the device where the action is being executed. This object is mainly used in devices where one device is acting as a master and rest of the devices as slaves. The master device is responsible for SNMP communication with the management application. Examples include stackable switches, devices with route processor and line card configuration. If this object is not set, the license action will be executed on the master device. Note: This object need not be set if there is a stand alone device" DEFVAL { 0 } ::= { clmgmtLicenseActionEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.543.1.1.2.1.1 | clmgmtLicenseActionIndex | 0 | 0 | This object uniquely identifies a row in clmgmtLicenseActionTable. The management application should choose this value by reading… |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.3 | clmgmtLicenseActionTransferProtocol | 0 | 0 | This object represents the transfer protocol to be used when copying files as specified in the following objects. 1. clmgmtLicens… |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.4 | clmgmtLicenseServerAddressType | 0 | 0 | This object indicates the transport type of the address contained in clmgmtLicenseServerAddress object. This must be set when clm… |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.5 | clmgmtLicenseServerAddress | 0 | 0 | This object indicates the ip address of the server from which the files must be read or written to if clmgmtLicenseActionTransfer… |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.6 | clmgmtLicenseServerUsername | 0 | 0 | This object indicates the remote user name for accessing files via ftp, rcp, sftp or scp protocols. This object must be set when … |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.7 | clmgmtLicenseServerPassword | 0 | 0 | This object indicates the password used by ftp, sftp or scp for copying a file to/from an ftp/sftp/scp server. This object must b… |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.8 | clmgmtLicenseFile | 0 | 0 | This object represents the location of the license file on the server identified by clmgmtLicenseServerAddress. This object MUST … |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.9 | clmgmtLicenseStore | 0 | 0 | This object represents the clmgmtLicenseStoreIndex of the license store to use within the device. The license store can be a loca… |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.10 | clmgmtLicenseActionLicenseIndex | 0 | 0 | This object indicates the the license index of the license that is the subject of this action. This is used for identifying a lic… |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.11 | clmgmtLicensePermissionTicketFile | 0 | 0 | This object indicates the file name of the permission ticket. This object need to be set only if clmgmtLicenseAction is set to pr… |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.12 | clmgmtLicenseRehostTicketFile | 0 | 0 | This object indicates the file where the rehost ticket generated by the device need to be exported to. The rehost ticket is gener… |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.13 | clmgmtLicenseBackupFile | 0 | 0 | This object indicates the file where all the licenses in the device need to be backed up. This object need to be set only if clmg… |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.14 | clmgmtLicenseStopOnFailure | 0 | 0 | This object indicates whether the license action should stop if the action on a license fails. This object is applicable only if … |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.15 | clmgmtLicenseAction | 0 | 0 | This object indicates the the command/action to be executed. Command Remarks noOp(1) … |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.16 | clmgmtLicenseActionState | 0 | 0 | This object indicates the state of this license action. |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.17 | clmgmtLicenseJobQPosition | 0 | 0 | This object represents the position of the action in the license action job queue that is maintained internally. Only actions in … |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.18 | clmgmtLicenseActionFailCause | 0 | 0 | This object indicates the reason for this license action failure. The value of this object is valid only when clmgmtLicenseAction… |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.19 | clmgmtLicenseActionStorageType | 0 | 0 | This object indicates the storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write… |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.20 | clmgmtLicenseActionRowStatus | 0 | 0 | This object indicates the the status of this table entry. Once the entry status is set to active(1), the associated entry cannot … |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.21 | clmgmtLicenseAcceptEULA | 0 | 0 | This object indicates whether the End User License Agreement needed for installing the licenses is accepted. true(1) - EULA is re… |
| 1.3.6.1.4.1.9.9.543.1.1.2.1.22 | clmgmtLicenseEULAFile | 0 | 0 | This object indicates the file where all the End User License Agreements (EULAs) need to be exported to. This object need to be s… |