Reference record for OID 1.3.6.1.4.1.9.9.606.1.2.1.1.9

parent: 1.3.6.1.4.1.9.9.606.1.2.1.1 (clMeshLtEntry)
node code: 9
node name: clMeshLtDataRateValue
dot oid: 1.3.6.1.4.1.9.9.606.1.2.1.1.9
type: OBJECT-TYPE
asn1 oid: {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappMeshLinkTestMIB(606) ciscoLwappMeshLinkTestMIBObjects(1) ciscoLwappMeshLinkTestRun(2) clMeshLtTable(1) clMeshLtEntry(1) clMeshLtDataRateValue(9)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappMeshLinkTestMIB(606) ciscoLwappMeshLinkTestMIBObjects(1) ciscoLwappMeshLinkTestRun(2) clMeshLtTable(1) clMeshLtEntry(1) clMeshLtDataRateValue(9)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappMeshLinkTestMIB(606) ciscoLwappMeshLinkTestMIBObjects(1) ciscoLwappMeshLinkTestRun(2) clMeshLtTable(1) clMeshLtEntry(1) clMeshLtDataRateValue(9)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappMeshLinkTestMIB(606) ciscoLwappMeshLinkTestMIBObjects(1) ciscoLwappMeshLinkTestRun(2) clMeshLtTable(1) clMeshLtEntry(1) clMeshLtDataRateValue(9)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappMeshLinkTestMIB(606) ciscoLwappMeshLinkTestMIBObjects(1) ciscoLwappMeshLinkTestRun(2) clMeshLtTable(1) clMeshLtEntry(1) clMeshLtDataRateValue(9)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappMeshLinkTestMIB(606) ciscoLwappMeshLinkTestMIBObjects(1) ciscoLwappMeshLinkTestRun(2) clMeshLtTable(1) clMeshLtEntry(1) clMeshLtDataRateValue(9)}
iri oid: /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappMeshLinkTestMIB/ciscoLwappMeshLinkTestMIBObjects/ciscoLwappMeshLinkTestRun/clMeshLtTable/clMeshLtEntry/clMeshLtDataRateValue

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappMeshLinkTestMIB/ciscoLwappMeshLinkTestMIBObjects/ciscoLwappMeshLinkTestRun/clMeshLtTable/clMeshLtEntry/clMeshLtDataRateValue

/iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappMeshLinkTestMIB/ciscoLwappMeshLinkTestMIBObjects/ciscoLwappMeshLinkTestRun/clMeshLtTable/clMeshLtEntry/clMeshLtDataRateValue

/iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappMeshLinkTestMIB/ciscoLwappMeshLinkTestMIBObjects/ciscoLwappMeshLinkTestRun/clMeshLtTable/clMeshLtEntry/clMeshLtDataRateValue

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappMeshLinkTestMIB/ciscoLwappMeshLinkTestMIBObjects/ciscoLwappMeshLinkTestRun/clMeshLtTable/clMeshLtEntry/clMeshLtDataRateValue

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappMeshLinkTestMIB/ciscoLwappMeshLinkTestMIBObjects/ciscoLwappMeshLinkTestRun/clMeshLtTable/clMeshLtEntry/clMeshLtDataRateValue

Description by cisco_v1

This object represents the data rate on backhaul link
at which link test will be performed. Depending on the
backhaul radio type, data rate will vary.

If the value of clMeshNodeBackhaul object
is 'dot11a', data rates can be one of the
following possible values.
mbps6(4)
mbps9(5)
mbps12(7)
mbps18(8)
mbps24(9)
mbps36(10)
mbps48(11)
mbps54(12)
mbps108(13)

Additionally following data rates are supported if 802.11a
supports 11n.
htMcs0(14)
htMcs1(15)
htMcs2(16)
htMcs3(17)
htMcs4(18)
htMcs5(19)
htMcs6(20)
htMcs7(21)
htMcs8(22)
htMcs9(23)
htMcs10(24)
htMcs11(25)
htMcs12(26)
htMcs13(27)
htMcs14(28)
htMcs15(29)

If the value of clMeshNodeBackhaul object
is 'dot11b', then data rate can be one of
the following possible values.
mbps1(1)
mbps2(2)
mbps5point5(3)
mbps6(4)
mbps9(5)
mbps11(6)

If the value of clMeshNodeBackhaul object
is 'dot11g', then data rate can be one of
the following possible values.

mbps1(1)
mbps2(2)
mbps5point5(3)
mbps6(4)
mbps9(5)
mbps11(6)
mbps12(7)
mbps18(8)
mbps24(9)
mbps36(10)
mbps48(11)
mbps54(12)
mbps108(13)

This object cannot be modified when the value
of clMeshLtRowStatus object in the same row is 'active'.

Description by cisco

Information by cisco_v1

clMeshLtDataRateValue OBJECT-TYPE
    SYNTAX INTEGER {
        mbps1(1),
        mbps2(2),
        mbps5point5(3),
        mbps6(4),
        mbps9(5),
        mbps11(6),
        mbps12(7),
        mbps18(8),
        mbps24(9),
        mbps36(10),
        mbps48(11),
        mbps54(12),
        mbps108(13),
        htMcs0(14),
        htMcs1(15),
        htMcs2(16),
        htMcs3(17),
        htMcs4(18),
        htMcs5(19),
        htMcs6(20),
        htMcs7(21),
        htMcs8(22),
        htMcs9(23),
        htMcs10(24),
        htMcs11(25),
        htMcs12(26),
        htMcs13(27),
        htMcs14(28),
        htMcs15(29)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object represents the data rate on backhaul link
        at which link test will be performed. Depending on the 
        backhaul radio type, data rate will vary. 
        
        If the value of clMeshNodeBackhaul object
        is 'dot11a', data rates can be one of the 
        following possible values. 
        mbps6(4)
        mbps9(5)
        mbps12(7)
        mbps18(8)
        mbps24(9)
        mbps36(10)
        mbps48(11)
        mbps54(12)
        mbps108(13)
        
        Additionally following data rates are supported if 802.11a 
        supports 11n.
        htMcs0(14)
        htMcs1(15)
        htMcs2(16)
        htMcs3(17)
        htMcs4(18)
        htMcs5(19)
        htMcs6(20)
        htMcs7(21)
        htMcs8(22)
        htMcs9(23)
        htMcs10(24)
        htMcs11(25)
        htMcs12(26)
        htMcs13(27)
        htMcs14(28)
        htMcs15(29)
        
        If the value of clMeshNodeBackhaul object
        is 'dot11b', then data rate can be one of 
        the following possible values.
        mbps1(1)
        mbps2(2)
        mbps5point5(3)
        mbps6(4)
        mbps9(5)
        mbps11(6)
        
        If the value of clMeshNodeBackhaul object
        is 'dot11g', then data rate can be one of
        the following possible values.
        
        mbps1(1)
        mbps2(2)
        mbps5point5(3)
        mbps6(4)
        mbps9(5)
        mbps11(6)
        mbps12(7)
        mbps18(8)
        mbps24(9)
        mbps36(10)
        mbps48(11)
        mbps54(12)
        mbps108(13)
        
        This object cannot be modified when the value 
        of clMeshLtRowStatus object in the same row is 'active'."
    ::= { clMeshLtEntry 9 }

Information by cisco

clMeshLtDataRateValue OBJECT-TYPE
    SYNTAX          INTEGER  {
                        mbps1(1),
                        mbps2(2),
                        mbps5point5(3),
                        mbps6(4),
                        mbps9(5),
                        mbps11(6),
                        mbps12(7),
                        mbps18(8),
                        mbps24(9),
                        mbps36(10),
                        mbps48(11),
                        mbps54(12),
                        mbps108(13),
                        htMcs0(14),
                        htMcs1(15),
                        htMcs2(16),
                        htMcs3(17),
                        htMcs4(18),
                        htMcs5(19),
                        htMcs6(20),
                        htMcs7(21),
                        htMcs8(22),
                        htMcs9(23),
                        htMcs10(24),
                        htMcs11(25),
                        htMcs12(26),
                        htMcs13(27),
                        htMcs14(28),
                        htMcs15(29)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object represents the data rate on backhaul link
        at which link test will be performed. Depending on the 
        backhaul radio type, data rate will vary. 

        If the value of clMeshNodeBackhaul object
        is 'dot11a', data rates can be one of the 
        following possible values. 
        mbps6(4)
        mbps9(5)
        mbps12(7)
        mbps18(8)
        mbps24(9)
        mbps36(10)
        mbps48(11)
        mbps54(12)
        mbps108(13)

        Additionally following data rates are supported if 802.11a 
        supports 11n.
        htMcs0(14)
        htMcs1(15)
        htMcs2(16)
        htMcs3(17)
        htMcs4(18)
        htMcs5(19)
        htMcs6(20)
        htMcs7(21)
        htMcs8(22)
        htMcs9(23)
        htMcs10(24)
        htMcs11(25)
        htMcs12(26)
        htMcs13(27)
        htMcs14(28)
        htMcs15(29)

        If the value of clMeshNodeBackhaul object
        is 'dot11b', then data rate can be one of 
        the following possible values.
        mbps1(1)
        mbps2(2)
        mbps5point5(3)
        mbps6(4)
        mbps9(5)
        mbps11(6)

        If the value of clMeshNodeBackhaul object
        is 'dot11g', then data rate can be one of
        the following possible values.

        mbps1(1)
        mbps2(2)
        mbps5point5(3)
        mbps6(4)
        mbps9(5)
        mbps11(6)
        mbps12(7)
        mbps18(8)
        mbps24(9)
        mbps36(10)
        mbps48(11)
        mbps54(12)
        mbps108(13)

        This object cannot be modified when the value 
        of clMeshLtRowStatus object in the same row is 'active'." 
    ::= { clMeshLtEntry 9 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Brothers (8)

OID	Name	Description
1.3.6.1.4.1.9.9.606.1.2.1.1.1	clMeshLtIndex	This object uniquely identifies one particular run of the linktest initiated between the two mesh node neighbors identified by cl…
1.3.6.1.4.1.9.9.606.1.2.1.1.2	clMeshLtSrcMacAddress	This object represents the source mac address of AP which initiates the link test to 'clMeshLtDestMacAddress' involved in the par…
1.3.6.1.4.1.9.9.606.1.2.1.1.3	clMeshLtDestMacAddress	This object represents the destination mac address of AP involved in the particular run of linktest. This object must be set to a…
1.3.6.1.4.1.9.9.606.1.2.1.1.4	clMeshLtDataRate	This object represents the data rate on backhaul link at which link test will be performed. Depending on the backhaul radio type,…
1.3.6.1.4.1.9.9.606.1.2.1.1.5	clMeshLtPktsPerSec	This object represents the number of packets to be sent per sec during link test.
1.3.6.1.4.1.9.9.606.1.2.1.1.6	clMeshLtPktSize	This object represents the size of packets to be sent during link test.
1.3.6.1.4.1.9.9.606.1.2.1.1.7	clMeshLtDuration	This object represents the duration, in seconds, of link test to be performed.
1.3.6.1.4.1.9.9.606.1.2.1.1.8	clMeshLtRowStatus	This object is the status column used for creating and deleting instances of the columnar objects in this table.