Reference record for OID 1.3.6.1.4.1.9.9.572.1.5.1.2



parent
1.3.6.1.4.1.9.9.572.1.5.1 (crttMonIPLpdGrpStatsEntry)
node code
2
node name
crttMonIPLpdGrpStatsTargetPEAddr
dot oid
1.3.6.1.4.1.9.9.572.1.5.1.2
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoRttMonIPExtMIB(572) crttMonIPExtObjects(1) crttMonIPLpdGrpStatsTable(5) crttMonIPLpdGrpStatsEntry(1) crttMonIPLpdGrpStatsTargetPEAddr(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoRttMonIPExtMIB(572) crttMonIPExtObjects(1) crttMonIPLpdGrpStatsTable(5) crttMonIPLpdGrpStatsEntry(1) crttMonIPLpdGrpStatsTargetPEAddr(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoRttMonIPExtMIB(572) crttMonIPExtObjects(1) crttMonIPLpdGrpStatsTable(5) crttMonIPLpdGrpStatsEntry(1) crttMonIPLpdGrpStatsTargetPEAddr(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoRttMonIPExtMIB(572) crttMonIPExtObjects(1) crttMonIPLpdGrpStatsTable(5) crttMonIPLpdGrpStatsEntry(1) crttMonIPLpdGrpStatsTargetPEAddr(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoRttMonIPExtMIB(572) crttMonIPExtObjects(1) crttMonIPLpdGrpStatsTable(5) crttMonIPLpdGrpStatsEntry(1) crttMonIPLpdGrpStatsTargetPEAddr(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoRttMonIPExtMIB(572) crttMonIPExtObjects(1) crttMonIPLpdGrpStatsTable(5) crttMonIPLpdGrpStatsEntry(1) crttMonIPLpdGrpStatsTargetPEAddr(2)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoRttMonIPExtMIB/crttMonIPExtObjects/crttMonIPLpdGrpStatsTable/crttMonIPLpdGrpStatsEntry/crttMonIPLpdGrpStatsTargetPEAddr
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoRttMonIPExtMIB/crttMonIPExtObjects/crttMonIPLpdGrpStatsTable/crttMonIPLpdGrpStatsEntry/crttMonIPLpdGrpStatsTargetPEAddr
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoRttMonIPExtMIB/crttMonIPExtObjects/crttMonIPLpdGrpStatsTable/crttMonIPLpdGrpStatsEntry/crttMonIPLpdGrpStatsTargetPEAddr
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoRttMonIPExtMIB/crttMonIPExtObjects/crttMonIPLpdGrpStatsTable/crttMonIPLpdGrpStatsEntry/crttMonIPLpdGrpStatsTargetPEAddr
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoRttMonIPExtMIB/crttMonIPExtObjects/crttMonIPLpdGrpStatsTable/crttMonIPLpdGrpStatsEntry/crttMonIPLpdGrpStatsTargetPEAddr
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoRttMonIPExtMIB/crttMonIPExtObjects/crttMonIPLpdGrpStatsTable/crttMonIPLpdGrpStatsEntry/crttMonIPLpdGrpStatsTargetPEAddr
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/572/1/5/1/2

    Description by circitor

    A string which specifies the address of the target PE.
    This object, in conjunction with the
    crttMonIPLpdGrpStatsTargetPEAddrType object,
    may be used to specify either an IPv6 or an IPv4 address and is
    an alternative to the rttMonLpdGrpStatsTargetPE object, which
    can only specify an IPv4 address. In case the target is a V4
    IP address then both crttMonIPLpdGrpStatsTargetPEAddrType/
    crttMonIPLpdGrpStatsTargetPEAddr AND rttMonLpdGrpStatsTargetPE
    may be used to specify it so long as both try to specify the
    same V4 IP address. Alternatively only one of
    rttMonLpdGrpStatsTargetPE
    OR crttMonIPLpdGrpStatsTargetPEAddrType/
    crttMonIPLpdGrpStatsTargetPEAddr may be used to specify the
    V4 IP address, in which case the other may either not be
    instantiated or contain a zero length string.
    In case the the target is a V6 IP address
    then only crttMonIPLpdGrpStatsTargetPEAddrType/
    crttMonIPLpdGrpStatsTargetPEAddr must be used and
    rttMonLpdGrpStatsTargetPE may not be instantiated or
    may have a zero length string.

    Parsed from file CISCO-RTTMON-IP-EXT-MIB.mib
    Module: CISCO-RTTMON-IP-EXT-MIB

    Description by cisco_v1

    A string which specifies the address of the target PE.
    This object, in conjunction with the
    crttMonIPLpdGrpStatsTargetPEAddrType object,
    may be used to specify either an IPv6 or an IPv4 address and is
    an alternative to the rttMonLpdGrpStatsTargetPE object, which
    can only specify an IPv4 address. In case the target is a V4
    IP address then both crttMonIPLpdGrpStatsTargetPEAddrType/
    crttMonIPLpdGrpStatsTargetPEAddr AND rttMonLpdGrpStatsTargetPE
    may be used to specify it so long as both try to specify the
    same V4 IP address. Alternatively only one of
    rttMonLpdGrpStatsTargetPE
    OR crttMonIPLpdGrpStatsTargetPEAddrType/
    crttMonIPLpdGrpStatsTargetPEAddr may be used to specify the
    V4 IP address, in which case the other may either not be
    instantiated or contain a zero length string.
    In case the the target is a V6 IP address
    then only crttMonIPLpdGrpStatsTargetPEAddrType/
    crttMonIPLpdGrpStatsTargetPEAddr must be used and
    rttMonLpdGrpStatsTargetPE may not be instantiated or
    may have a zero length string.

    Description by mibdepot

    A string which specifies the address of the target PE.
    This object, in conjunction with the
    crttMonIPLpdGrpStatsTargetPEAddrType object,
    may be used to specify either an IPv6 or an IPv4 address and is
    an alternative to the rttMonLpdGrpStatsTargetPE object, which
    can only specify an IPv4 address. In case the target is a V4
    IP address then both crttMonIPLpdGrpStatsTargetPEAddrType/
    crttMonIPLpdGrpStatsTargetPEAddr AND rttMonLpdGrpStatsTargetPE
    may be used to specify it so long as both try to specify the
    same V4 IP address. Alternatively only one of
    rttMonLpdGrpStatsTargetPE
    OR crttMonIPLpdGrpStatsTargetPEAddrType/
    crttMonIPLpdGrpStatsTargetPEAddr may be used to specify the
    V4 IP address, in which case the other may either not be
    instantiated or contain a zero length string.
    In case the the target is a V6 IP address
    then only crttMonIPLpdGrpStatsTargetPEAddrType/
    crttMonIPLpdGrpStatsTargetPEAddr must be used and
    rttMonLpdGrpStatsTargetPE may not be instantiated or
    may have a zero length string.

    Parsed from file CISCO-RTTMON-IP-EXT-MIB.my.txt
    Company: None
    Module: CISCO-RTTMON-IP-EXT-MIB

    Description by cisco

    A string which specifies the address of the target PE.
    This object, in conjunction with the
    crttMonIPLpdGrpStatsTargetPEAddrType object,
    may be used to specify either an IPv6 or an IPv4 address and is
    an alternative to the rttMonLpdGrpStatsTargetPE object, which
    can only specify an IPv4 address. In case the target is a V4
    IP address then both crttMonIPLpdGrpStatsTargetPEAddrType/
    crttMonIPLpdGrpStatsTargetPEAddr AND rttMonLpdGrpStatsTargetPE
    may be used to specify it so long as both try to specify the
    same V4 IP address. Alternatively only one of
    rttMonLpdGrpStatsTargetPE
    OR crttMonIPLpdGrpStatsTargetPEAddrType/
    crttMonIPLpdGrpStatsTargetPEAddr may be used to specify the
    V4 IP address, in which case the other may either not be
    instantiated or contain a zero length string.
    In case the the target is a V6 IP address
    then only crttMonIPLpdGrpStatsTargetPEAddrType/
    crttMonIPLpdGrpStatsTargetPEAddr must be used and
    rttMonLpdGrpStatsTargetPE may not be instantiated or
    may have a zero length string.

    Information by circitor

    crttMonIPLpdGrpStatsTargetPEAddr OBJECT-TYPE
  SYNTAX      InetAddress
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
       "A string which specifies the address of the target PE. 
        This object, in conjunction with the 
        crttMonIPLpdGrpStatsTargetPEAddrType object,
        may be used to specify either an IPv6 or an IPv4 address and is
        an alternative to the rttMonLpdGrpStatsTargetPE object, which
        can only specify an IPv4 address. In case the target is a V4
        IP address then both crttMonIPLpdGrpStatsTargetPEAddrType/
        crttMonIPLpdGrpStatsTargetPEAddr AND rttMonLpdGrpStatsTargetPE
        may be used to specify it so long as both try to specify the
        same V4 IP address. Alternatively only one of
        rttMonLpdGrpStatsTargetPE
        OR crttMonIPLpdGrpStatsTargetPEAddrType/
        crttMonIPLpdGrpStatsTargetPEAddr may be used to specify the
        V4 IP address, in which case the other may either not be
        instantiated or contain a zero length string.
        In case the the target is a V6 IP address
        then only crttMonIPLpdGrpStatsTargetPEAddrType/
        crttMonIPLpdGrpStatsTargetPEAddr must be used and
        rttMonLpdGrpStatsTargetPE may not be instantiated or
        may have a zero length string."
  DEFVAL      { "" }
  ::= { crttMonIPLpdGrpStatsEntry 2 }

    Information by cisco_v1

    crttMonIPLpdGrpStatsTargetPEAddr OBJECT-TYPE
    SYNTAX InetAddress

    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A string which specifies the address of the target PE. 
         This object, in conjunction with the 
         crttMonIPLpdGrpStatsTargetPEAddrType object,
         may be used to specify either an IPv6 or an IPv4 address and is
         an alternative to the rttMonLpdGrpStatsTargetPE object, which
         can only specify an IPv4 address. In case the target is a V4
         IP address then both crttMonIPLpdGrpStatsTargetPEAddrType/
         crttMonIPLpdGrpStatsTargetPEAddr AND rttMonLpdGrpStatsTargetPE
         may be used to specify it so long as both try to specify the
         same V4 IP address. Alternatively only one of
         rttMonLpdGrpStatsTargetPE
         OR crttMonIPLpdGrpStatsTargetPEAddrType/
         crttMonIPLpdGrpStatsTargetPEAddr may be used to specify the
         V4 IP address, in which case the other may either not be
         instantiated or contain a zero length string.
         In case the the target is a V6 IP address
         then only crttMonIPLpdGrpStatsTargetPEAddrType/
         crttMonIPLpdGrpStatsTargetPEAddr must be used and
         rttMonLpdGrpStatsTargetPE may not be instantiated or
         may have a zero length string."
    DEFVAL { "" }
    ::= { crttMonIPLpdGrpStatsEntry 2 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-RTTMON-IP-EXT-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    crttMonIPLpdGrpStatsTargetPEAddr OBJECT-TYPE
  SYNTAX      InetAddress
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
       "A string which specifies the address of the target PE. 
        This object, in conjunction with the 
        crttMonIPLpdGrpStatsTargetPEAddrType object,
        may be used to specify either an IPv6 or an IPv4 address and is
        an alternative to the rttMonLpdGrpStatsTargetPE object, which
        can only specify an IPv4 address. In case the target is a V4
        IP address then both crttMonIPLpdGrpStatsTargetPEAddrType/
        crttMonIPLpdGrpStatsTargetPEAddr AND rttMonLpdGrpStatsTargetPE
        may be used to specify it so long as both try to specify the
        same V4 IP address. Alternatively only one of
        rttMonLpdGrpStatsTargetPE
        OR crttMonIPLpdGrpStatsTargetPEAddrType/
        crttMonIPLpdGrpStatsTargetPEAddr may be used to specify the
        V4 IP address, in which case the other may either not be
        instantiated or contain a zero length string.
        In case the the target is a V6 IP address
        then only crttMonIPLpdGrpStatsTargetPEAddrType/
        crttMonIPLpdGrpStatsTargetPEAddr must be used and
        rttMonLpdGrpStatsTargetPE may not be instantiated or
        may have a zero length string."
  DEFVAL      { "" }
  ::= { crttMonIPLpdGrpStatsEntry 2 }

    Information by cisco

    crttMonIPLpdGrpStatsTargetPEAddr OBJECT-TYPE
  SYNTAX      InetAddress
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
       "A string which specifies the address of the target PE. 
        This object, in conjunction with the 
        crttMonIPLpdGrpStatsTargetPEAddrType object,
        may be used to specify either an IPv6 or an IPv4 address and is
        an alternative to the rttMonLpdGrpStatsTargetPE object, which
        can only specify an IPv4 address. In case the target is a V4
        IP address then both crttMonIPLpdGrpStatsTargetPEAddrType/
        crttMonIPLpdGrpStatsTargetPEAddr AND rttMonLpdGrpStatsTargetPE
        may be used to specify it so long as both try to specify the
        same V4 IP address. Alternatively only one of
        rttMonLpdGrpStatsTargetPE
        OR crttMonIPLpdGrpStatsTargetPEAddrType/
        crttMonIPLpdGrpStatsTargetPEAddr may be used to specify the
        V4 IP address, in which case the other may either not be
        instantiated or contain a zero length string.
        In case the the target is a V6 IP address
        then only crttMonIPLpdGrpStatsTargetPEAddrType/
        crttMonIPLpdGrpStatsTargetPEAddr must be used and
        rttMonLpdGrpStatsTargetPE may not be instantiated or
        may have a zero length string."
  DEFVAL      { "" }
  ::= { crttMonIPLpdGrpStatsEntry 2 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.572.1.5.1.1 crttMonIPLpdGrpStatsTargetPEAddrType 0 0 An enumerated value which specifies the address type
    of the target.
    This object must be used along with the
    crttMonIPLpdGrpStatsTa…