This table allows users to configure and monitor
the preferred path fcroute-map parameters on all
the VSANs configured on the local switch.
A fcroute-map can be created per VSAN. For each
fcroute-map users can create multiple routes which
are identified by a route ID. Within each route
there can be multiple flows which are configured
using the cPrefPathRouteMapMatchTable table and
the corresponding outgoing interface for a route
can be configured using the
cPrefPathRouteMapSetTable table.
This table is the top-level table which is used to
configure the fcroute-map indexed by VSAN ID
and a route within a fcroute-map indexed by the
route ID of the route.
Entries in this table are created and deleted
using the cPrefPathRouteMapRowStatus object.
To create a row in this table, a manager must
set the cPrefPathRouteMapRowStatus object
to 'createAndGo' or 'createAndWait'. This will
create a route within a fcroute-map. There is
no need to configure instances of other
corresponding columns -
cPrefPathRouteMapIntfPrefStrict,
cPrefPathRouteMapRouteActive,
cPrefPathRouteMapActive in order to make the
newly created row to active.
To delete a row in this table, a manager must
set the cPrefPathRouteMapRowStatus object
to 'destroy'. This will delete a route within a
fcroute-map.
Parsed from file CISCO-PREFERRED-PATH-MIB.mib
Module: CISCO-PREFERRED-PATH-MIB
This table allows users to configure and monitor
the preferred path fcroute-map parameters on all
the VSANs configured on the local switch.
A fcroute-map can be created per VSAN. For each
fcroute-map users can create multiple routes which
are identified by a route ID. Within each route
there can be multiple flows which are configured
using the cPrefPathRouteMapMatchTable table and
the corresponding outgoing interface for a route
can be configured using the
cPrefPathRouteMapSetTable table.
This table is the top-level table which is used to
configure the fcroute-map indexed by VSAN ID
and a route within a fcroute-map indexed by the
route ID of the route.
Entries in this table are created and deleted
using the cPrefPathRouteMapRowStatus object.
To create a row in this table, a manager must
set the cPrefPathRouteMapRowStatus object
to 'createAndGo' or 'createAndWait'. This will
create a route within a fcroute-map. There is
no need to configure instances of other
corresponding columns -
cPrefPathRouteMapIntfPrefStrict,
cPrefPathRouteMapRouteActive,
cPrefPathRouteMapActive in order to make the
newly created row to active.
To delete a row in this table, a manager must
set the cPrefPathRouteMapRowStatus object
to 'destroy'. This will delete a route within a
fcroute-map.
This table allows users to configure and monitor
the preferred path fcroute-map parameters on all
the VSANs configured on the local switch.
A fcroute-map can be created per VSAN. For each
fcroute-map users can create multiple routes which
are identified by a route ID. Within each route
there can be multiple flows which are configured
using the cPrefPathRouteMapMatchTable table and
the corresponding outgoing interface for a route
can be configured using the
cPrefPathRouteMapSetTable table.
This table is the top-level table which is used to
configure the fcroute-map indexed by VSAN ID
and a route within a fcroute-map indexed by the
route ID of the route.
Entries in this table are created and deleted
using the cPrefPathRouteMapRowStatus object.
To create a row in this table, a manager must
set the cPrefPathRouteMapRowStatus object
to 'createAndGo' or 'createAndWait'. This will
create a route within a fcroute-map. There is
no need to configure instances of other
corresponding columns -
cPrefPathRouteMapIntfPrefStrict,
cPrefPathRouteMapRouteActive,
cPrefPathRouteMapActive in order to make the
newly created row to active.
To delete a row in this table, a manager must
set the cPrefPathRouteMapRowStatus object
to 'destroy'. This will delete a route within a
fcroute-map.
Parsed from file CISCO-PREFERRED-PATH-MIB.my.txt
Company: None
Module: CISCO-PREFERRED-PATH-MIB
This table allows users to configure and monitor
the preferred path fcroute-map parameters on all
the VSANs configured on the local switch.
A fcroute-map can be created per VSAN. For each
fcroute-map users can create multiple routes which
are identified by a route ID. Within each route
there can be multiple flows which are configured
using the cPrefPathRouteMapMatchTable table and
the corresponding outgoing interface for a route
can be configured using the
cPrefPathRouteMapSetTable table.
This table is the top-level table which is used to
configure the fcroute-map indexed by VSAN ID
and a route within a fcroute-map indexed by the
route ID of the route.
Entries in this table are created and deleted
using the cPrefPathRouteMapRowStatus object.
To create a row in this table, a manager must
set the cPrefPathRouteMapRowStatus object
to 'createAndGo' or 'createAndWait'. This will
create a route within a fcroute-map. There is
no need to configure instances of other
corresponding columns -
cPrefPathRouteMapIntfPrefStrict,
cPrefPathRouteMapRouteActive,
cPrefPathRouteMapActive in order to make the
newly created row to active.
To delete a row in this table, a manager must
set the cPrefPathRouteMapRowStatus object
to 'destroy'. This will delete a route within a
fcroute-map.
cPrefPathRouteMapTable OBJECT-TYPE SYNTAX SEQUENCE OF CPrefPathRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows users to configure and monitor the preferred path fcroute-map parameters on all the VSANs configured on the local switch. A fcroute-map can be created per VSAN. For each fcroute-map users can create multiple routes which are identified by a route ID. Within each route there can be multiple flows which are configured using the cPrefPathRouteMapMatchTable table and the corresponding outgoing interface for a route can be configured using the cPrefPathRouteMapSetTable table. This table is the top-level table which is used to configure the fcroute-map indexed by VSAN ID and a route within a fcroute-map indexed by the route ID of the route. Entries in this table are created and deleted using the cPrefPathRouteMapRowStatus object. To create a row in this table, a manager must set the cPrefPathRouteMapRowStatus object to 'createAndGo' or 'createAndWait'. This will create a route within a fcroute-map. There is no need to configure instances of other corresponding columns - cPrefPathRouteMapIntfPrefStrict, cPrefPathRouteMapRouteActive, cPrefPathRouteMapActive in order to make the newly created row to active. To delete a row in this table, a manager must set the cPrefPathRouteMapRowStatus object to 'destroy'. This will delete a route within a fcroute-map." ::= { ciscoPrefPathConfiguration 1 }
cPrefPathRouteMapTable OBJECT-TYPE SYNTAX SEQUENCE OF CPrefPathRouteMapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table allows users to configure and monitor the preferred path fcroute-map parameters on all the VSANs configured on the local switch. A fcroute-map can be created per VSAN. For each fcroute-map users can create multiple routes which are identified by a route ID. Within each route there can be multiple flows which are configured using the cPrefPathRouteMapMatchTable table and the corresponding outgoing interface for a route can be configured using the cPrefPathRouteMapSetTable table. This table is the top-level table which is used to configure the fcroute-map indexed by VSAN ID and a route within a fcroute-map indexed by the route ID of the route. Entries in this table are created and deleted using the cPrefPathRouteMapRowStatus object. To create a row in this table, a manager must set the cPrefPathRouteMapRowStatus object to 'createAndGo' or 'createAndWait'. This will create a route within a fcroute-map. There is no need to configure instances of other corresponding columns - cPrefPathRouteMapIntfPrefStrict, cPrefPathRouteMapRouteActive, cPrefPathRouteMapActive in order to make the newly created row to active. To delete a row in this table, a manager must set the cPrefPathRouteMapRowStatus object to 'destroy'. This will delete a route within a fcroute-map." ::= { ciscoPrefPathConfiguration 1 }
Vendor: Cisco
Module: CISCO-PREFERRED-PATH-MIB
[Automatically extracted from oidview.com]
cPrefPathRouteMapTable OBJECT-TYPE SYNTAX SEQUENCE OF CPrefPathRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows users to configure and monitor the preferred path fcroute-map parameters on all the VSANs configured on the local switch. A fcroute-map can be created per VSAN. For each fcroute-map users can create multiple routes which are identified by a route ID. Within each route there can be multiple flows which are configured using the cPrefPathRouteMapMatchTable table and the corresponding outgoing interface for a route can be configured using the cPrefPathRouteMapSetTable table. This table is the top-level table which is used to configure the fcroute-map indexed by VSAN ID and a route within a fcroute-map indexed by the route ID of the route. Entries in this table are created and deleted using the cPrefPathRouteMapRowStatus object. To create a row in this table, a manager must set the cPrefPathRouteMapRowStatus object to 'createAndGo' or 'createAndWait'. This will create a route within a fcroute-map. There is no need to configure instances of other corresponding columns - cPrefPathRouteMapIntfPrefStrict, cPrefPathRouteMapRouteActive, cPrefPathRouteMapActive in order to make the newly created row to active. To delete a row in this table, a manager must set the cPrefPathRouteMapRowStatus object to 'destroy'. This will delete a route within a fcroute-map." ::= { ciscoPrefPathConfiguration 1 }
cPrefPathRouteMapTable OBJECT-TYPE SYNTAX SEQUENCE OF CPrefPathRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows users to configure and monitor the preferred path fcroute-map parameters on all the VSANs configured on the local switch. A fcroute-map can be created per VSAN. For each fcroute-map users can create multiple routes which are identified by a route ID. Within each route there can be multiple flows which are configured using the cPrefPathRouteMapMatchTable table and the corresponding outgoing interface for a route can be configured using the cPrefPathRouteMapSetTable table. This table is the top-level table which is used to configure the fcroute-map indexed by VSAN ID and a route within a fcroute-map indexed by the route ID of the route. Entries in this table are created and deleted using the cPrefPathRouteMapRowStatus object. To create a row in this table, a manager must set the cPrefPathRouteMapRowStatus object to 'createAndGo' or 'createAndWait'. This will create a route within a fcroute-map. There is no need to configure instances of other corresponding columns - cPrefPathRouteMapIntfPrefStrict, cPrefPathRouteMapRouteActive, cPrefPathRouteMapActive in order to make the newly created row to active. To delete a row in this table, a manager must set the cPrefPathRouteMapRowStatus object to 'destroy'. This will delete a route within a fcroute-map." ::= { ciscoPrefPathConfiguration 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.592.1.1.1.1 | cPrefPathRouteMapEntry | 7 | 7 | A conceptual row in the cPrefPathRouteMapTable. There is an entry in this table for each route within a fcroute-map. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.592.1.1.2 | cPrefPathRouteMapGlobalTable | 1 | 2 | This table allows users to configure and monitor the preferred path fcroute-map global parameters. Entries in this table are aut… |
1.3.6.1.4.1.9.9.592.1.1.3 | cPrefPathRouteMapMatchTable | 1 | 7 | cPrefPathRouteMapMatchtable |
1.3.6.1.4.1.9.9.592.1.1.4 | cPrefPathRouteMapSetTable | 1 | 5 | This table allows to configure and monitor the set criteria for a route within a fcroute-map created using the cPrefPathRouteMapTa… |
1.3.6.1.4.1.9.9.592.1.1.5 | cPrefPathHwFailureNotifEnable | 1 | 1 | This variable indicates whether the system produces the ciscoPrefPathHWFailureNotify. A 'false' value for this object will preven… |